u-boot.git/test/bootm.c, branch master

bootm: test: Move test into boot

2024-11-13T17:56:01+00:00

This test doesn't belong at the top level. Move it into the boot/
directory, to match its implementation.

This test is currently dependent on bloblist, but the real dependency is
on sandbox, so update that.

Signed-off-by: Simon Glass 
Tested-by: Tom Rini  # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

test: Remove and add needed includes

2024-05-06T21:05:04+00:00

Remove  from all "test/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini

test: Fix bootm_test_subst_var() running independently

2022-09-12T22:06:36+00:00

This test relies on the silent_linux env variable being set. Add this
to the code so it can run without relying on other bootm tests having been
run first.

Signed-off-by: Simon Glass

bootm: Fix Linux silent console on newer kernels

2022-06-06T22:01:21+00:00

Linux determines its console based on several sources:

1. the console command line parameter
2. device tree (e.g. /chosen/stdout-path)
3. various other board- and arch-specific sources

If the console parameter specifies a real console (e.g. ttyS0) then that is
used as /dev/console. However, if it does not specify a real console (e.g.
ttyDoesntExist) then *nothing* will be used as /dev/console.
Reading/writing it will return ENODEV. Additionally, no other source will
be used as a console source.

Linux commit ab4af56ae250 ("printk/console: Allow to disable console output
by using console="" or console=null") recently changed the semantics of the
parameter. Previously, specifying console="" would be treated like
specifying some other bad console. This commit changed things so that it
added /dev/ttynull as a console (if available).  However, it also allows
for other console sources. If the device tree specifies a console (such as
if U-Boot and Linux share a device tree), then it will be used in addition
to /dev/ttynull. This can result in a non-silent console.

To avoid this, explicitly set ttynull as the console. This will disable
other console sources. If CONFIG_NULL_TTY is disabled, then this will have
the same behavior as in the past (no output, and writing /dev/console
returns ENODEV).

[1] and [2] have additional background on this kernel change.

[1] https://lore.kernel.org/all/20201006025935.GA597@jagdpanzerIV.localdomain/
[2] https://lore.kernel.org/all/20201111135450.11214-1-pmladek@suse.com/

Signed-off-by: Sean Anderson

test: Add a macros for finding tests in linker_lists

2021-03-12T14:57:30+00:00

At present we use the linker list directly. This is not very friendly, so
add a helpful macro instead. This will also allow us to change the naming
later without updating this code.

Signed-off-by: Simon Glass

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42+00:00

Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include  at all, so
remove that include.

Signed-off-by: Simon Glass 
Signed-off-by: Tom Rini

bootm: Support string substitution in bootargs

2020-12-05T00:48:29+00:00

In some cases it is necessary to pass parameters to Linux so that it will
boot correctly. For example, the rootdev parameter is often used to
specify the root device. However the root device may change depending on
whence U-Boot loads the kernel. At present it is necessary to build up
the command line by adding device strings to it one by one.

It is often more convenient to provide a template for bootargs, with
U-Boot doing the substitution from other environment variables.

Add a way to substitute strings in the bootargs variable. This allows
things like "rootdev=${rootdev}" to be used in bootargs, with the
${rootdev} substitution providing the UUID of the root device.

For example, to substitute the GUID of the kernel partition:

  setenv bootargs "console=/dev/ttyS0 rootdev=${uuid}/PARTNROFF=1
		kern_guid=${uuid}"
  part uuid mmc 2:2 uuid
  bootm

This is particularly useful when the command line from another place. For
example, Chrome OS stores the command line next to the kernel itself. It
depends on the kernel version being used as well as the hardware features,
so it is extremely difficult to devise a U-Boot script that works on all
boards and kernel versions. With this feature, the command line can be
read from disk and used directly, with a few substitutions set up.

Signed-off-by: Simon Glass

bootm: Allow updating the bootargs in a buffer

2020-12-04T21:09:26+00:00

At present we only support updating the 'bootargs' environment
variable. Add another function to update a buffer instead. This will
allow zimage to use this feature.

Also add a lot more tests to cover various cases.

Signed-off-by: Simon Glass