u-boot.git/include, branch v2020.07-rc5 Unnamed repository; edit this file 'description' to name the repository. Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sh 2020-06-20T22:51:50+00:00 Tom Rini trini@konsulko.com 2020-06-20T22:51:50+00:00 f5a821459384a8fc1c8d0a44ce50f7f919257fa8 






ARM: rmobile: Increase PHY auto-negotiation timeout to 20s
2020-06-18T17:35:03+00:00

Marek Vasut
marek.vasut+renesas@gmail.com

2020-06-14T12:41:07+00:00

10fa7ec9f64dec9bc90e85e37248eabfb9b44bf2

The ethernet PHY on all known Gen3 boards takes a while to come out
of reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>





The ethernet PHY on all known Gen3 boards takes a while to come out
of reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>







colibri_imx6: fix video stdout in default environment
2020-06-18T17:17:28+00:00

Anatolij Gustschin
agust@denx.de

2020-05-26T08:50:17+00:00

1099b2abef35c3c887f6afac1a8ef18c7924d5d2

After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>





After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>







apalis_imx6: fix video stdout in default environment
2020-06-18T17:16:10+00:00

Anatolij Gustschin
agust@denx.de

2020-05-26T08:43:44+00:00

d8c37c63098ee6133739c94230dd4f283c481543

After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>





After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>







cm_fx6: fix video stdout in default environment
2020-06-18T17:14:36+00:00

Anatolij Gustschin
agust@denx.de

2020-05-26T08:52:00+00:00

f94e54811a74a2e0589bef6a11ebf488f86d1dd3

After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Nikita Kiryanov <nikita@compulab.co.il>





After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Nikita Kiryanov <nikita@compulab.co.il>







Merge tag 'efi-2020-07-rc5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
2020-06-15T20:44:58+00:00

Tom Rini
trini@konsulko.com

2020-06-15T20:44:58+00:00

c622afb0874e57cd7e9df51855e35286fa46aab7

Pull request for UEFI sub-system for efi-2020-07-rc5

Use correct printf code in efi_image_parse().
Add random number generation to HTML documentation.





Pull request for UEFI sub-system for efi-2020-07-rc5

Use correct printf code in efi_image_parse().
Add random number generation to HTML documentation.







mmc: fsl_esdhc: workaround for hardware 3.3v IO reliability issue
2020-06-15T01:45:22+00:00

Yangbo Lu
yangbo.lu@nxp.com

2020-05-19T03:06:44+00:00

c927d65873c7706f436ab59a78d44a0eb80fe939

When eSDHC operates at 3.3v, damage can accumulate in an internal
level shifter at a higher than expected rate. The faster the interface
runs, the more damage accumulates. This issue now is found on LX2160A
eSDHC1 for only SD card.

The hardware workaround is recommended to use an on-board level shifter
that is 1.8v on SoC side and 3.3v on SD card side.

For boards without hardware workaround, this option could be enabled,
ensuring 1.8v IO voltage and disabling eSDHC if no card.
This option assumes no hotplug, and u-boot has to make all the way to
to linux to use 1.8v UHS-I speed mode if has card.
If you do not want the workaround for better user experience, of course
you can choose to not select it running eSDHC in unsafe mode.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>





When eSDHC operates at 3.3v, damage can accumulate in an internal
level shifter at a higher than expected rate. The faster the interface
runs, the more damage accumulates. This issue now is found on LX2160A
eSDHC1 for only SD card.

The hardware workaround is recommended to use an on-board level shifter
that is 1.8v on SoC side and 3.3v on SD card side.

For boards without hardware workaround, this option could be enabled,
ensuring 1.8v IO voltage and disabling eSDHC if no card.
This option assumes no hotplug, and u-boot has to make all the way to
to linux to use 1.8v UHS-I speed mode if has card.
If you do not want the workaround for better user experience, of course
you can choose to not select it running eSDHC in unsafe mode.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>







doc: random number generation
2020-06-14T19:07:20+00:00

Heinrich Schuchardt
xypron.glpk@gmx.de

2020-06-13T10:29:52+00:00

c7ff87e0ae3e619b5718eafcdee433af0a46df8b

Add random number generation APIs to the HTML documentation.
Fix style issues.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>





Add random number generation APIs to the HTML documentation.
Fix style issues.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>







arm: Remove pcm051 board
2020-06-11T09:44:04+00:00

Jagan Teki
jagan@amarulasolutions.com

2020-06-01T13:19:45+00:00

64efd11d3b0fcb70008899920ed224916e1da9cc

OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Acked-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>





OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Acked-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>







arm: Remove omap3_pandora_defconfig board
2020-06-11T09:44:04+00:00

Jagan Teki
jagan@amarulasolutions.com

2020-06-01T13:17:52+00:00

a9c84ffa99471e3f48ab6a516eb5d02f5ea4a8f3

OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Acked-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>





OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Acked-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>