u-boot.git/lib/Makefile, branch v2018.11

tpm: Add support for SPL and TPL

2018-10-09T10:40:27+00:00

At present the tpm can only be used in U-Boot proper. Updated it to work
in SPL and TPL also.

Signed-off-by: Simon Glass

test: unit tests for Unicode functions

2018-09-23T19:55:29+00:00

Provide unit tests for Unicode functions.

Signed-off-by: Heinrich Schuchardt 
Signed-off-by: Alexander Graf

lib: build charset.o only if needed

2018-09-23T19:55:29+00:00

charset.o is only needed for the EFI subsystem

Signed-off-by: Heinrich Schuchardt 
Signed-off-by: Alexander Graf

avb2.0: integrate avb 2.0 into the build system

2018-06-18T17:55:13+00:00

Integrate libavb into the build system. Introduce CONFIG_LIBAVB
build option.

Signed-off-by: Igor Opaniuk

lib: Add hexdump

2018-06-13T11:49:12+00:00

Often during debugging session it's very interesting to see
what data we were dealing with. For example what we write or read
to/from memory or peripherals.

This change introduces functions that allow to dump binary
data with one simple function invocation like:
------------------->8----------------
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
------------------->8----------------

which gives us the following:
------------------->8----------------
00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35  ....baudrate=115
00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e  200.bootargs=con
00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30  sole=ttyS3,11520
00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00  0n8.bootdelay=3.
00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00  bootfile=uImage.
00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39  fdtcontroladdr=9
00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72  ffb1ba0.loadaddr
00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65  =0x82000000.stde
00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32  rr=serial0@e0022
00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c  000.stdin=serial
000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75  0@e0022000.stdou
000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30  t=serial0@e00220
000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00  00..............
...
------------------->8----------------

Source of hexdump.c was copied from Linux kernel v4.7-rc2.

Signed-off-by: Alexey Brodkin 
Cc: Anatolij Gustschin 
Cc: Mario Six 
Cc: Simon Glass 
Cc: Tom Rini 
Cc: Stefan Roese

mmc: Separate "mmc swrite" from fastboot

2018-05-30T09:59:21+00:00

Introduce CONFIG_IMAGE_SPARSE and CONFIG_CMD_MMC_SWRITE so the "mmc
swrite" command is separated from the fastboot code.

Move image-sparse from common to lib so it's clear it's library code.

Rename CONFIG_FASTBOOT_FLASH_FILLBUF_SIZE to CONFIG_IMAGE_SPARSE_FILLBUF_SIZE
and migrate it to Kconfig.

Signed-off-by: Alex Kiernan 
Acked-by: Jassi Brar 
Reviewed-by: Simon Glass

tpm: prepare support for TPMv2.x commands

2018-05-26T00:12:55+00:00

Choice between v1 and v2 compliant functions is done with the
configuration.

Create the various files that will receive TPMv2-only code on the same
scheme as for the TPMv1 code.

Signed-off-by: Miquel Raynal 
Reviewed-by: Simon Glass 
Reviewed-by: Tom Rini

tpm: disociate TPMv1.x specific and generic code

2018-05-26T00:12:55+00:00

There are no changes in this commit but a new organization of the code
as follow.

* cmd/ directory:
        > move existing code from cmd/tpm.c in cmd/tpm-common.c
	> move specific code in cmd/tpm-v1.c
	> create a specific header file with generic definitions for
	  commands only called cmd/tpm-user-utils.h

* lib/ directory:
        > move existing code from lib/tpm.c in lib/tpm-common.c
	> move specific code in lib/tpm-v1.c
	> create a specific header file with generic definitions for
	  the library itself called lib/tpm-utils.h

* include/ directory:
        > move existing code from include/tpm.h in include/tpm-common.h
	> move specific code in include/tpm-v1.h

Code designated as 'common' is compiled if TPM are used. Code designated
as 'specific' is compiled only if the right specification has been
selected.

All files include tpm-common.h.
Files in cmd/ include tpm-user-utils.h.
Files in lib/ include tpm-utils.h.
Depending on the specification, files may include either (not both)
tpm-v1.h or tpm-v2.h.

Signed-off-by: Miquel Raynal 
Reviewed-by: Tom Rini 
[trini: Fix a few more cases of tpm.h -> tpm-v1.h, some Kconfig logic]
Signed-off-by: Tom Rini

tpm: prepare introduction of TPMv2.x support in Kconfig

2018-05-26T00:12:33+00:00

Because both major revisions are not compatible at all, let's make them
mutually exclusive in Kconfig. This way we will be sure, when using a
command or a library function that it is supported by the right
revision.

Current drivers are currently prefixed by "tpm_", we will prefix TPMv2.x
files by "tpm2_" to make the distinction without moving everything.

The Kconfig menu about TPM drivers is now divided into two sections, one
for each specification. Compliant drivers with one specification will
only show up if this specification _only_ has been selected, otherwise a
comment is displayed.

Once a driver is selected by the user, it selects automatically a
boolean value, that is needed in order to activate the TPM commands.
Selecting the TPM commands will automatically select the right
command/library files.

Signed-off-by: Miquel Raynal 
Reviewed-by: Simon Glass 
Reviewed-by: Tom Rini 
[trini: Rework deps as TPM_V1 and TPM_V2 depend on TPM,
        drop TPM_DRIVER_SELECTED]
Signed-off-by: Tom Rini

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini