This series brings our zlib code more up to date. However, it drops an
important performance improvement that is required on some of our
supported platforms in order to boot Linux before the watchdog resets
the system. Furthermore, the "post increment" version of this
performance loop was not tested, so while we can fix it, it would then
require re-testing all platforms. At this point in time, we will revert
updating zlib (which has had a potential security issue since 2016) and
fix this in the v2024.10 release.

This reverts commit 4914263c9a14315390d3ccc4816cf3a94cfd156d, reversing
changes made to ef8ef5f77c9a998f76a48277a883af1645b54117.

Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Tom Rini <trini@konsulko.com>

Fix some trivial typos found by browsing the code.
Done with flyspell.

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Guillaume La Roque<glaroque@baylibre.com>
Reviewed-by: Julien Masson <jmasson@baylibre.com>

Use upstream device tree files and bindings. To do so:
 - imply (enable) OF_UPSTREAM option for E850-96 target
 - point DEFAULT_DEVICE_TREE in E850-96 config to upstream dts
 - remove now not needed local dts files, binding docs and headers
 - update MAINTAINERS and board/samsung/e850-96/MAINTAINERS
   correspondingly

Upstream device tree files for Exynos850 SoC and E850-96 board are
pretty much the same as local (removed) ones, so the conversion is
rather straightforward and painless in this case. The appended dts file
(arch/arm/dts/exynos850-e850-96-u-boot.dtsi) stays unchanged.

The only remaining local dt-bindings doc for E850-96 board is
exynos-pmu.yaml. It wasn't removed as it's quite different from Linux
kernel version. Particularly U-Boot local version of exynos-pmu.yaml
describes "samsung,uart-debug-1" property, which is not present in Linux
kernel binding. Later it might be upstreamed to Linux kernel, and once
it's done the U-Boot exynos-pmu.yaml binding can be removed.

No functional change.

Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

TPM fixes

replace tpm2_supported_algorithms with an array of structures
relating algorithm names, to TCG id's, digest length and mask values.

While at it fix the tpm2_algorithm_to_mask to return the proper value.

Cc: Eddie James <eajames@linux.ibm.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Fixes: 97707f12fdab ("tpm: Support boot measurements")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

The Indiedroid Nova is a Rockchip RK3588S based SBC from Indiedroid.

Specifications:

    Rockchip RK3588S SoC
    4x ARM Cortex-A76, 4x ARM Cortex-A55
    4/8/16GB memory LPDDR4x
    Mali G610MC4 GPU
    Optional eMMC
    2x USB 2.0, 2x USB 3.0, 1x USB 3.0 C port with DP Alt
    1x MIPI-CSI Port (4-lane or 2x 2-lane)
    1x MIPI-DSI 4-lane connector
    1x Micro HDMI 2.1 output, 1x DP 1.4 output
    Gigabit Ethernet
    Realtek RTL8821CS WiFi
    4 pin debug UART connector
    40 pin GPIO header
    Size: 85mm x 56mm (Raspberry Pi Form Factor)

Kernel commit:
3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

The Powkiddy X55 is a Rockchip RK3566 based handheld gaming device.
UART, ADC, eMMC, and SDMMC are tested to work in U-Boot and this
successfully boots mainline Linux.

Kernel commit:
e99adc97e21a ("arm64: dts: rockchip: Add Powkiddy X55")

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Migrate RV1126 boards that exists in Linux v6.8 to use OF_UPSTREAM.

Following targets is migrated to use OF_UPSTREAM:

- rv1126-edgeble-neu2 : Board is an industrial form factor
                        IO board.
- sonoff-ihost-rv1126 : Gateway device designed to provide a
                        Smart Home Hub.

Cc: Tim Lunn <tim@feathertop.org>
Cc: Jagan Teki <jagan@edgeble.ai>
Reviewed-By: Tim Lunn <tim@feathertop.org>
Tested-By: Tim Lunn <tim@feathertop.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>

After the conversion of RV1108 to OF_UPSTREAM,
include/dt-bindings/clock/rv1108-cru.h is no longer needed because
there is dts/upstream/include/dt-bindings/clock/rv1108-cru.h from
upstream Linux.

Remove the unneeded rv1108-cru.h file.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>