u-boot.git/lib, branch v2014.04-rc3

lib: rand: introduce new configs: CONFIG_LIB_RAND and CONFIG_LIB_HW_RAND

2014-03-28T19:06:31+00:00

New configs:
- CONFIG_LIB_RAND    - to enable implementation of rand library in lib/rand.c
- CONFIG_LIB_HW_RAND - to enable hardware based implementations of lib rand

Other changes:
- add CONFIG_LIB_RAND to boards configs which needs rand()
- put only one rand.o dependency in lib/Makefile

CONFIG_LIB_HW_RAND should be defined for drivers which implements rand library
(declared in include/common.h):
- void srand(unsigned int seed)
- unsigned int rand(void)
- unsigned int rand_r(unsigned int *seedp)

Signed-off-by: Przemyslaw Marczak 
Cc: Michael Walle 
Cc: Tom Rini 
Cc: Masahiro Yamada

Logo: TIZEN: Change booting logo size to official size.

2014-03-28T19:06:30+00:00

Since TIZEN group has been used 450 X 140 bmp logo for lunchbox,
this patch tries to change the logo size from 500 X 150 to official size.
By reducing image size, we also save about 35KB.

To make row aligned 4 bytes, add 2 pixels to row. Therefore the real width
of image size is 452.

Signed-off-by: Jonghwa Lee 
Reviewed-by : Przemyslaw Marczak

sandbox: Add LCD driver

2014-03-18T02:05:49+00:00

Add a simple LCD driver which uses SDL to display the image. We update the
image regularly, while still providing for reasonable performance.

Adjust the common lcd code to support sandbox.

For command-line runs we do not want the LCD to be displayed, so add a
--show_lcd option to enable it.

Tested-by: Che-Liang Chiou 
Signed-off-by: Simon Glass

cros_ec: sandbox: Add Chrome OS EC emulation

2014-03-18T02:05:47+00:00

Add a simple emulation of the Chrome OS EC for sandbox, so that it can
perform various EC tasks such as keyboard handling.

Reviewed-by: Vadim Bendebury 
Signed-off-by: Simon Glass

cros_ec: Add a function for reading a flash map entry

2014-03-18T02:05:46+00:00

A flash map describes the layout of flash memory in terms of offsets and
sizes for each region. Add a function to read a flash map entry from the
device tree.

Reviewed-by: Che-Liang Chiou 
Signed-off-by: Simon Glass

kbuild, blackfin: Add CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED

2014-03-07T15:59:06+00:00

Many (but not all) of Blackfin boards give -O2 option
to compile under lib/ directory.
That means lib/ should be speed-optimized,
whereas other parts should be size-optimized.

We want to keep the same behavior,
but do not want to parse board/*/config.mk again and again.
We've got no choice but to invent a new method.

CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED, if it is enabled,
gives -O2 flag only for building under lib/ directory.

Dirty codes which I had marked as "FIX ME"
in board/${BOARD}/config.mk have been deleted.
Instead, CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED has been
defined in include/configs/${BOARD}.h.

Signed-off-by: Masahiro Yamada 
Cc: Sonic Zhang

Add 64-bit data support for memory commands

2014-03-04T17:15:30+00:00

Add 64-bit data for memory commands, such as md, mw, mm, cmp. The new
size ".q " is introduced.

For 64-bit architecture, 64-bit data is enabled by default, by detecting
compiler __LP64__. It is optional for other architectures.

Signed-off-by: York Sun

arm: Switch to -mno-unaligned-access when supported by the compiler

2014-02-26T20:19:32+00:00

When we tell the compiler to optimize for ARMv7 (and ARMv6 for that
matter) it assumes a default of SCTRL.A being cleared and unaligned
accesses being allowed and fast at the hardware level.  We set this bit
and must pass along -mno-unaligned-access so that the compiler will
still breakdown accesses and not trigger a data abort.

To better help understand the requirements of the project with respect
to unaligned memory access, the
Documentation/unaligned-memory-access.txt file has been added as
doc/README.unaligned-memory-access.txt and is taken from the v3.14-rc1
tag of the kernel.

Cc: Albert ARIBAUD 
Cc: Mans Rullgard 
Signed-off-by: Tom Rini

kbuild: use Linux Kernel build scripts

2014-02-19T16:07:50+00:00

Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada 
Tested-by: Gerhard Sittig

kbuild: change out-of-tree build

2014-02-19T16:07:50+00:00

This commit changes the working directory
where the build process occurs.

Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.

That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
  $(obj)u-boot.bin:  $(obj)u-boot

Here, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.

And our old build system changes the current working directory
with "make -C " syntax when descending into the
sub-directories.

On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.

The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.

Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj="
syntax for descending into sub-directories.
(We can write it like "make $(obj)=" with a shorthand.)
This means the current working directory is always the top
of the output directory.

Signed-off-by: Masahiro Yamada 
Tested-by: Gerhard Sittig