u-boot.git/include, branch v2017.01-rc3

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2017-01-02T21:32:05+00:00

configs: engicam: Add fitboot env support

2017-01-02T16:34:11+00:00

Add FIT image booting from MMC device, during MMC bootcmd
u-boot env script look for bootscript, else fit image or else
finally look for legacy image uImage.

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

configs: engicam: Cleanup on mmcboot env

2017-01-02T16:34:11+00:00

- Add tab space
- remove exctra 'mmc dev ${mmcdev}'

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

configs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACY

2017-01-02T16:34:11+00:00

Enabling FIT along with Signature will make bootm to
not-understanding u-boot legacy image formats like uImage, etc.
So this patch enabling legacy image format for backward compatibility.

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

defconfigs: imx6: engicam: Enable FIT

2017-01-02T16:34:11+00:00

Enable Flattened Image Tree support for all Engicam boards.

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

imx6: engicam: Add nandboot env support

2017-01-02T16:30:51+00:00

Add config options for booting Linux from NAND in UBI format.

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

defconfigs: engicam: Enable UBI commands

2017-01-02T16:30:51+00:00

Create ubifs.img:
$ mkfs.ubifs -q -r /rootfs -m 4096 -e 253952 -c 7936 -o ubifs.img

Write ubifs.img:
---------------
icorem6qdl> nand erase.part rootfs
icorem6qdl> ubi part rootfs
icorem6qdl> ubi create rootfs

icorem6qdl> ext4load mmc 0:2 ${loadaddr} ubifs.img
166592512 bytes read in 8091 ms (19.6 MiB/s)
icorem6qdl> ubi write ${loadaddr} rootfs ${filesize}
166592512 bytes written to volume rootfs
icorem6qdl> ubifsmount ubi0:rootfs

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

configs: engicam: Rename nand with gpmi-name in mtdparts

2017-01-02T16:25:05+00:00

gpmi-nand is the proper name used in nand driver from Linux for all
imx related nand boards, so rename mtdparts name as gpmi-nand instead
of nand, this will eventually reflects all nand info to Linux from
u-boot like mtdparts.

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

imx6: engicam: Use bootm instead of bootz

2017-01-02T16:25:05+00:00

Boot Linux with uImage instead of zImage, so update
bootz with bootm.

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

configs: engicam: Increase nand kernel partition size

2017-01-02T16:22:22+00:00

Increase the nand kernel partition size, for supporting
large uImage files, maximum 8MiB.

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki