u-boot.git/net, branch v2020.07-rc2 Unnamed repository; edit this file 'description' to name the repository. net: Add eth phy generic driver for shared MDIO 2020-05-10T11:24:48+00:00 Ye Li ye.li@nxp.com 2020-05-03T14:41:14+00:00 5fe419ef2a6154e83aab04c65ec906fef96eb5be For dual ethernet controllers, the HW design may connect ETH phys to one MDIO ports. So two different ethernet drivers have to share MDIO bus. Since two ethernet drivers are independent, we can't ensure their probe order. To resolve this problem, introduce an eth phy generic driver and uclass. After eth-uclass binds, we search the mdio node and binds the phy node with the eth-phy-generic driver. When one eth driver get its phy device, the parent of phy device will probe prior than phy device. So this ensure the eth driver ownes the MDIO bus will be probed before using its MDIO. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> 
For dual ethernet controllers, the HW design may connect ETH phys to
one MDIO ports. So two different ethernet drivers have to share MDIO bus.
Since two ethernet drivers are independent, we can't ensure their probe
order.

To resolve this problem, introduce an eth phy generic driver and uclass.

After eth-uclass binds, we search the mdio node and binds the phy node
with the eth-phy-generic driver.

When one eth driver get its phy device, the parent of phy device will
probe prior than phy device. So this ensure the eth driver ownes the
MDIO bus will be probed before using its MDIO.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
net: eth-uclass: add return value check 2020-05-10T11:24:41+00:00 Peng Fan peng.fan@nxp.com 2020-05-03T14:41:13+00:00 d2b70205dd67f32427dde4f1a7a8966f4924dfad Add return value check Signed-off-by: Peng Fan <peng.fan@nxp.com> 
Add return value check

Signed-off-by: Peng Fan <peng.fan@nxp.com>
net: tftp: remove TFTP_MTU_BLOCKSIZE 2020-04-27T18:55:29+00:00 Patrick Delaunay patrick.delaunay@st.com 2020-04-22T12:18:26+00:00 31d275b095e2c8c5607ab0e95e8342be7071ddf6 Remove the unneeded define TFTP_MTU_BLOCKSIZE. Since the KConfig migration done by commit b618b3707633 ("net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig"), CONFIG_TFTP_BLOCKSIZE is always defined and can be used directly to avoid confusion (fallback to 1468 in code is never used). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
Remove the unneeded define TFTP_MTU_BLOCKSIZE.
Since the KConfig migration done by commit b618b3707633 ("net:
Convert CONFIG_TFTP_BLOCKSIZE to Kconfig"), CONFIG_TFTP_BLOCKSIZE
is always defined and can be used directly to avoid confusion
(fallback to 1468 in code is never used).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
net: tftp: Add help for CONFIG_TFTP_BLOCKSIZE 2020-04-27T18:55:29+00:00 Patrick Delaunay patrick.delaunay@st.com 2020-04-22T12:18:25+00:00 421de7fec831902fb9b88651446cc80ae4045d45 Add help message for the CONFIG_TFTP_BLOCKSIZE default value, as explain in tftp.c before migration in commit b618b3707633 ("net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
Add help message for the CONFIG_TFTP_BLOCKSIZE default value,
as explain in tftp.c before migration in commit b618b3707633
("net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig")

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
net: eth-uclass: Fix message if mac is coming from DT or ROM 2020-04-06T10:52:45+00:00 Michal Simek michal.simek@xilinx.com 2020-03-16T10:36:17+00:00 d4172c940680c1c8aa370898a8d9e8ec0dceaeaf When local-mac-address DT property is specified it is reported the same way as address read from eeprom/ROM. Show properly if mac address is coming from DT or ROM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
When local-mac-address DT property is specified it is reported the same way
as address read from eeprom/ROM. Show properly if mac address is coming
from DT or ROM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
net: tftp: use correct printf codes 2020-03-09T23:11:25+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2020-02-22T07:43:40+00:00 2bcc43b39b95447e8e137df78a1d39ede764caca When printing unsigned numbers use %u. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
When printing unsigned numbers use %u.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
net: convert NET_MAXDEFRAG to Kconfig 2020-02-13T15:10:50+00:00 Rasmus Villemoes rasmus.villemoes@prevas.dk 2020-02-07T15:17:42+00:00 215df01de40bfefc32c86c73e4acbca1bbb74329 Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> 
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
dm: core: Create a new header file for 'compat' features 2020-02-06T02:33:46+00:00 Simon Glass sjg@chromium.org 2020-02-03T14:36:16+00:00 336d4615f8fa774557d14f9b3245daa9e5fe3dbc At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> 
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
common: Move the image globals into image.h 2020-01-17T19:02:35+00:00 Simon Glass sjg@chromium.org 2019-12-28T17:45:03+00:00 8e8ccfe1aa1a3ea0cb88b4438c7a687fcf8632a1 These three globals relate to image handling. Move them to the image header file. Signed-off-by: Simon Glass <sjg@chromium.org> 
These three globals relate to image handling. Move them to the image
header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
image: Rename load_addr, save_addr, save_size 2020-01-17T19:02:35+00:00 Simon Glass sjg@chromium.org 2019-12-28T17:45:02+00:00 bb872dd930ccc0fb7a91c1b8e34b39ce2e9fed06 These global variables are quite short and generic. In fact the same name is more often used locally for struct members and function arguments. Add a image_ prefix to make them easier to distinguish. Signed-off-by: Simon Glass <sjg@chromium.org> 
These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>