u-boot.git/net/fastboot.c, branch master Unnamed repository; edit this file 'description' to name the repository. net: add fastboot TCP support 2023-05-05T21:48:44+00:00 Dmitrii Merkurev dimorinny@google.com 2023-04-12T18:49:30+00:00 443d319180a68156ca152d164f446e6789004c1d Known limitations are 1. fastboot reboot doesn't work (answering OK but not rebooting) 2. flashing isn't supported (TCP transport only limitation) The command syntax is fastboot tcp Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Known limitations are
1. fastboot reboot doesn't work (answering OK but not rebooting)
2. flashing isn't supported (TCP transport only limitation)

The command syntax is
fastboot tcp

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Correct SPL uses of FASTBOOT_FLASH 2023-02-09T21:32:26+00:00 Simon Glass sjg@chromium.org 2023-02-05T22:39:53+00:00 64d6bfb660dbb1e29259ef141535c8d68dada2e5 This converts 3 usages of this option to the non-SPL form, since there is no SPL_FASTBOOT_FLASH defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> 
This converts 3 usages of this option to the non-SPL form, since there is
no SPL_FASTBOOT_FLASH defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
fastboot: remove #ifdef CONFIG when it is possible 2023-01-11T20:02:24+00:00 Patrick Delaunay patrick.delaunay@foss.st.com 2022-12-15T09:15:50+00:00 d03799004640abfeb656e9db48d6f9b9e24383fb Much of the fastboot code predates the introduction of Kconfig and has quite a few #ifdefs in it which is unnecessary now that we can use IS_ENABLED() et al. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3l 
Much of the fastboot code predates the introduction of Kconfig and
has quite a few #ifdefs in it which is unnecessary now that we can use
IS_ENABLED() et al.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3l
net: fastboot: make UDP port net: configurable 2022-01-15T16:54:21+00:00 Christian Gmeiner christian.gmeiner@gmail.com 2022-01-13T07:40:06+00:00 046bf8d4c512ad6501fe9e77508bbe1292a29fef The fastboot protocol uses per default the UDP port 5554. In some cases it might be needed to change the used port. The fastboot utility provides a way to specifiy an other port number to use already. fastboot -s udp:192.168.1.76:1234 boot fastboot.img Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> 
The fastboot protocol uses per default the UDP port 5554. In some cases
it might be needed to change the used port. The fastboot utility provides
a way to specifiy an other port number to use already.

  fastboot -s udp:192.168.1.76:1234 boot fastboot.img

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
fastboot: Add support for 'reboot fastboot' command 2020-09-01T12:47:43+00:00 Roman Kovalivskyi roman.kovalivskyi@globallogic.com 2020-07-28T20:35:33+00:00 2b2a771b40876c3db456705d5dcc5b60249d4075 Android 10 adds support for dynamic partitions and in order to support this userspace fastboot must be used[1]. New tool fastbootd is included into recovery. Userspace fastboot works from recovery and is launched if: 1) - Dynamic partitioning is enabled 2) - Boot control block has 'boot-fastboot' value into command field The bootloader is expected to load and boot into the recovery image upon seeing boot-fastboot in the BCB command. Recovery then parses the BCB message and switches to fastbootd mode[2]. Please note that boot script is expected to handle 'boot-fastboot' command in BCB and load into recovery mode. Bootloader must support 'reboot fastboot' command which should reboot device into userspace fastboot to accomodate those changes[3]. Another command that bootloader must support[3] is 'reboot recovery'. This command should simply reboot device into recovery mode. [1] - https://source.android.com/devices/bootloader/fastbootd [2] - https://source.android.com/devices/bootloader/fastbootd#unified_fastboot_and_recovery [3] - https://source.android.com/devices/bootloader/fastbootd#modifications_to_the_bootloader Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com> Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Change-Id: I9d2bdc9a6f6f31ea98572fe155e1cc8341e9af76 
Android 10 adds support for dynamic partitions and in order to support
this userspace fastboot must be used[1]. New tool fastbootd is
included into recovery.

Userspace fastboot works from recovery and is launched if:
1) - Dynamic partitioning is enabled
2) - Boot control block has 'boot-fastboot' value into command field
The bootloader is expected to load and boot into the recovery image
upon seeing boot-fastboot in the BCB command. Recovery then parses the
BCB message and switches to fastbootd mode[2].

Please note that boot script is expected to handle 'boot-fastboot'
command in BCB and load into recovery mode.

Bootloader must support 'reboot fastboot' command which should reboot
device into userspace fastboot to accomodate those changes[3].

Another command that bootloader must support[3] is 'reboot recovery'. This
command should simply reboot device into recovery mode.

[1] - https://source.android.com/devices/bootloader/fastbootd
[2] - https://source.android.com/devices/bootloader/fastbootd#unified_fastboot_and_recovery
[3] - https://source.android.com/devices/bootloader/fastbootd#modifications_to_the_bootloader

Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Change-Id: I9d2bdc9a6f6f31ea98572fe155e1cc8341e9af76
command: Remove the cmd_tbl_t typedef 2020-05-18T22:36:55+00:00 Simon Glass sjg@chromium.org 2020-05-10T17:40:03+00:00 09140113108541b95d340f3c7b6ee597d31ccc73 We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org> 
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
net: fastboot: Fix build when FASTBOOT_FLASH is disabled 2018-07-02T19:14:20+00:00 Alex Kiernan alex.kiernan@gmail.com 2018-06-15T05:06:00+00:00 6dc73df73b2b95ec171d82558c2a0ed1437d8c0a When building without FASTBOOT_FLASH we don't include the intermediate update callback to keep the client alive, so ensure we don't try setting it here. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
When building without FASTBOOT_FLASH we don't include the intermediate
update callback to keep the client alive, so ensure we don't try setting
it here.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
net: fastboot: Merge AOSP UDP fastboot 2018-05-30T09:59:21+00:00 Alex Kiernan alex.kiernan@gmail.com 2018-05-29T15:30:53+00:00 f73a7df984a9820d9beb829b32ccb5c3d55dc152 Merge UDP fastboot support from AOSP: https://android.googlesource.com/platform/external/u-boot/+/android-o-mr1-iot-preview-8 Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Alex Deymo <deymo@google.com> Signed-off-by: Jocelyn Bohr <bohr@google.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Merge UDP fastboot support from AOSP:

  https://android.googlesource.com/platform/external/u-boot/+/android-o-mr1-iot-preview-8

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Alex Deymo <deymo@google.com>
Signed-off-by: Jocelyn Bohr <bohr@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>