- fix logo on mx6ul_14x14_evk with DM_VIDEO enabled
- fix banner string overwriting the logo on small displays
- fix splash warning when building for ARM64
- fix STM32 DSI driver to probe only on supported hardware
- fix memory corruption with DSI panel drivers

Add new fields "lanes, format & mode_flags" to structure
mipi_dsi_panel_plat.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>

Add missing BOOTENV_SF command in rk3399 config.

Fix it.

Fixes: f263b860acf8 ("rk3399: Enable SF distro bootcmd")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reported-by: Suniel Mahesh <sunil@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

- Fix fsl_esdhc_imx tunning mask
- Disable CMD CRC for normal tuning for fsl_esdhc_imx
- Retry CM1 until emmc ready
- Fix sdhci HISPD handling
- Cache-aligned extcsd reading

In current code, we add 1ms dealy after each tuning command for standard
tuning method. Adding this 1ms dealy is because USDHC default check the
CMD CRC and DATA line. If detect the CMD CRC, USDHC standard tuning
IC logic do not wait for the tuning data sending out by the card, trigger
the buffer read ready interrupt immediately, and step to next cycle. So
when next time the new tuning command send out by USDHC, card may still
not send out the tuning data of the upper command，then some eMMC cards
may stuck, can't response to any command, block the whole tuning procedure.

If do not check the CMD CRC for tuning, then do not has this issue. USDHC
will wait for the tuning data of each tuning command and check them. If the
tuning data pass the check, it also means the CMD line also okay for tuning.

So this patch disable the CMD CRC check for tuning, save some time for the
whole tuning procedure.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

According the RM, the bit[6~0] of register ESDHC_TUNING_CTRL is
TUNING_START_TAP, bit[7] of this register is to disable the command
CRC check for standard tuning. So fix it here.

Fixes: fa33d207494c ("mmc: split fsl_esdhc driver for i.MX")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

Avoid potential multiple definitions when CONFIG_ARM_PSCI_FW
is disabled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit 0528979fa7ab ("part: Drop disk_partition_t typedef") changed to
a struct. As a result it uncovered an apparent missing include in
zfs_common.h for part.h which actually contains the definition. The ZFS
handles the struct exclusively as pointers so it was only a warning.

    warning: ‘struct disk_partition’ declared inside parameter list
    will not be visible outside of this definition or declaration
 void zfs_set_blk_dev(struct blk_desc *rbdd, struct disk_partition *info);

Signed-off-by: Joel Johnson <mrjoel@lixil.net>

Series-CC: Simon Glass <sjg@chromium.org>

For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in
the .config file.

To avoid duplicate definitions move the setting from
include/configs/wandboard.h to configs/wandboard_defconfig.

Document the debug UART settings in the README.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

1. Drop legacy emmcboot wrapper from env.
2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP
3. Drop DFU defines

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>