u-boot.git/include, branch v2017.11

rockchip: configs: vyasa: Update falcon offsets

2017-11-10T13:08:22+00:00

Update the falcon offsets for args to 16MB and kernel to 17MB
Since the below commit updated U-Boot proper location along
with rockchip boot image offsets
"spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip"
(sha1: 8f4d62b403db45dfa8b1cadb9da9096c79b7df47)

Signed-off-by: Jagan Teki 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

2017-11-09T13:11:40+00:00

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2017-11-09T13:11:30+00:00

imx:display5: Add support for LWN's DISPLAY5 board

2017-11-09T10:32:49+00:00

This commit provides support for LWN's IMX6Q based DISPLAY5 board.

Signed-off-by: Lukasz Majewski

sunxi: fix CONFIG_SUNXI_EMAC references

2017-11-09T09:09:09+00:00

fixes CONFIG_SUNXI_EMAC references from drivers/net/Makefile and
include/configs/sunxi-common.h likely forgotten in:
	commit abc3e4df59f5 ("sunxi: Convert SUNXI_EMAC to Kconfig")

Signed-off-by: Artturi Alm 
Reviewed-by: Jagan Teki

mmc: fsl_esdhc: Fix PIO timeout

2017-11-07T09:26:27+00:00

The following error has been observed on i.MX25 with a high-speed SDSC
card:
    Data Write Failed in PIO Mode.

It was caused by the timeout set on PRSSTAT.BWEN, which was triggered
because this bit takes 15 ms to be set after writing the first block to
DATPORT with this card. Without this timeout, all the blocks are
properly written.

This timeout was implemented by decrementing a variable, so it was
depending on the CPU frequency. Fix this issue by setting this timeout
to a long enough absolute duration (500 ms).

Signed-off-by: Benoît Thébaudeau 
Cc: Stefano Babic 
Cc: Fabio Estevam 
Cc: Jaehoon Chung 
Reviewed-by: Fabio Estevam 
Reviewed-by: Jagan Teki

mx25: Move MX25 selection to Kconfig

2017-11-07T09:12:50+00:00

The motivation for moving MX25 selection to Kconfig is to be
able to better handle MX25 specific errata, so that an errata option
can be selected at SoC level instead of board level.

This selection method also aligns with the way other i.MX SoCs are
selected in U-Boot.

Signed-off-by: Fabio Estevam 
Acked-by: Sebastien Bourdelin 
Reviewed-by: Benoît Thébaudeau

rockchip: board: puma_rk3399: make env location selectable via Kconfig

2017-11-07T08:16:57+00:00

The environment storage location is selectable via Kconfig. We support
eMMC, SD and SPI-NOR as location for U-Boot. This adds support to store
the environment in the SPI-NOR additional to the default eMMC location.

Signed-off-by: Klaus Goger 
Signed-off-by: Philipp Tomsich

rockchip: config: use common CONFIG_ENV_SIZE for all SoCs

2017-11-07T08:16:56+00:00

All Rockchip SoCs use 32KB as CONFIG_ENV_SIZE.

Signed-off-by: Kever Yang 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich

rockchip: config: sync the ENV offset from rockchip legacy U-Boot

2017-11-07T08:16:56+00:00

Using the ENV offset from rockchip legacy U-Boot for all SoCs,
the offset is 4MB-32KB

Signed-off-by: Kever Yang 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich