u-boot.git/include, branch v2019.07-rc4

Merge tag 'video-updates-for-2019.07-rc3' of git://git.denx.de/u-boot-video

2019-06-10T13:41:19+00:00

- mxsfb DM_VIDEO conversion
- splash fix for DM_VIDEO configurations
- meson HDMI fix for boards without hdmi-supply regulator

Merge branch 'master' of git://git.denx.de/u-boot-tegra

2019-06-08T13:10:31+00:00

The bulk of these changes are an effort to unify Tegra186 builds with
builds of prior 64-bit Tegra generations. On top of that there are
various improvements that allow data (such as the MAC address and boot
arguments) to be passed through from early firmware to the kernel on
boot.

lib/vsprintf: allow printing upper case GUIDs

2019-06-07T14:52:30+00:00

In the UEFI context GUIDs are expected to be rendered in upper case.

The patch uses the formerly unused bit 1 of the parameter str_format
of function uuid_bin_to_str() to indicate if we need upper or lower case
output.

Function uuid_string() in vsprint.c is adjusted to correctly set the bit
depending on the print format code.

%pUb: 01020304-0506-0708-090a-0b0c0d0e0f10
%pUB: 01020304-0506-0708-090A-0B0C0D0E0F10
%pUl: 04030201-0605-0807-090a-0b0c0d0e0f10
%pUL: 04030201-0605-0807-090A-0B0C0D0E0F10

Up to this point only a diagnostic message in mount_ubifs() using '%pUB' is
concerned by the change. Further patches are needed to adjust the UEFI
subsystem.

A unit test is provided inside the ut_print command.

Signed-off-by: Heinrich Schuchardt

Merge tag 'efi-2019-07-rc4-2' of git://git.denx.de/u-boot-efi

2019-06-05T19:53:18+00:00

Pull request for UEFI sub-system for v2019.07-rc4-2

Support for managing the non-volatile attribute of UEFI variables
is added though we do not have a backend for persistence yet.

Error messages for changes of UEFI variables are provided.

UEFI boottime service implementations are corrected.

ARM: tegra: Allow boards to override boot target devices

2019-06-05T16:16:34+00:00

Boards may not support all the boot target devices in the default list
for Tegra devices. Allow a board to override the list and default to the
standard list only if the board hasn't specified one itself.

Signed-off-by: Thierry Reding 
Signed-off-by: Tom Warren

lib: Implement strndup()

2019-06-05T16:16:32+00:00

Signed-off-by: Thierry Reding 
Signed-off-by: Tom Warren

fdtdec: Add fdtdec_set_ethernet_mac_address()

2019-06-05T16:16:32+00:00

This function can be used to set the local MAC address for the default
Ethernet interface in its device tree node. The default interface is
identified by the "ethernet" alias.

One case where this is useful is for devices that store their MAC
address in a custom location. Once extracted, board code can store the
MAC address in U-Boot's control DTB so that it will automatically be
used by the Ethernet uclass.

Signed-off-by: Thierry Reding 
Signed-off-by: Tom Warren

configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT

2019-06-05T16:14:02+00:00

This adds a define for CONFIG_SKIP_LOWLEVEL_INIT in the legoev3 config.
On the EV3, U-Boot is loaded into RAM by another bootloader, so we
don't need the lowlevel init in U-Boot.

Signed-off-by: David Lechner 
Signed-off-by: Bartosz Golaszewski

riscv: Add Microchip MPFS Icicle board support

2019-06-05T05:19:24+00:00

This patch adds Microchip MPFS Icicle board support.
For now, NS16550 serial driver is only enabled.
The Microchip MPFS Icicle defconfig by default builds
U-Boot for M-Mode with SMP support.

Signed-off-by: Padmarao Begari 
Reviewed-by: Bin Meng 
Reviewed-by: Lukas Auer

riscv: increase the environment size for the qemu-riscv platform to 128kB

2019-06-05T05:19:08+00:00

The existing default size of 4kB is too small as the default environment
has already nearly that size and defining a single additional environment
variable can exceed the available space.

Signed-off-by: Karsten Merker 
Reviewed-by: Bin Meng