u-boot.git/spl, branch v2013.07

Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

2013-06-19T10:53:59+00:00

Conflicts:
	spl/Makefile

exynos: update tzpc to make it common for exynos4 and exynos5

2013-06-04T06:23:17+00:00

This requires that cpu_is_exynos4/5 should be made available before tzpc_init.
Hence this patch also makes necessary changes to have cpu_info in spl and
invokes arch_cpu_init before tzpc_init in low_level_init.S for smdk5250.

Signed-off-by: Inderpal Singh 
Acked-by: Chander Kashyap 
Signed-off-by: Minkyu Kang

imx: spl: Merge libimx-common make rules

2013-05-16T15:44:45+00:00

Signed-off-by: Benoît Thébaudeau

imx: iomux-v3: Add iomux-mx35.h

2013-05-05T15:55:03+00:00

Allow usage of the imx-common/iomux-v3.h framework by including pad settings for
the i.MX35. The content of the file is taken from Linux kernel at commit
267dd34, plus the required changes to make it work in U-Boot.

Signed-off-by: Benoît Thébaudeau

arm: mx5: Add SPL support code to MX5

2013-05-05T15:45:05+00:00

Fix minor adjustments needed to get SPL framework building on MX5.

Signed-off-by: Marek Vasut 
Cc: Albert ARIBAUD 
Cc: Benoît Thébaudeau 
Cc: Fabio Estevam 
Cc: Scott Wood 
Cc: Stefano Babic 
Cc: Tom Rini

imx: Move some i.MX common functions into the imx-common directory

2013-04-22T08:23:42+00:00

This patch moves the following functions into the imx-common
directory:

- mxs_wait_mask_set()
- mxs_wait_mask_clr()
- mxs_reset_block()

These are currently used by i.MX28. But the upcoming GPMI NAND port
for i.MX6 will also use these functions. So lets move them to a
common location to re-use them.

Signed-off-by: Stefan Roese 
Cc: Stefano Babic 
Cc: Marek Vasut 
Cc: Fabio Estevam

ti814x_evm: add ti814x evm board support

2013-03-24T16:49:12+00:00

Add TI814X EVM board directory, config file, and MAINTAINERS
entry. Enable build.

Signed-off-by: Matt Porter 
Reviewed-by: Tom Rini 
[trini: Adapt to recent omap_hsmmc requirements, Matt re-tested]
Signed-off-by: Tom Rini

Refactor linker-generated arrays

2013-03-12T22:28:40+00:00

Refactor linker-generated array code so that symbols
which were previously linker-generated are now compiler-
generated. This causes relocation records of type
R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
code which uses LGA able to run before relocation as
well as after.

Note: this affects more than ARM targets, as linker-
lists span possibly all target architectures, notably
PowerPC.

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
	arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
	arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
	board/ait/cam_enc_4xx/u-boot-spl.lds
	board/davinci/da8xxevm/u-boot-spl-da850evm.lds
	board/davinci/da8xxevm/u-boot-spl-hawk.lds
	board/vpac270/u-boot-spl.lds

Signed-off-by: Albert ARIBAUD

Remove linker lists (LGAs) from SPL linker scripts

2013-03-12T22:28:29+00:00

Many SPL linker scripts needlessly include linker lists (aka LGAs).
Remove them whenever possible; keep it only in the seven am335x_evm
variants (am335x_evm, am335x_evm_uart[1-5], am335x_evm_spiboot),
where there is actual content in output section .u_boot_list.

This commit keeps all u-boot.bin and u-boot-spl.bin in ARM targets
byte-identical.

Signed-off-by: Albert ARIBAUD

spl: support for booting via usbeth

2013-02-18T18:48:04+00:00

In case of usbeth booting just call net_load_image("usb_ether").
This patch also adds CONFIG_SPL_USBETH_SUPPORT and
CONFIG_SPL_MUSB_NEW_SUPPORT config options to enable linking of SPL
against USB gagdet support and new MUSB driver resp.

Signed-off-by: Ilya Yanok