- Only call binman when TPL available;
- rk3128 DTS fix;
- Fix GPT table corruption for rk3399 puma ;
- Fix i2c for rk3399 Pinebookpro;
- Enable UEFI capsule update for RockPi4;

Add information that will be needed for enabling the UEFI capsule
update feature on the RockPi4 boards. With the feature enabled, it
would be possible to update the idbloader and u-boot.itb images on the
RockPi4B and RockPi4C variants.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

In order to update the DT for rk3128
sync the clock dt-binding header.
This is the state as of v6.0 in Linux.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Pull request for efi-2023-01-rc4

Documentation:

* Fix htmldoc build dependency

UEFI:

* Adjust EBBR version for compatibility table

The EFI Conformance Profile Table entry for EBBR appears in v2.1.0 of the
EBBR specification[1]. Update naming accordingly.

While at it, update the EBBR version referenced in the documentation.

[1]: https://github.com/ARM-software/ebbr/releases/tag/v2.1.0

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

There is a CONFIG_MMC_SUNXI_SLOT definition in our sunxi_common.h config
header, which was used to note the first MMC controller to initialise.
The definition in that header was always set to 0, with no easy way of
overriding this, and certainly none of the existing boards made any use
of that (non-)feature.
Remove that definition and replace it with a constant 0 in the only
user, in board.c. It turns out that this is safe, as this is only used
in the SPL, and the BROM also unconditionally initialises MMC0.
This also removes the last legacy config symbol with SUN*I in it from
the whitelist.

Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

This function is only used within this module, so it is no longer
necessary to use EXPORT_SYMBOL_GPL().

This patch parallels the work done in the following patch:
https://lore.kernel.org/linux-mtd/20221018170205.1733958-1-dario.binacchi@amarulasolutions.com

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221108090719.3631621-1-dario.binacchi@amarulasolutions.com

- Drop MMCI interrupt-names in STM32H743, STM32MP15 and STM322MP13 DT

DHSOM:
  - Enable assorted ST specific commands
  - Add version variable
  - Add boot counter
STM32MP13:
  - Add sdmmc cd-gpios for STM32MP135F-DK
  - Add clock & reset support
STM32 ADC:
  - Split channel init into several routines
  - Add support of generic channels binding

- DFU and RNDIS fixes

Define stub for dfu_*_virt function in SPL, because
CONFIG_SPL_DFU_VIRT is not defined.

This patch avoids compilation issue in dfu_fill_entity() when
CONFIG_SPL_DFU is activated because the dfu_fill_entity_virt()
function is not available.

Fixes: ec44cace4b8d2 ("dfu: add DFU virtual backend")
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>