As exposed by "make randconfig", we have an issue with the dependencies
for BOOTM_OPTEE. This symbol needs to select BOOTM_LINUX and in turn
depend on the library symbols that have to be enabled for BOOTM_LINUX to
be valid (LIB_BOOTI, LIB_BOOTM and LIB_BOOTZ).

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

I've spent time trying to figure out why my board (Rockchip PX30-based)
suddenly boot loops when running a specific program in Linux userspace
after working on a U-Boot upgrade. I actually inadvertently had the TEE
environment variable set for a device which doesn't actually need to run
any TEE OS (so had OPTEE_LIB disabled).

It is currently possible to build an image with an OP-TEE OS (via the
TEE environment variable) without OPTEE_LIB. U-Boot will happily load
the TEE OS and the next OS (e.g. the Linux kernel).

This is an issue because on FDT-enabled devices, OP-TEE OS adds nodes to
the reserved-memory FDT node for the memory regions it just reserved for
itself. This updated FDT is then passed to U-Boot proper which should
know better not to use memory from there. The actual issue is that
without OPTEE_LIB and OF_LIBFDT enabled, U-Boot proper will not copy
those nodes over to the next OS's FDT before starting it. This results
in the next OS's (e.g. Linux kernel) to not be aware of reserved memory,
incurring random crashes or device reboots when it tries to access
secure reserved memory area.

On Rockchip, the U-Boot FIT image which contains both the TEE OS and
U-Boot proper is generated by binman. Unfortunately, binman doesn't seem
to have access to Kconfig symbols (grep CONFIG_ doesn't return anything
meaningful and binman is either configured through FDT nodes or via CLI
arguments, c.f. cmd_binman in the root Makefile) so we cannot try to be
smart and guide the user to the correct Kconfig option to select if TEE
is set. We could add a property based on the presence of OPTEE_LIB in
rockchip-u-boot.dtsi for example and have a custom message based on
that, the issue is that I assume all FDT-based platforms do actually
need to do this dance, and not only Rockchip.

Another option could be to add a CLI argument to binman through which
we would pass the state of OPTEE_LIB and error out the build in that
case, but that feels like opening the door to other various dirty hacks.

Another option is to propagate the TEE environment variable to the
preprocessor of the FDT (via dtc_cpp_flags) and then we can do

  #if defined(TEE) && !IS_ENABLED(CONFIG_OPTEE_LIB)
  #error "CONFIG_OPTEE_LIB must be enabled!"
  #endif

but we have the same issue as above, it is then Rockchip-specific and
doesn't feel right to me.

Yet another option is to remove the @tee-SEQ node from the binman FIT
description when OPTEE_LIB isn't set but then we would lose the
following nice message when no TEE is provided:

Image 'simple-bin' is missing optional external blobs but is still functional: tee-os

and even worse, build without any TEE OS even though we could provide
one via the TEE environment variable.

Finally, another option could be to move this hack under
arch/arm/mach-rockchip/Kconfig to make it Rockchip-specific or add a
depends on ARCH_ROCKCHIP. However OP-TEE OS on Aarch32 Rockchip boards
doesn't actually need any of that if SPL_OPTEE_IMAGE is set because
arch/arm/mach-rockchip/sdram.c then marks some hardcoded memory regions
in RAM as holes in DRAM, which has the same effect as reserved memory
regions I guess. I assume other platforms may use something different,
so it may be casting too wide of a net.

This commit is what I could come up with as a stopgap measure to avoid
building images that simply cannot reliably work and fail randomly.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>

This reverts commit c5b68ef8af3c2f515c1f5b8d63a69359a85d753b.

CONFIG_OPTEE_TZDRAM_SIZE is used by imx6-based SoCs as well. Move the
option back.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>

This config is only used by three boards with this SOC. Most other
platforms derive this information from devicetree, and are unlikely
to ever need this config.

Moreover, it is confusing when Kconfig asks for this value under
"Support OPTEE images", but does not do anything with the value.
Move it to imx7 for those boards who still make use of it.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>

This value is not used by u-boot, and it should not. The load address
of an OPTEE image is defined by said image. Either a uImage or a FIT
will have a defined load address and entry point. Those values are the
correct ones, not CONFIG_OPTEE_LOAD_ADDR.

Commit f25006b96e9f ("optee: Add CONFIG_OPTEE_LOAD_ADDR") justifies
this config by requiring its presence in u-boot's .config for other
images as part of a larger build, claiming it is "the best way".

This argument is not persuasive. U-boot's configuration is driven by
platform requirements, not the other way around. It seems more likely
that the argument is conflating tooling issues with Kconfig. Yocto and
buildroot have excellent mechanisms for defining values across the
board (pun intended). u-boot's Kconfig is the wrong place to do it.

Furthermore, it is not "best" for u-boot because it hardcodes a value
which is then not used. In fact the load address that u-boot uses is
the one derived from the OPTEE image.

Confused yet? I sure was. To prevent future confusion, remove
CONFIG_OPTEE_LOAD_ADDR.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>

It is no longer used in u-boot. Information about the TZDRAM location
is usually available in the devicetree as "/reserved-memory/" nodes.
Because this isn't used, remove it.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>

The configuration CONFIG_OPTEE is defined 2 times:
1- in lib/optee/Kconfig for support of OPTEE images loaded by bootm command
2- in drivers/tee/optee/Kconfig for support of OP-TEE driver.

It is abnormal to have the same CONFIG define for 2 purpose;
and it is difficult to managed correctly their dependencies.

Moreover CONFIG_SPL_OPTEE is defined in common/spl/Kconfig
to manage OPTEE image load in SPL.

This definition causes an issue with the macro CONFIG_IS_ENABLED(OPTEE)
to test the availability of the OP-TEE driver.

This patch cleans the configuration dependency with:
- CONFIG_OPTEE_IMAGE (renamed) => support of OP-TEE image in U-Boot
- CONFIG_SPL_OPTEE_IMAGE (renamed) => support of OP-TEE image in SPL
- CONFIG_OPTEE (same) => support of OP-TEE driver in U-Boot
- CONFIG_OPTEE_LIB (new) => support of OP-TEE library

After this patch, the macro have the correct behavior:
- CONFIG_IS_ENABLED(OPTEE_IMAGE) => Load of OP-TEE image is supported
- CONFIG_IS_ENABLED(OPTEE) => OP-TEE driver is supported

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>

Commit c7b3a7ee5351 ("optee: adjust dependencies and default values for
dram") makes the TZDRAM defines for OPTEE show up for all configs as a
side-effect. While not harmful its not what we really want.

This patch makes the following defines contingent on CONFIG_OPTEE=y

CONFIG_OPTEE_TZDRAM_BASE
CONFIG_OPTEE_TZDRAM_SIZE

Rightly, if you don't have CONFIG_OPTEE=y you don't care about the above
two defines.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Rui Miguel Silva <rui.silva@linaro.org>
Acked-by: Rui Miguel Silva <rui.silva@linaro.org>

We may have, the not yet considered, scenario where OPTEE is loaded before
u-boot and *not* by u-boot, e.g, the boot flow using the ARM Trusted
Firmware (ATF), where in the 32bit flow is:
BootRom->ATF(BL2)->Optee(BL32)->u-boot(BL33)

In this case we need still to reserve the memory used by optee, to avoid
for example to realocate ourself to the same address at the end of DRAM.
So, we change here the dependencies on the OPTEE lib and we set the default
size and base of TZRAM to zero.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: u-boot@lists.denx.de