u-boot.git/include, branch v2016.07-rc3

ti_omap5_common: Find right dtb file for DRA72-RevC Evm

2016-07-01T21:42:57+00:00

DRA72-Evm revC uses dra72-evm-revc.dtb. Update the same in env vatiables.

Signed-off-by: Lokesh Vutla

autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK

2016-07-01T21:42:55+00:00

As the help message of CONFIG_BOOTDELAY says, CONFIG_BOOTDELAY=-2
means the autoboot with no delay, with no abort check even if
CONFIG_ZERO_BOOTDELAY_CHECK is defined.

To sum up, the autoboot behaves as follows:

 [1] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=y
    autoboot with no delay, but you can abort it by key input

 [2] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    autoboot with no delay, with no check for abort

 [3] CONFIG_BOOTDELAY=-1
    disable autoboot

 [4] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

As you notice, [2] and [4] come to the same result, which means we
do not need CONFIG_ZERO_BOOTDELAY_CHECK.  We can control all the
cases only by CONFIG_BOOTDELAY, like this:

 [1] CONFIG_BOOTDELAY=0
    autoboot with no delay, but you can abort it by key input

 [2] CONFIG_BOOTDELAY=-1
    disable autoboot

 [3] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

This commit converts the logic as follow:
  CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    --> CONFIG_BOOTDELAY=-2

Signed-off-by: Masahiro Yamada 
Reviewed-by: Stefan Roese 
Acked-by: Igor Grinberg 
Reviewed-by: Simon Glass 
Acked-by: Vladimir Zapolskiy 
Reviewed-by: Heiko Schocher 
Acked-by: Christian Riesch 
Acked-by: Hannes Schmelzer

ARM: socfpga: move CONFIG_BOOTDELAY to Kconfig for IS1 board

2016-07-01T21:42:54+00:00

This recently added board missed the tree-wide migration of
CONFIG_BOOTDELAY.

Signed-off-by: Masahiro Yamada 
Acked-by: Pavel Machek 
Reviewed-by: Heiko Schocher 
Reviewed-by: Stefan Roese

Merge git://git.denx.de/u-boot-fsl-qoriq

2016-06-28T19:59:05+00:00

mmc: fsl: introduce wp_enable

2016-06-28T19:08:53+00:00

Introudce wp_enable. To check WPSPL, wp_enable needs to be set
to 1 in board code.

Take i.MX6UL for example, for some boards, they do not use WP singal,
so they does not configure USDHC1_WP_SELECT_INPUT, and its default
value is 0(GPIO1_IO02). However GPIO1_IO02 is muxed for i2c usage and
SION bit set. So USDHC controller can always get wp signal and WPSPL
shows write protect and blocks driver continuing. This is not what
we want to see, so add wp_enable, and if set to 0, just omit the
WPSPL checking and this does not effect normal working of usdhc
controller.

If wp-gpios is provided in dts, wp_enable is set to 1, otherwise 0.

Signed-off-by: Peng Fan 
Cc: Pantelis Antoniou 
Cc: York Sun 
Cc: Stefano Babic 
Cc: Fabio Estevam 
Tested-by: Fabio Estevam 
Reviewed-by: York Sun

mmc: fsl: reset to normal boot mode when eMMC fast boot

2016-06-28T19:08:53+00:00

When booting in eMMC fast boot, MMC host does not exit from
boot mode after bootrom loading image. So the first command
'CMD0' sent in uboot will pull down the CMD line to low and
cause errors.

This patch cleans the MMC boot register in "mmc_init" to put the
MMC host back to normal mode.

Also clear DLL_CTRL delay line settings at USDHC initialization
to eliminate the pre-settings from boot rom.

Signed-off-by: Peng Fan 
Cc: Pantelis Antoniou 
Cc: York Sun 
Cc: Stefano Babic 
Cc: Fabio Estevam 
Tested-by: Fabio Estevam 
Reviewed-by: York Sun

armv8: ls1043aqds: print FPGA info early for QSPI boot

2016-06-28T19:08:53+00:00

Now I2C is initialized early enough to access FPGA so it supports to
show board info as early as other boot methods.

Signed-off-by: Gong Qianyu 
Reviewed-by: York Sun

armv8: ls1043aqds: use configurable clock

2016-06-28T19:08:43+00:00

Get the clocks from FPGA through I2C, if IFC is disabled.

Signed-off-by: Gong Qianyu 
Reviewed-by: York Sun

fastboot: sparse: implement reserve()

2016-06-27T20:37:39+00:00

In order to process the CHUNK_TYPE_DONT_CARE properly, there is
a requirement to be able to 'reserve' a specified number of blocks
in the storage media. Because of the special handling of "bad blocks"
in NAND devices, this is implemented in a storage abstraction function.

Signed-off-by: Steve Rae 
Reviewed-by: Maxime Ripard

fastboot: sparse: resync common/image-sparse.c (part 2)

2016-06-27T20:37:38+00:00

- update fastboot_okay() and fastboot_fail()

This file originally came from upstream code.

While retaining the storage abstraction feature, this is the second
set of the changes required to resync with the
  cmd_flash_mmc_sparse_img()
in the file
  aboot.c
from
  https://us.codeaurora.org/cgit/quic/la/kernel/lk/plain/app/aboot/aboot.c?h=LE.BR.1.2.1

Signed-off-by: Steve Rae