u-boot.git/include, branch v2021.10

mtd: nand: raw: convert nand_dt_init() to ofnode_xx() interface

2021-09-28T16:03:21+00:00

nand_dt_init() is still using fdtdec_xx() interface.
If OF_LIVE flag is enabled, dt property can't be get anymore.
Updating all fdtdec_xx() interface to ofnode_xx() to solve this issue.

For doing this, node parameter type must be ofnode.

First idea was to convert "node" parameter to ofnode type inside
nand_dt_init() using offset_to_ofnode(node). But offset_to_ofnode()
is not bijective, in case OF_LIVE flag is enabled, it performs an assert().

So, this leads to update nand_chip struct flash_node field from int to
ofnode and to update all nand_dt_init() callers.

Signed-off-by: Patrice Chotard

mtd: spi: nor: force mtd name to "nor%d"

2021-09-28T16:03:20+00:00

Force the mtd name of spi-nor to "nor" + the driver sequence number:
"nor0", "nor1"... beginning after the existing nor devices.

This patch is coherent with existing "nand" and "spi-nand"
mtd device names.

When CFI MTD NOR device are supported, the spi-nor index is chosen after
the last CFI device defined by CONFIG_SYS_MAX_FLASH_BANKS.

When CONFIG_SYS_MAX_FLASH_BANKS_DETECT is activated, this config
is replaced by to cfi_flash_num_flash_banks in the include file
mtd/cfi_flash.h.

This generic name "nor%d" can be use to identify the mtd spi-nor device
without knowing the real device name or the DT path of the device,
used with API get_mtd_device_nm() and is used in mtdparts command.

This patch also avoids issue when the same NOR device is present 2 times,
for example on STM32MP15F-EV1:

STM32MP> mtd list
SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, \
total 64 MiB

List of MTD devices:
* nand0
  - type: NAND flash
  - block size: 0x40000 bytes
  - min I/O: 0x1000 bytes
  - OOB size: 224 bytes
  - OOB available: 118 bytes
  - ECC strength: 8 bits
  - ECC step size: 512 bytes
  - bitflip threshold: 6 bits
  - 0x000000000000-0x000040000000 : "nand0"
* mx66l51235l
  - device: mx66l51235l@0
  - parent: spi@58003000
  - driver: jedec_spi_nor
  - path: /soc/spi@58003000/mx66l51235l@0
  - type: NOR flash
  - block size: 0x10000 bytes
  - min I/O: 0x1 bytes
  - 0x000000000000-0x000004000000 : "mx66l51235l"
* mx66l51235l
  - device: mx66l51235l@1
  - parent: spi@58003000
  - driver: jedec_spi_nor
  - path: /soc/spi@58003000/mx66l51235l@1
  - type: NOR flash
  - block size: 0x10000 bytes
  - min I/O: 0x1 bytes
  - 0x000000000000-0x000004000000 : "mx66l51235l"

The same mtd name "mx66l51235l" identify the 2 instances
mx66l51235l@0 and mx66l51235l@1.

This patch fixes a ST32CubeProgrammer / stm32prog command issue
with nor0 target on STM32MP157C-EV1 board introduced by
commit b7f060565e31 ("mtd: spi-nor: allow registering multiple MTDs when
DM is enabled").

Fixes: b7f060565e31 ("mtd: spi-nor: allow registering multiple MTDs when DM is enabled")
Signed-off-by: Patrick Delaunay 
[trini: Add  to  for DM_MAX_SEQ_STR]
Signed-off-by: Tom Rini

mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported

2021-09-28T12:35:19+00:00

When CONFIG_SYS_MAX_FLASH_BANKS_DETECT is activated,
CONFIG_SYS_MAX_FLASH_BANKS is replaced by cfi_flash_num_flash_banks,
but this variable is defined in drivers/mtd/cfi_flash.c, which is
compiled only when CONFIG_FLASH_CFI_DRIVER is activated, in U-Boot
or in SPL when CONFIG_SPL_MTD_SUPPORT is activated.

This patch deactivates this feature CONFIG_SYS_MAX_FLASH_BANKS_DETECT
when flash cfi driver is not activated to avoid compilation issue in
the next patch, when CONFIG_SYS_MAX_FLASH_BANKS is used in spi_nor_scan().

Signed-off-by: Patrick Delaunay

efi_loader: Fix spec ID event creation

2021-09-25T10:31:08+00:00

TCG EFI Protocol Specification defines the number_of_algorithms
field in spec ID event to be equal to the number of active
algorithms supported by the TPM device. In current implementation,
this field is populated with the count of all algorithms supported
by the TPM which leads to incorrect spec ID event creation.

Similarly, the algorithm array in spec ID event should be a variable
length array with length being equal to the number_of_algorithms field.
In current implementation this is defined as a fixed length array
which has been fixed.

Signed-off-by: Ruchika Gupta 
CC: Masahisa Kojima 
CC: Ilias Apalodimas 
CC: Heinrich Schuchardt 
Reviewed-by: Ilias Apalodimas

mtd: remove SPEAr flash driver st_smi

2021-09-24T16:09:47+00:00

Remove the driver st_smic.c used in SPEAr products and the associated
config CONFIG_ST_SMI; this driver is no more used in U-Boot after the
commit 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr
support").

Fixes: 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support")
Signed-off-by: Patrick Delaunay 
Reviewed-by: Stefan Roese 
Reviewed-by: Tom Rini

Merge git://source.denx.de/u-boot-socfpga

2021-09-23T12:30:45+00:00

Bugfixes for this one socfpga platform

arm: socfpga: vining: Drop meaningless comment

2021-09-22T19:30:39+00:00

The comment is no longer meaningful due to DT conversion, drop it.

Signed-off-by: Marek Vasut 
Cc: Siew Chin Lim 
Cc: Simon Goldschmidt 
Cc: Tien Fong Chee

usb: ehci-mx6: use phy_type from device tree

2021-09-22T19:29:56+00:00

Allow using different PHY interfaces for multiple USB controllers. When no
value is set in DT, we fall back to CONFIG_MXC_USB_PORTSC for now to stay
compatible with current board configurations.

This also adds support for the HSIC mode of the i.MX7.

Signed-off-by: Markus Niebel 
Signed-off-by: Matthias Schiffer

usb: ehci-ci: remove redundant PORTSC flag definitions

2021-09-22T19:29:56+00:00

These definitions are unused, all boards that define portsc flags use
the equivalent PORT_* definitions instead.

Signed-off-by: Markus Niebel 
Signed-off-by: Matthias Schiffer

include/configs: replace MXC_EHCI_MODE_SERIAL with PORT_PTS_SERIAL

2021-09-22T19:29:56+00:00

The MXC_EHCI_MODE_ definitions are redundant. Replace MXC_EHCI_MODE_SERIAL
with the equivalent PORT_PTS_SERIAL.

Only the zmx25 platform is affected.

Signed-off-by: Markus Niebel 
Signed-off-by: Matthias Schiffer