u-boot.git/test/cmd/bdinfo.c, branch main

treewide: move bi_dram[] from bd to gd

2026-06-25T00:13:24Z

Currently, the bi_dram[] information is stored in the board info structure (bd). Because bd is only valid after reserve_board(), dram_init_banksize() must be called late in the initialization process. This limitation is problematic, as it forces us to rely on a variety of bespoke functions to determine board RAM, bank memory sizes, and other early setup requirements. By moving bi_dram[] into the global data (gd), we can run it earlier. This is particularly convenient since boards define their own dram_init_banksize() routines, which do not always rely on parsing Device Tree (DT) memory nodes. Additionally, U-Boot defaults to relocating to the top of the first memory bank. While boards currently use custom functions to override this behavior, having the DRAM bank information available earlier in gd makes relocating to a different bank trivial and standardizes the process. Reviewed-by: Anshul Dalal Tested-by: Michal Simek # Versal Gen 2 Vek385 Tested-by: Anshul Dalal Reviewed-by: Simon Glass Signed-off-by: Ilias Apalodimas Tested-by: Christophe Leroy (CS GROUP)

simplify NET_LEGACY || NET_LWIP condition with NET condition

2026-04-27T17:26:40Z

Since the move to make NET a menuconfig and NO_NET a synonym of NET=n, when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so let's simplify the various checks across the codebase. SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so the proper symbol is still defined in SPL whenever needed. Signed-off-by: Quentin Schulz Reviewed-by: Simon Glass Reviewed-by: Peter Robinson Reviewed-by: Tom Rini

rename NET to NET_LEGACY

2026-04-27T17:26:40Z

Highlight that NET really is the legacy networking stack by renaming the option to NET_LEGACY. This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL. The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is using the legacy networking app so this seems fine to do. This also has the benefit of removing potential confusion on NET being a specific networking stack instead of "any" network stack. Signed-off-by: Quentin Schulz Acked-by: Ilias Apalodimas Reviewed-by: Peter Robinson Reviewed-by: Tom Rini

cmd: bdinfo: fix incorrect Kconfig options check for print_eth()

2026-01-02T21:51:54Z

CMD_NET_LWIP has never existed so it cannot be right. I'm guessing the intent was to allow print_eth() to be called when NET_LWIP is defined (NET means "legacy networking stack" as opposed to NET_LWIP which is the newest (and incompatible) stack). There probably was some mix-up between CMD_NET and NET options. The dependency on CMD_NET seems unnecessary as it seems perfectly fine to run bdinfo without CMD_NET (build and run tested). So let's instead make the dependency on NET || NET_LWIP. Let's sync the unit test as well. Fixes: 95744d2527cb ("cmd: bdinfo: enable -e when CONFIG_CMD_NET_LWIP=y") Signed-off-by: Quentin Schulz Reviewed-by: Jerome Forissier

cmd: bdinfo: provide long help with all options

2025-12-24T08:17:21Z

Document the bdinfo -a, -e and -m options in the long help, but only when they can be used. The string concatenation is a bit odd with two newlines, but it does render properly once in U-Boot CLI. Tested-by: Michal Simek Signed-off-by: Quentin Schulz

cmd/bdinfo: LMB and device-tree are not related

2025-12-24T08:16:03Z

The usage of the LMB library and the device-tree source are not related. Remove the dependency in the bdinfo output and adjust the unit test. Reviewed-by: Ilias Apalodimas Signed-off-by: Heinrich Schuchardt

test: cmd/bdinfo: consider PPC architecture specific info

2025-12-05T14:54:44Z

On the power architecture the bdinfo command prints architecture specific information. The test needs to accept these output lines. Signed-off-by: Heinrich Schuchardt

test: fix bdinfo_test_all boot_params expectation

2025-12-05T14:54:44Z

The value of boot_params is device specific and non-zero on many boards. Signed-off-by: Heinrich Schuchardt

test: bdinfo: correct expected X86 arch info

2025-12-05T14:54:44Z

Skipping to the line starting with tsc reaches the tsc_base output not the final tsc output. Expect all the X86 specific lines in the bdinfo output. Signed-off-by: Heinrich Schuchardt

test: cmd/bdinfo: consider ARM architecture specific info

2025-12-05T14:54:44Z

On ARM the bdinfo command prints architecture specific information. The test needs to accept these output lines. Signed-off-by: Heinrich Schuchardt Acked-by: Ilias Apalodimas