u-boot.git/include, branch v2017.05-rc3

meson: gxbb: change ramdisk_addr_r

2017-05-01T16:38:17+00:00

0x10000000 is the start of a 2 MiB area used by the
ARM Trusted Firmware (BL31).

See
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/arch/arm64/boot/dts/amlogic/meson-gx.dtsi?id=refs/tags/v4.10.10

So we should not load the ramdisk here.

The legacy Ubuntu image for the Odroid C2 comes with the
following line in boot.ini:
setenv initrd_loadaddr "0x13000000"

See
http://odroid.in/ubuntu_16.04lts/ubuntu64-16.04-minimal-odroid-c2-20160815.img.xz
http://deb.odroid.in/c2/pool/main/u/u-boot/u-boot_20170226-752a100-8_arm64.deb

So let's use the same address.

With the patch booting Linux with booti succeeds on an Odroid C2,
without the patch Linux hangs.

Cc: Andreas Färber 
Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass 
Tested-by: Vagrant Cascadian

meson: gxbb: enable MMC as boot target

2017-05-01T15:49:48+00:00

To enable automatic booting from SD card or eMMC the MMC
devices 0, 1, and 2 are added to the BOOT_TARGET_DEVICES.

Booting from SD card, eMMC, and DHCP are tried in sequence.
A missing or failing device is gracefully handled.

Cc: Andreas Färber 
Signed-off-by: Heinrich Schuchardt 
Tested-by: Vagrant Cascadian 
Reviewed-by: Andreas Färber 
Tested-by: Andreas Färber

cmd: add Kconfig option for 'date' command

2017-05-01T13:04:56+00:00

Signed-off-by: Chris Packham 
[trini: default y if DM_RTC, re-sync]
Signed-off-by: Tom Rini

powerpc: Drop configs/manroland

2017-04-30T17:41:02+00:00

This is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass

Convert CONFIG_CMD_DISPLAY to Kconfig

2017-04-30T17:41:01+00:00

This converts the following to Kconfig:
   CONFIG_CMD_DISPLAY

Signed-off-by: Simon Glass

Convert CONFIG_CMD_DIAG to Kconfig

2017-04-30T17:41:01+00:00

This converts the following to Kconfig:
   CONFIG_CMD_DIAG

Signed-off-by: Simon Glass 
[trini: imply CMD_DIAG on some keymile configs]
Signed-off-by: Tom Rini

Kconfig: Drop CONFIG_CMD_DFL

2017-04-30T17:41:00+00:00

This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass

Convert CONFIG_CMD_DEKBLOB to Kconfig

2017-04-30T17:41:00+00:00

This converts the following to Kconfig:
   CONFIG_CMD_DEKBLOB

Note: This option does not seem to actually be enabled by any board.

Signed-off-by: Simon Glass 
[trini: imply under SECURE_BOOT for mx5/6/7]
Signed-off-by: Tom Rini

Kconfig: Drop CONFIG_CMD_DEFAULTENV_VARS

2017-04-30T17:41:00+00:00

This option does not exist in U-Boot. Drop it.

Signed-off-by: Simon Glass

fs: Convert CONFIG_CMD_CRAMFS to Kconfig

2017-04-30T17:40:59+00:00

This converts the following to Kconfig:
   CONFIG_CMD_CRAMFS

Signed-off-by: Simon Glass 
[trini: imply CMD_CRAMFS for keymile]
Signed-off-by: Tom Rini