u-boot.git/net/eth.c, branch v2010.06 Unnamed repository; edit this file 'description' to name the repository. net/eth.c: eth_mac_skip() is only needed when CONFIG_NET_MULTI is set 2010-06-20T10:30:22+00:00 Wolfgang Denk wd@denx.de 2010-06-20T10:30:22+00:00 9c00b2f0a3fe0f779761607024f99b7690c9776c Move it inside the #ifdef CONFIG_NET_MULTI to avoid eth.c:64: warning: 'eth_mac_skip' defined but not used messages from anumber of old, non-CONFIG_NET_MULTI boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Ben Warren <biggerbadderben@gmail.com> 
Move it inside the #ifdef CONFIG_NET_MULTI to avoid

	eth.c:64: warning: 'eth_mac_skip' defined but not used

messages from anumber of old, non-CONFIG_NET_MULTI boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
Program net device MAC addresses after initializing 2010-05-03T21:52:49+00:00 Ben Warren biggerbadderben@gmail.com 2010-04-26T18:11:46+00:00 ecee9324d73555e744593f3e0d387bec4c566f55 Add a new function to the eth_device struct for programming a network controller's hardware address. After all network devices have been initialized and the proper MAC address for each has been determined, make a device driver call to program the address into the device. Only device instances with valid unicast addresses will be programmed. Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Prafulla Wadaskar <prafulla@marvell.com> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw> 
Add a new function to the eth_device struct for programming a network
controller's hardware address.

After all network devices have been initialized and the proper MAC address
for each has been determined, make a device driver call to program the
address into the device.  Only device instances with valid unicast addresses
will be programmed.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
Tested-by: Prafulla Wadaskar <prafulla@marvell.com>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
net: Trivial coding style issue with empty for statement 2010-05-03T21:52:47+00:00 Detlev Zundel dzu@denx.de 2010-03-31T15:56:08+00:00 aba4b69d01457ab2988e91c8592e5d2ffb10f569 Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
net: pull CONFIG checks out of source and into makefile 2009-12-14T05:31:26+00:00 Mike Frysinger vapier@gentoo.org 2009-11-03T16:35:42+00:00 6ac59c5518e1d2e2ef1c4b8dee99267dfbdf9cdc Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
net: sync env ethaddr to device enetaddr in eth_init() 2009-08-08T00:39:23+00:00 Mike Frysinger vapier@gentoo.org 2009-07-16T01:31:28+00:00 86848a74c3c8eb2f8dd179d039ee604dc45288cf In the previous enetaddr refactoring, the assumption with commit 56b555a644 was that the eth layer would handle the env -> device enetaddr syncing. This was not the case as eth_initialize() is called only once and the sync occurs there. So make sure the eth_init() function does the env -> device sync with every network init. Reported-by: Andrzej Wolski <awolski@poczta.fm> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
In the previous enetaddr refactoring, the assumption with commit 56b555a644
was that the eth layer would handle the env -> device enetaddr syncing.
This was not the case as eth_initialize() is called only once and the sync
occurs there.  So make sure the eth_init() function does the env -> device
sync with every network init.

Reported-by: Andrzej Wolski <awolski@poczta.fm>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
minor debug cleanups in ./net 2009-08-08T00:32:16+00:00 Robin Getz rgetz@blackfin.uclinux.org 2009-07-23T07:01:03+00:00 0ebf04c607b54a352629dcf7e76b76f1785dae54 Minor ./net cleanups - no functional changes - change #ifdef DEBUG printf(); #endif to just debug() - changed __FUNCTION__ to __func__ - got rid of extra whitespace between function and opening brace - removed unnecessary braces on if statements gcc dead code elimination should make this functionally/size equivalent when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3). Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
 Minor ./net cleanups - no functional changes
  - change #ifdef DEBUG printf(); #endif to just debug()
  - changed __FUNCTION__ to __func__
  - got rid of extra whitespace between function and opening brace
  - removed unnecessary braces on if statements

 gcc dead code elimination should make this functionally/size equivalent
 when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3).

 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Add warning about upcoming removal of old Ethernet API 2009-07-23T05:53:44+00:00 Ben Warren biggerbadderben@gmail.com 2009-07-17T07:50:15+00:00 3bd0a877b74b9c005ae7cb892480ccedfa308c20 Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC 2009-06-15T07:13:54+00:00 Ben Warren biggerbadderben@gmail.com 2009-04-28T23:39:19+00:00 6e0d2fc7fe0dcfa2f51ab8931d706940ee364193 Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Switched davinci_emac Ethernet driver to use newer API 2009-06-15T07:13:54+00:00 Ben Warren biggerbadderben@gmail.com 2009-05-26T07:34:07+00:00 8453587ef9137daf98b7c9cf4f3b865f4039cea0 Added CONFIG_NET_MULTI to all Davinci boards Removed all calls to Davinci network driver from board code Added cpu_eth_init() to cpu/arm926ejs/cpu.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Added CONFIG_NET_MULTI to all Davinci boards
Removed all calls to Davinci network driver from board code
Added cpu_eth_init() to cpu/arm926ejs/cpu.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
netloop: updates for NetLoop 2009-05-15T19:19:02+00:00 Heiko Schocher hs@denx.de 2009-04-28T06:36:11+00:00 da95427ce431908714ae5e9f663ee6e2bc3bcc33 Fix some issues introduced from commit: 2f70c49e5b9813635ad73666aa30f304c7fdeda9 suggested by Mike Frysinger. - added some comment for the env_id variable in common_cmd_nvedit.c - moved some variables in fn scope instead of file scope - NetInitLoop now static void Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Ben Warren <biggerbadderben@gmail.com> 
Fix some issues introduced from commit:
2f70c49e5b9813635ad73666aa30f304c7fdeda9
suggested by Mike Frysinger.

- added some comment for the env_id variable in common_cmd_nvedit.c
- moved some variables in fn scope instead of file scope
- NetInitLoop now static void

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>