u-boot.git/net/mdio-uclass.c, branch master Unnamed repository; edit this file 'description' to name the repository. net: mdio-uclass: introduce dm_eth_phy_connect_interface() 2025-10-10T17:07:44+00:00 Matthias Schiffer matthias.schiffer@ew.tq-group.com 2025-09-30T08:05:10+00:00 8db554dcbb2374a2dea130af56d781732070beb7 dm_eth_phy_connect_interface() is a variant of dm_eth_phy_connect() that allows to set the used PHY mode, in case the MAC driver needs to fix it up. The previously static dm_eth_connect_phy_handle() is renamed and extended for this purpose. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> 
dm_eth_phy_connect_interface() is a variant of dm_eth_phy_connect() that
allows to set the used PHY mode, in case the MAC driver needs to fix it
up. The previously static dm_eth_connect_phy_handle() is renamed and
extended for this purpose.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet" 2024-05-20T19:35:03+00:00 Tom Rini trini@konsulko.com 2024-05-20T19:35:03+00:00 03de305ec48b0bb28554372abb40ccd46dbe0bf9 As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" 2024-05-19T14:16:36+00:00 Tom Rini trini@konsulko.com 2024-05-19T02:20:43+00:00 d678a59d2d719da9e807495b4b021501f2836ca5 When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
net: Remove <common.h> and add needed includes 2024-05-06T21:05:04+00:00 Tom Rini trini@konsulko.com 2024-04-27T14:11:04+00:00 26d4114da22272937c899d67b51498559ba312d2 Remove <common.h> from all "net/" files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> 
Remove <common.h> from all "net/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
net: mdio-uclass: Bind and probe generic Ethernet PHY driver 2024-03-26T23:58:26+00:00 Roger Quadros rogerq@kernel.org 2024-03-05T13:24:53+00:00 052bff838ba34a8f882800fdd78d97370565d2c5 If DM_ETH_PHY is enabled then try to bind and probe the generic Ethernet PHY driver for each child of MDIO bus. This is to ensure that GPIO reset handling is done if available before MDIO bus driver scans for the PHYs. Signed-off-by: Roger Quadros <rogerq@kernel.org> 
If DM_ETH_PHY is enabled then try to bind and probe the
generic Ethernet PHY driver for each child of MDIO bus.

This is to ensure that GPIO reset handling is done if available
before MDIO bus driver scans for the PHYs.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
net: mdio: Handle bus level GPIO Reset 2024-03-07T12:59:16+00:00 Roger Quadros rogerq@kernel.org 2024-02-28T10:35:26+00:00 a0e02c66194593a9983229781c2c6fb51f5b052f Some platforms have bus level Reset controlled by a GPIO line. If available then handle bus reset via GPIO. Signed-off-by: Roger Quadros <rogerq@kernel.org> 
Some platforms have bus level Reset controlled
by a GPIO line. If available then handle bus reset
via GPIO.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Correct SPL uses of PHY_FIXED 2023-03-02T22:45:58+00:00 Simon Glass sjg@chromium.org 2023-02-22T16:33:51+00:00 b51b1a8442e590cdfcb6b110803e87cdf4783dfd This converts 3 usages of this option to the non-SPL form, since there is no SPL_PHY_FIXED defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> 
This converts 3 usages of this option to the non-SPL form, since there is
no SPL_PHY_FIXED defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
net: mdio-uclass: scan for dm mdio children on post-bind 2023-02-02T19:22:08+00:00 Tim Harvey tharvey@gateworks.com 2022-11-30T17:42:44+00:00 f54002d774d1cd215a0f12da7a3c06f539ae92ea If a DM_MDIO driver is used we need to scan the subnodes as well. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de> 
If a DM_MDIO driver is used we need to scan the subnodes as well.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
net: mdio-uclass: add dm_phy_find_by_ofnode() helper 2022-05-04T05:05:51+00:00 Marek Behún marek.behun@nic.cz 2022-04-27T10:41:49+00:00 00b1bad961fff51db71573f5fc6e4e35b47381b2 Add helper to resolve PHY node from it's ofnode via DM MDIO subsystem. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Add helper to resolve PHY node from it's ofnode via DM MDIO subsystem.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA 2022-04-10T05:44:13+00:00 Marek Behún marek.behun@nic.cz 2022-04-06T22:33:03+00:00 ffb0f6f488b9eee2822c3c691778a26e1590694c Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make it compatible with Linux' naming. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> 
Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make
it compatible with Linux' naming.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>