u-boot.git/lib/hashtable.c, branch v2012.10

OMAP: networking support for SPL

2012-10-01T17:02:14+00:00

This patch adds support for networking in SPL. Some devices are
capable of loading SPL via network so it makes sense to load the
main U-Boot binary via network too. This patch tries to use
existing network code as much as possible. Unfortunately, it depends
on environment which in turn depends on other code so SPL size
is increased significantly. No effort was done to decouple network
code and environment so far.

Signed-off-by: Ilya Yanok 
Acked-by: Joe Hershberger 
Signed-off-by: Tom Rini

env: delete selected vars not present in imported env

2012-09-18T19:01:52+00:00

When variables explicitly specified on the command line are not present
in the imported env, delete them from the running env.
If the variable is also missing from the running env, issue a warning.

Signed-off-by: Gerlando Falauto 
Reviewed-by: Marek Vasut

env: check and apply changes on delete/destroy

2012-09-18T19:01:52+00:00

Signed-off-by: Gerlando Falauto 
Reviewed-by: Marek Vasut

env: add check/apply logic to himport_r()

2012-09-18T19:01:52+00:00

Change hashtable so that a callback function will decide whether a
variable can be overwritten, and possibly apply the changes.

So add a new field to struct hsearch_data:

 o "apply" callback function to check whether a variable can be
    overwritten, and possibly immediately apply the changes;
    when NULL, no check is performed.

And a new argument to himport_r():
 o "do_apply": whether to call the apply callback function

NOTE: This patch does not change the current behavior.

Signed-off-by: Gerlando Falauto 
Reviewed-by: Marek Vasut

env: make himport_r() selective on variables

2012-09-18T19:01:52+00:00

Add 2 new arguments to himport_r():

 o "nvars", "vars": number and list of variables to take into account
   (0 means ALL)

NOTE: This patch does not change the current behaviour.

Signed-off-by: Gerlando Falauto 
Reviewed-by: Marek Vasut

sandbox: Fix warnings in hashtable.c

2011-11-22T07:40:05+00:00

This fixes a few printf() strings for size_t which are missing the 'z'
modifier.

Signed-off-by: Simon Glass 
Acked-by: Mike Frysinger

env: allow to export only selected variables

2011-11-08T12:20:42+00:00

New syntax:
	env export [-t | -b | -c] [-s size] addr [var ...]

With this change it is possible to provide a list of variables names
that shall be exported.  Whenno arguments are given, the whole
environment gets exported.

NOTE: The new handling of the "size" argument means a change to the
user API.

Signed-off-by: Wolfgang Denk

Replace space and tab checks with isblank

2011-10-17T20:25:34+00:00

These are various places I found that checked for conditions equivalent
to isblank.

Signed-off-by: Jason Hobbs

Constify getenv(), setenv() and hash code functions

2011-07-29T23:37:44+00:00

This is needed to get rid of build warnings like

main.c:311: warning: passing argument 2 of 'setenv' discards qualifiers from pointer target type

which result from commit 09c2e90 "unify version_string".

Signed-off-by: Wolfgang Denk 
Cc: Andreas Bie�mann

common: add a grepenv command

2011-04-27T23:00:07+00:00

u-boot environments, esp. when boards are shared across multiple
users, can get pretty large and time consuming to visually parse.
The grepenv command this patch adds can be used in lieu of printenv
to facilitate searching.  grepenv works like printenv but limits
its output only to environment strings (variable name and value
pairs) that match the user specified substring.

the following examples are on a board with a 5313 byte environment
that spans multiple screen pages:

Example 1:  summarize ethernet configuration:

=> grepenv eth TSEC
etact=FM1@DTSEC2
eth=FM1@DTSEC4
ethact=FM1@DTSEC2
eth1addr=00:E0:0C:00:8b:01
eth2addr=00:E0:0C:00:8b:02
eth3addr=00:E0:0C:00:8b:03
eth4addr=00:E0:0C:00:8b:04
eth5addr=00:E0:0C:00:8b:05
eth6addr=00:E0:0C:00:8b:06
eth7addr=00:E0:0C:00:8b:07
eth8addr=00:E0:0C:00:8b:08
eth9addr=00:E0:0C:00:8b:09
ethaddr=00:E0:0C:00:8b:00
netdev=eth0
uprcw=setenv ethact $eth;setenv filename p4080ds/R_PPSXX_0xe/rcw_0xe_2sgmii_rev2_high.bin;setenv start 0xe8000000;protect off all;run upimage;protect on all
upuboot=setenv ethact $eth;setenv filename u-boot.bin;setenv start eff80000;protect off all;run upimage;protect on all
upucode=setenv ethact $eth;setenv filename fsl_fman_ucode_P4080_101_6.bin;setenv start 0xef000000;protect off all;run upimage;protect on all
usdboot=setenv ethact $eth;tftp 1000000 $dir/$bootfile;tftp 2000000 $dir/initramfs.cpio.gz.uboot;tftp c00000 $dir/p4080ds-usdpaa.dtb;setenv bootargs root=/dev/ram rw console=ttyS0,115200 $othbootargs;bootm 1000000 2000000 c00000;
=>

Example 2: detect unused env vars:

=> grepenv etact
etact=FM1@DTSEC2
=>

Example 3: reveal hardcoded variables; e.g., for fdtaddr:

=> grepenv fdtaddr
fdtaddr=c00000
nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr
ramboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr
=> grep $fdtaddr
fdtaddr=c00000
my_boot=bootm 0x40000000 0x41000000 0x00c00000
my_dtb=tftp 0x00c00000 $prefix/p4080ds.dtb
nohvboot=tftp 1000000 $dir/$bootfile;tftp 2000000 $dir/$ramdiskfile;tftp c00000 $dir/$fdtfile;setenv bootargs root=/dev/ram rw ramdisk_size=0x10000000 console=ttyS0,115200;bootm 1000000 2000000 c00000;
=>

This patch also enables the grepenv command by default on
corenet_ds based boards (and repositions the DHCP command
entry to keep the list sorted).

Signed-off-by: Kim Phillips 
Cc: Kumar Gala 
Cc: Andy Fleming