u-boot.git/include, branch v2016.11-rc1

Merge git://git.denx.de/u-boot-rockchip

2016-10-03T13:09:29+00:00

ti_armv7_common: Disable Falcon Mode on HS devices

2016-10-02T12:10:03+00:00

Authentication of images in Falcon Mode is not supported. Do not enable
SPL_OS_BOOT when TI_SECURE_DEVICE is enabled. This prevents attempting
to directly load kernel images which will fail, for security reasons,
on HS devices, the board is locked if a non-authenticatable image load
is attempted, so we disable attempting Falcon Mode.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Acked-by: Lokesh Vutla

config: Remove usage of CONFIG_STORAGE_EMMC

2016-10-02T12:10:03+00:00

This config option seems to be unused and is probably vestigial.
Remove it.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Acked-by: Lokesh Vutla

Kconfig: Separate AM33XX SOC config from target board config

2016-10-02T12:09:58+00:00

The config option AM33XX is used in several boards and should be
defined as a stand-alone option for this SOC. We break this out
from target boards that use this SoC and common headers then enable
AM33XX on in all the boards that used these targets to eliminate any
functional change with this patch.

This is similar to what has already been done in
9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig")
and is done for the same reasons.

Signed-off-by: Andrew F. Davis 
Acked-by: Lokesh Vutla 
Reviewed-by: Tom Rini

ti_omap5_common: mark region of DRAM protected on HS parts

2016-10-02T12:09:57+00:00

If the ending portion of the DRAM is reserved for secure
world use, then u-boot cannot use this memory for its relocation
purposes. To prevent issues, we mark this memory as PRAM and this
prevents it from being used by u-boot at all.

Signed-off-by: Daniel Allred

rockchip: add boot-mode support for rk3288, rk3036

2016-10-02T00:36:55+00:00

rockchip platform have a protocol to pass the the kernel reboot mode to bootloader
by some special registers when system reboot. In bootloader we should read it and take action.

We can only setup boot_mode in board_late_init becasue "setenv" need env setuped.
So add CONFIG_BOARD_LATE_INIT to common header and use a entry "rk_board_late_init"
to replace "board_late_init" in board file.

Signed-off-by: Jacob Chen 
Acked-by: Simon Glass

rockchip: move partitons define from 3036-kylin to 3036-common

2016-10-02T00:36:55+00:00

To keep it same with 3288.

Signed-off-by: Jacob Chen 
Acked-by: Simon Glass

rockchip: miniarm: remove eMMC support

2016-10-02T00:35:01+00:00

The latest rk3288-miniarm board doesn't have eMMC device, so remove it.

Signed-off-by: Ziyuan Xu 
Acked-by: Simon Glass

rockchip: add usb mass storage feature support for rk3036

2016-10-02T00:35:01+00:00

Enable ums feature for rk3036 boards, so that we can mount the mmc
device to PC.

Signed-off-by: jacob2.chen 
Acked-by: Simon Glass

Enable ROCKCHIP_SPL_BACK_TO_BROM for rock2 board

2016-10-02T00:35:01+00:00

Rock2 has been tested with back to brom feature. The tricky part is that
with this feature the default environment is inside u-boot, and it's
defined for every rk3288 board independetly. So I just changed it for
rock2 here if ROCKCHIP_SPL_BACK_TO_BROM.

Solve by moving environment after u-boot before 1M boundary

Signed-off-by: Sandy Patterson 
Acked-by: Simon Glass