u-boot.git/include, branch v2016.11

net: phy: micrel: center FLP burst timing at 16ms

2016-11-07T17:28:16+00:00

Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms
specified by the IEEE802.3 standard from the chip's default of 8ms.

For more details, see the "Auto-Negotiation Timing" section of the
KSZ9031RNX datasheet.

[1] https://patchwork.kernel.org/patch/6558371/

Signed-off-by: Ash Charles 
Acked-by: Joe Hershberger

colibri_pxa270: drop lzma support for space reason

2016-11-05T11:27:43+00:00

As the upcoming driver model integration takes up some more precious flash
space first make sure to drop expensive LZMA support.

Signed-off-by: Marcel Ziswiler

Merge git://git.denx.de/u-boot-rockchip

2016-11-02T13:41:20+00:00

Fix spelling of "resetting".

2016-10-31T14:13:17+00:00

Cover-Letter: Fixes several spelling errors for the words "resetting",
  "extended", "occur", and "multiple".

Signed-off-by: Vagrant Cascadian 
Reviewed-by: Simon Glass

OMAP3: omap3_logic: Add scripts to boot over network.

2016-10-31T14:13:15+00:00

Not all networks have a DHCP server configured properly, so these
scripts make it easier to boot in that scenario.

Signed-off-by: Adam Ford 
Reviewed-by: Tom Rini

OMAP3: omap3_logic: Remove LCD preboot info

2016-10-31T14:13:15+00:00

The LCD isn't supported in U-Boot and the LCD is now configured in
the device tree, so this code is pointless.

V2: Eliminiate erroneous newline.

Signed-off-by: Adam Ford 
Reviewed-by: Tom Rini

rockchip: use rockchip linux partitions layout

2016-10-30T19:29:06+00:00

Unify the partitions of each chip then it will be more easy for us to
write scripts, tools or guides for rockchip chips.

Those extra partitions mostly are used to be compatible with our
internal loaders (such as miniloader which was same as spl,  or
android loader then we can support dual boot)

Signed-off-by: Jacob Chen 
Reviewed-by: Kever Yang

evb-rk3399: config: set emmc as default boot dev

2016-10-30T19:29:06+00:00

rk3399 has two mmc dev controller:
mmc 0: SD card;
mmc 1: EMMC

U-Boot will scan the mmc boot device configured by CONFIG_SYS_MMC_ENV_DEV,
since evb has emmc on board, let's set the EMMC as default.

Signed-off-by: Kever Yang

rockchip: RK3288 needs fdt and initrd below 256M now

2016-10-30T19:29:05+00:00

I am not sure why this limit is changing. But my kernel
doesn't load when it's above 256. This was testing on the
rock2 board.

Signed-off-by: Sandy Patterson 
Updated commit subject:
Signed-off-by: Simon Glass

sunxi: A64: enable USB support

2016-10-30T10:38:04+00:00

Mostly by adding MACH_SUN50I to some existing #ifdefs enable support
for the the HCI0 USB host controller on the A64.
Fix up some minor 64-bit hiccups on the way.
Add the bare minimum DT bits to the A64 .dtsi and enable the controllers
and the PHY on the Pine64.
This is limited to the first USB controller at the moment, which is
connected to the lower USB socket on the Pine64 board.
[Andre: remove unneeded defines, enable OHCI, add commit message]

Signed-off-by: Amit Singh Tomar 
Signed-off-by: Andre Przywara 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede