u-boot.git/lib/optee, branch v2020.10

optee: fix copy of optee reserved-memory node

2020-06-15T15:23:40+00:00

Fix the loop that parses FDT for a reserved memory node named "optee".

Before this change, if at least one subnode was found in the
reserved-memory node, the function endlessly looped since instruction
continue returned back in the loop without updating variable subnode.
This change fixes the issue by using a for loop.

Fixes: 6ccb05eae01b ("image: fdt: copy possible optee nodes to a loaded devicetree")
Signed-off-by: Etienne Carriere 
Signed-off-by: Patrick Delaunay

common: Drop log.h from common header

2020-05-19T01:19:18+00:00

Move this header out of the common header.

Signed-off-by: Simon Glass

optee: Replace uninitialized return variable by proper one.

2020-01-30T18:30:35+00:00

As hinted by GCC 9, there is a return statement that returns
an uninitialized variable in optee_copy_firmware_node().
This patch addresses this.

Signed-off-by: Christoph Müllner 
Reviewed-by: Heiko Stuebner

common: Move the image globals into image.h

2020-01-17T19:02:35+00:00

These three globals relate to image handling. Move them to the image
header file.

Signed-off-by: Simon Glass

image: fdt: copy possible optee nodes to a loaded devicetree

2019-11-14T13:09:34+00:00

The loading convention for optee or any other tee on arm64 is as bl32
parameter to the trusted-firmware. So TF-A gets invoked with the TEE as
bl32 and main u-boot as bl33. Once it has done its startup TF-A jumps
into the bl32 for the TEE startup, returns to TF-A and then jumps to bl33.

All of them get passed a devicetree as parameter and all components often
get loaded from a FIT image.

OP-TEE will create additional nodes in that devicetree namely a firmware
node and possibly multiple reserved-memory nodes.

While this devicetree is used in main u-boot, in most cases it won't be
the one passed to the actual kernel. Instead most boot commands will load
a new devicetree from somewhere like mass storage of the network, so if
that happens u-boot should transfer the optee nodes to that new devicetree.

To make that happen introduce optee_copy_fdt_nodes() called from the dt
setup function in image-fdt which after checking for the optee presence
in the u-boot dt will make sure a optee node is present in the kernel dt
and transfer any reserved-memory regions it can find.

Signed-off-by: Heiko Stuebner 
Reviewed-by: Jens Wiklander

optee: Make TZDRAM config options contingent on CONFIG_OPTEE

2019-07-19T13:12:07+00:00

Commit c7b3a7ee5351 ("optee: adjust dependencies and default values for
dram") makes the TZDRAM defines for OPTEE show up for all configs as a
side-effect. While not harmful its not what we really want.

This patch makes the following defines contingent on CONFIG_OPTEE=y

CONFIG_OPTEE_TZDRAM_BASE
CONFIG_OPTEE_TZDRAM_SIZE

Rightly, if you don't have CONFIG_OPTEE=y you don't care about the above
two defines.

Signed-off-by: Bryan O'Donoghue 
Cc: Rui Miguel Silva 
Acked-by: Rui Miguel Silva

optee: adjust dependencies and default values for dram

2018-10-22T12:37:28+00:00

We may have, the not yet considered, scenario where OPTEE is loaded before
u-boot and *not* by u-boot, e.g, the boot flow using the ARM Trusted
Firmware (ATF), where in the 32bit flow is:
BootRom->ATF(BL2)->Optee(BL32)->u-boot(BL33)

In this case we need still to reserve the memory used by optee, to avoid
for example to realocate ourself to the same address at the end of DRAM.
So, we change here the dependencies on the OPTEE lib and we set the default
size and base of TZRAM to zero.

Signed-off-by: Rui Miguel Silva 
Signed-off-by: Bryan O'Donoghue 
Cc: Fabio Estevam 
Cc: Ryan Harkin 
Cc: u-boot@lists.denx.de

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

bootm: optee: Add a bootm command for type IH_OS_TEE

2018-03-19T20:14:25+00:00

This patch makes it possible to verify the contents and location of an
OPTEE image in DRAM prior to handing off control to that image. If image
verification fails we won't try to boot any further.

Signed-off-by: Bryan O'Donoghue 
Suggested-by: Andrew F. Davis 
Cc: Harinarayan Bhatta 
Cc: Andrew F. Davis 
Cc: Tom Rini 
Cc: Kever Yang 
Cc: Philipp Tomsich 
Cc: Peng Fan

optee: Add error printout

2018-03-19T20:14:25+00:00

When encountering an error in OPTEE verification print out various details
of the OPTEE header to aid in further debugging of encountered errors.

Signed-off-by: Bryan O'Donoghue 
Cc: Harinarayan Bhatta 
Cc: Andrew F. Davis 
Cc: Tom Rini 
Cc: Kever Yang 
Cc: Philipp Tomsich 
Cc: Peng Fan 
Tested-by: Peng Fan