u-boot.git/scripts, branch v2015.04-rc3

kconfig: remove unneeded U-Boot extension code

2015-03-02T13:48:14+00:00

This code was introduced to support the multiple .config
configuration in U-Boot.  We do not need it any more.

Signed-off-by: Masahiro Yamada

kconfig: remove unneeded dependency on !SPL_BUILD

2015-02-24T22:06:27+00:00

Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.

Signed-off-by: Masahiro Yamada

kconfig: switch to single .config configuration

2015-02-24T22:06:23+00:00

When Kconfig for U-boot was examined, one of the biggest issues was
how to support multiple images (Normal, SPL, TPL).  There were
actually two options, "single .config" and "multiple .config".
After some discussions and thought experiments, I chose the latter,
i.e. to create ".config", "spl/.config", "tpl/.config" for Normal,
SPL, TPL, respectively.

It is true that the "multiple .config" strategy provided us the
maximum flexibility and helped to avoid duplicating CONFIGs among
Normal, SPL, TPL, but I have noticed some fatal problems:

[1] It is impossible to share CONFIG options across the images.
  If you change the configuration of Main image, you often have to
  adjust some SPL configurations correspondingly.  Currently, we
  cannot handle the dependencies between them.  It means one of the
  biggest advantages of Kconfig is lost.

[2] It is too painful to change both ".config" and "spl/.config".
  Sunxi guys started to work around this problem by creating a new
  configuration target.  Commit cbdd9a9737cc (sunxi: kconfig: Add
  %_felconfig rule to enable FEL build of sunxi platforms.) added
  "make *_felconfig" to enable CONFIG_SPL_FEL on both images.
  Changing the configuration of multiple images in one command is a
  generic demand.  The current implementation cannot propose any
  good solution about this.

[3] Kconfig files are getting ugly and difficult to understand.
  Commit b724bd7d6349 (dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to
  Kconfig) has sprinkled "if !SPL_BUILD" over the Kconfig files.

[4] The build system got more complicated than it should be.
  To adjust Linux-originated Kconfig to U-Boot, the helper script
  "scripts/multiconfig.sh" was introduced.  Writing a complicated
  text processor is a shell script sometimes caused problems.

Now I believe the "single .config" will serve us better.  With it,
all the problems above would go away.  Instead, we will have to add
some CONFIG_SPL_* (and CONFIG_TPL_*) options such as CONFIG_SPL_DM,
but we will not have much.  Anyway, this is what we do now in
scripts/Makefile.spl.

I admit my mistake with my apology and this commit switches to the
single .config configuration.

It is not so difficult to do that:

 - Remove unnecessary processings from scripts/multiconfig.sh
  This file will remain for a while to support the current defconfig
  format.  It will be removed after more cleanups are done.

 - Adjust some makefiles and Kconfigs

 - Add some entries to include/config_uncmd_spl.h and the new file
   scripts/Makefile.uncmd_spl.  Some CONFIG options that are not
   supported on SPL must be disabled because one .config is shared
   between SPL and U-Boot proper going forward.  I know this is not
   a beautiful solution and I think we can do better, but let's see
   how much we will have to describe them.

 - update doc/README.kconfig

More cleaning up patches will follow this.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Simon Glass

kbuild: prepare for moving headers into mach-*/include/mach

2015-02-21T13:23:52+00:00

In U-Boot, SoC-specific headers are placed in
arch/$(ARCH)/include/asm/arch-$(SOC) and a symbolic link to that
directory is created at the early stage of the build process.

Creating and removing a symbolic link during the build is not
preferred.  In fact, Linux Kernel did away with include/asm-$(ARCH)
directories a long time time ago.

As for ARM, now it is possible to collect SoC sources into
arch/arm/mach-$(SOC).  It is also reasonable to move SoC headers
into arch/arm/mach-$(SOC)/include/mach.

This commit prepares for that.
If the directory arch/$(ARCH)/mach-$(SOC)/include/mach exists,
a symbolic to that directory is created.  Otherwise, a symbolic link
to arch/$(ARCH)/include/asm/arch-$(SOC) or arch-$(CPU) is created.

Signed-off-by: Masahiro Yamada

sunxi: Normalise FEL support

2015-02-16T19:15:09+00:00

Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of
creating its own. There are some #ifdefs required in start.S. Future work
will hopefully remove these.

This series is available at u-boot-dm, branch sunxi-working.

Signed-off-by: Simon Glass 
Acked-by: Hans de Goede 
Signed-off-by: Hans de Goede

scripts/Makefile.spl: Add MVEBU DDR code to SPL

2015-02-06T16:24:54+00:00

Signed-off-by: Stefan Roese 
Reviewed-by: Luka Perkov

scripts: add a utility to fill blank fields of doc/README.scrapyard

2015-01-14T15:58:49+00:00

We are removing bunch of non-generic boards these days.

Updating doc/README.scrapyard is a really tedious task, but it can
be automated.  I hope this tool will make our life easier.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Simon Glass

sunxi: Fix CONFIG_UART0_PORT_F build and add it to menuconfig

2015-01-14T13:56:37+00:00

The CONFIG_UART0_PORT_F option has been supported since
    http://git.denx.de/?p=u-boot.git;a=commit;h=ff2b47f6a9cc1025

This option is primarily useful only for low level u-boot debugging
on tablets, where normal UART0 is difficult to access and requires
device disassembly and/or soldering.

This patch now allows it to be selected from menuconfig. A dependency on
SPL_FEL is added because u-boot does not support booting from NAND yet
and also booting from SD card is impossible when a MicroSD breakout board
is plugged into the SD slot.

Additionally a compilation problem is fixed:

common/spl/built-in.o: In function `spl_mmc_load_image':
/tmp/u-boot-sunxi/common/spl/spl_mmc.c:94: undefined reference to `mmc_initialize'
/tmp/u-boot-sunxi/common/spl/spl_mmc.c:96: undefined reference to `find_mmc_device'
/tmp/u-boot-sunxi/common/spl/spl_mmc.c:104: undefined reference to `mmc_init'
scripts/Makefile.spl:206: recipe for target 'spl/u-boot-spl' failed

Signed-off-by: Siarhei Siamashka 
Acked-by: Hans de Goede 
Signed-off-by: Hans de Goede

scripts: fix binutils-version.sh for 'as' without a package.

2015-01-08T16:00:45+00:00

Commit 73c25753 fixed the common issue that binutil packages (tool/organization
that packaged or built the bin-utils) are included in brackets and this may
falsely be recognized as a version.  However, some tools do not provide a
'package' and previously we add the 'Gnu assembler..' to the version.

Strip out the '(package version text)' and then look for a ##.## string.

Signed-off-by: Bill Pringlemeir 
Tested-by: Masahiro Yamada 
Tested-by: Hans de Goede

scripts: fix binutils-version.sh

2014-12-29T21:31:23+00:00

The current binutils-version.sh expects the version string at the end
of the first line.  It turned out to not work with Linaro toolchain:
It has "Linaro 2014.09" at the back.

To fix this issue, let's parse the word right after the close
parenthesis.

Signed-off-by: Masahiro Yamada 
Reported-by: York Sun 
Acked-by: Dirk Behme