u-boot.git/lib_mips, branch LABEL_2006_05_19_1133

GCC-4.x fixes: clean up global data pointer initialization for all boards.

2006-03-31T16:32:53+00:00

Code cleanup, especially MIPS for GCC 4.x

2005-12-03T23:40:34+00:00

Fix U-Boot compilation for MIPS boards using ELDK 4.0

2005-12-01T01:15:07+00:00

Add support for multiple PHYs.

2005-10-28T20:30:33+00:00

* Patches by Richard Woodruff, 10 Jun 2004:

2004-07-01T20:28:03+00:00

  - fix problems with examples/stubs.c for GCC >= 3.4
  - fix problems with gd initialization

* Enable FAT filesystem support for HMI10 board

Fix CONFIG_ETH*ADDR for Ocotea board.

2004-05-29T16:53:29+00:00

Sort Makefile.
Update docs.

* Patch by liang a lei, 9 Jan 2004:

2004-02-07T01:27:10+00:00

  Fix Intel 28F128J3 ID in include/flash.h

* Patch by Masami Komiya, 09 Jan 2004:
  add support for TB0229 board (NEC VR4131 MIPS processor)

* Patch by Leon Kukovec, 12 Dec 2003:
  changed extern __inline__ into static __inline__ in
  include/linux/byteorder/swab.h

* Make CPU clock on ICA-IP board controllable by a "cpuclk"

2003-12-27T19:24:54+00:00

  environment variable which can set to "100", "133", or "150". The
  CPU clock will be configured accordingly upon next reboot. Other
  values are ignored. In case of an invalid or undefined "cpuclk"
  value, the compile-time default CPU clock speed will be used.

* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
  window that is used to access the UART registers by the Linux driver)

* Patch by Reinhard Meyer, 20 Dec 2003:
  Fix clock calculation for the MPC5200 for higher clock frequencies
  (above 2**32 / 10 = 429.5 MHz).

* Patches by David M�ller, 14 Nov 2003:

2003-12-07T18:32:37+00:00

  - board/mpl/common/common_util.c
    * implement support for BZIP2 compressed images
    * various cleanups (printf -> puts, ...)
  - board/mpl/common/flash.c
    * report correct errors to upper layers
    * check the erase fail and VPP low bits in status reg
  - board/mpl/vcma9/cmd_vcma9.c
  - board/mpl/vcma9/flash.c
    * various cleanups (printf -> puts, ...)
  - common/cmd_usb.c
    * fix typo in comment
  - cpu/arm920t/usb_ohci.c
    * support for S3C2410 is missing in #if line
  - drivers/cs8900.c
    * reinit some registers in case of error (cable missing, ...)
  - fs/fat/fat.c
    * support for USB/MMC devices is missing in #if line
  - include/configs/MIP405.h
  - include/configs/PIP405.h
    * enable BZIP2 support
    * enlarge malloc space to 1MiB because of BZIP2 support
  - include/configs/VCMA9.h
    * enable BZIP2 support
    * enlarge malloc space to 1MiB because of BZIP2 support
    * enable USB support
  - lib_arm/armlinux.c
    * change calling convention of ARM Linux kernel as
      described on http://www.arm.linux.org.uk/developer/booting.php

* Patch by Thomas Lange, 14 Nov 2003:
  Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
  support all these AMD boards.

* Patch by Thomas Lange, 14 Nov 2003:
  Workaround for mips au1x00 physical memory accesses (the au1x00
  uses a 36 bit bus internally and cannot access physical memory
  directly. Use the uncached SDRAM address instead of the physical
  one.)

* Patch by Steven Scholz, 10 Oct 2003

2003-10-09T20:09:04+00:00

  - Add support for Altera FPGA ACEX1K

* Patches by Thomas Lange, 09 Oct 2003:
  - Endian swap ATA identity for all big endian CPUs, not just PPC
  - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
    args to linux
  - add support for dbau1x00 board (MIPS32)