u-boot.git/include, branch v2018.11

configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS

2018-11-14T15:53:27+00:00

Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
that had been enabling it turn it on by hand.  This exposed that we had
not yet migrated CMD_MTDPARTS fully, so do so now.

Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
Signed-off-by: Tom Rini

mmc: dw_mmc: Add RCRC handling

2018-11-10T13:16:30+00:00

This patch adds check for command response CRC failure. The driver
is currently ignoring CRC check failure on command resposes which
have CRC atteched to it, which can be potentially dangerous. Even
more grueling problem happens when the command response is followed
by data transfer though, as in that case, the dwmci_data_transfer()
function will spin until it reaches the 240s timeout.

Signed-off-by: Marek Vasut 
Cc: Heiko Stuebner 
Cc: Philipp Tomsich

Revert "board_f: Use static print_cpuinfo if CONFIG_CPU is active"

2018-11-07T17:13:35+00:00

This reverts commit c0434407b595f785fc7401237896c48c791b45fd.

It turns out commit c0434407b595 broke some boards which have DM CPU
driver with CONFIG_DISPLAY_CPUINFO option on. These boards just fail
to boot when print_cpuinfo() is called during boot.

Fixes are already sent to ML and in u-boot-dm/next, however since
we are getting close to the v2018.11 release, it's safer we revert
the original commit.

This commit should be reverted after v2018.11 release.

Signed-off-by: Bin Meng 
Acked-by: Peng Fan 
Reviewed-by: Simon Glass

arm: zynq: Setup non zero SPL FIT load address

2018-11-07T09:07:31+00:00

Default setup is 0 which is incorrect place because it points to OCM
which is allocated for SPL only in our case.
Use address in DDR.

Signed-off-by: Michal Simek

Merge tag 'arc-for-2018.11' of git://git.denx.de/u-boot-arc

2018-11-02T13:39:18+00:00

Just 2 non-functinal changes:

 1. Rename of EMDK to EMSDP so it matches real marketing name
 2. Add essential README for IoTDK

emdk->emsdp: Rename board

2018-11-01T20:04:05+00:00

Real marketing name of the board was recently updated so
to accommodate that change renaming the board and all
related to it.

Signed-off-by: Alexey Brodkin

arm: ti: boot: Don't read environment partition

2018-11-01T14:02:43+00:00

This part should've been remove in commit 88d60db01168 ("arm: ti: boot:
Remove environment partition"), but I missed it somehow. Remove reading
dtb file from environment partition on eMMC, as we don't have it
anymore.

Signed-off-by: Sam Protsenko

configs: at91: at91sam9x5ek: fix bootcmd for NAND flash

2018-11-01T14:02:10+00:00

The default bootcommand needs to be accurate w.r.t the nand memory map
at http://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91sam9x5ekMainPage#NAND_Flash_demo_Memory_map

Updated to load kernel + dtb at right offsets and boot the zImage.

Signed-off-by: Eugen Hristev

Merge branch 'master' of git://git.denx.de/u-boot-socfpga

2018-10-31T21:15:55+00:00

arm: socfpga: Fix bootcounter located at the end of internal SRAM

2018-10-31T00:41:10+00:00

Commit 768f23dc8ae3 ("ARM: socfpga: Put stack at the end of SRAM") broke
those socfpga boards that keep the bootcounter at the end of the
internal SRAM as the bootcounter needs 8 bytes by default and thus the
very first SPL call to board_init_f_alloc_reserve overwrites the
bootcounter.

This patch allows to move the initial stack pointer down a bit by
checking if CONFIG_SYS_BOOTCOUNT_ADDR is located in the internal SRAM
area and then using this address as location for the start of the
stack pointer.

No new macros / defines are added by this approach.

Signed-off-by: Stefan Roese 
Cc: Marek Vasut 
Cc: Simon Goldschmidt