u-boot.git/include, branch v2017.07-rc3

powerpc: remove 4xx support

2017-07-03T21:35:28+00:00

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher

Merge git://git.denx.de/u-boot-arc

2017-06-29T19:28:51+00:00

ARM: at91: ma5d4: Support both SF and eMMC SoMs

2017-06-29T17:31:06+00:00

Discern the SoMs based on the presence of SPI flash to support both
variants of the SoM, one booting from SPI NOR and one booting from
eMMC.

Signed-off-by: Marek Vasut 
Cc: Andreas Bießmann

ARM: at91: ma5d4: Switch environment start to eMMC

2017-06-29T17:30:52+00:00

The redesigned version of the SoM which was released onto the market
does no longer contain SPI flash, but boots from the eMMC. Move the
environment storage to the eMMC.

Signed-off-by: Marek Vasut 
Cc: Andreas Bießmann

ARM: at91: ma5d4: Enable support for booting from eMMC

2017-06-29T17:30:51+00:00

The SoM has been redesigned to work around bug in the SoC and is now
capable of booting from the eMMC. Add support for booting from eMMC.

Signed-off-by: Marek Vasut 
Cc: Andreas Bießmann

ARM: at91: ma5d4: Swap SD/MMC controller order

2017-06-29T17:30:50+00:00

The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which
is the version available on the market. Swap the controller order
to match this and future versions of the SoM.

Signed-off-by: Marek Vasut 
Cc: Andreas Bießmann

ARM: at91: ma5d4: Enable DFU and UMS

2017-06-29T17:30:49+00:00

Enable DFU and USB mass storage support for the DENX MA5D4 SoM.

Signed-off-by: Marek Vasut 
Cc: Andreas Bießmann

ARM: atmel: Rename MA5D4EVK

2017-06-29T17:30:27+00:00

The board is now manufactured by Aries Embedded GmbH , rename it.

Signed-off-by: Marek Vasut

arc: Add support for HS Development Kit board

2017-06-29T16:34:10+00:00

ARC HS Development Kit board is a new low-cost
development platform sporting ARC HS38 in real silicon
with nice set of features such as:
 * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz
 * 4Gb of DDR (we use only lowest 1Gb out of it now)
 * Lots of DesigWare peripherals
 * Different connectivity modules:
     - Synopsys HAPS HT3
     - Arduino-compatible connector
     - MikroBUS

This initial commit supports the following peripherals:
 * UART (DW 8250)
 * Ethernet (DW GMAC)
 * SD/MMC (DW Mobile Storage)
 * USB 1.1 & 2.0

Signed-off-by: Alexey Brodkin

axs10x: Move environment from I2C EEPROM to SD-card

2017-06-29T16:34:10+00:00

With deprecation of I2C EEPROM we we left without a permamnent
storage for U-Boot environment, but luckily we may simply use SD-card
with FAT partition for that.

Having environment on SD-card is much more convenient as it
allows us to preserve all the settings when moving from one board to
another. Moreover instead of 256 bytes of EEPROM we're now virtually
unlimited in stuff being placed in environment like complicated scripts
etc which are usually required in case of full-scale distros.

Signed-off-by: Alexey Brodkin