u-boot.git/include, branch v2021.07-rc5

Merge tag 'mmc-2021-6-22' of https://source.denx.de/u-boot/custodians/u-boot-mmc

2021-06-23T12:45:29+00:00

- Revert fsl_esdhc_imx using VENDORSPEC_FRC_SDCLK_ON
- Fix data read for dw_mmc
- Increase minimum bus freq for mtk-sd
- Minor cleanup

socfpga64: Do not define CONFIG_SYS_MEM_RESERVE_SECURE to 0

2021-06-23T12:45:03+00:00

Based on the comment in socfpga_soc64_common.h, the intention is for
CONFIG_SYS_MEM_RESERVE_SECURE to be unused.  However, in the code we do:
...

and that will evaluate to true.  This leads to unwanted code being
compiled.  Further, as CONFIG_SYS_MEM_RESERVE_SECURE has not been
migrated to Kconfig, this leads to a mismatch in the size of gd
depending on if we have or have not also had  also
included yet.

Remove the define as it's not needed.

Cc: Siew Chin Lim 
Cc: Chee Hong Ang 
Cc: Dalon Westergreen 
Signed-off-by: Tom Rini

malloc: add SPDX license identifiers

2021-06-23T12:45:03+00:00

The original code is in the public domain. Licenses/README states that the
general license for U-Boot is GPL 2.0+. So we can mark the malloc code as
GPL 2.0+ too.

Signed-off-by: Heinrich Schuchardt

Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"

2021-06-22T04:03:32+00:00

This reverts commit 63756575b42b8b4fb3f59cbbf0cedf03331bc2d2.

Since this commit a imx6qdl-pico board boots extremely slowly
in both SPL as well as U-Boot proper.

Fix this regression by reverting the offending commit for now.

Signed-off-by: Fabio Estevam 
Reviewed-by: Jaehoon Chung 
Tested-by: Pierre-Jean Texier

mmc: mmc-uclass: change to static about dm function

2021-06-22T04:03:20+00:00

Change to static about dm function.
They can be used with wrapper functions.

Signed-off-by: Jaehoon Chung

mmc: fsl_esdhc_imx: use mmc_send_cmd instead of dm_mmc_send_cmd

2021-06-22T04:03:11+00:00

Use mmc_send_cmd instead of dm_mmc_send_cmd.
It doesn't need to distinguish this function.

Signed-off-by: Jaehoon Chung

Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

2021-06-17T12:44:56+00:00

- fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release,
  mmc, usb, env, etc for Layerscape boards
- powerpc: Update Maintainers for some boards.

board: freescale: t208xrdb: add Linux fdt fix-ups for rev D

2021-06-17T06:16:11+00:00

The T2080RDB boards revisions D and up have updated 10G Aquantia PHYs
connected to MAC1 and MAC2. The second Aquantia PHY is located at a
different address on the MDIO bus compared to rev C (0x8 instead of 0x1).

Fix-up the Linux device tree to update the PHY address for the second
Aquantia PHY on boards revisions D and up. Also rename the PHY node to
reflect the changes.

Signed-off-by: Camelia Groza 
[Rebased]
Signed-off-by: Priyanka Jain

pg-wcom-ls102xa: fix sys counter frequency

2021-06-17T06:16:11+00:00

A system clock of 66MHz was chosen for the pg-wcom-ls102xa.
Compared to the Evalboard, this corresponds to a reduction of 1/3.
The system counter clock should have been reduced accordingly,
but that was not the case, so we had a system time that was
1/3 behind the real time.

This patch corrects the system counter clock to
8.333MHz = 66.667MHz / 8.

Signed-off-by: Rainer Boschung 
Signed-off-by: Aleksandar Gerasimovski 
Reviewed-by: Priyanka Jain

km: ls102x: update device disable configuration acc hw design desc

2021-06-17T06:16:11+00:00

In order to improve power consumption ls102x allows to disable peripherals
that are not in use.
This patch follows SELI8 HW design description and disables peripherals
that are not in use in our designs, the same configuration is applicable
and for EXPU1.

This patch uses available hwconfig option for updating ls102x device
disable configuration.

Signed-off-by: Aleksandar Gerasimovski 
Reviewed-by: Priyanka Jain