u-boot.git/test/cmd, branch next

Merge tag 'v2026.10-rc3' into next

2026-08-25T01:31:25Z

test: cmd: add a test for bootd

2026-08-22T00:01:02Z

There is no test for the bootd command. Add one to the cmd suite that covers the documented behaviour: bootd and its "boot" alias run the command held in the bootcmd environment variable, and the return value of bootd is the one of that command. Also assert the recursion guard in cmd_process(), which is part of the code bootd carries. Reviewed-by: Simon Glass Signed-off-by: Mehmet Fide

test: cmd: Add gzwrite chunk boundary regression test

2026-08-20T15:59:25Z

Add a deterministic regression test for the gzwrite() case where a decompression input chunk is exhausted at exactly the same time as the write buffer fills up. Build a gzip file by hand from two 1 KiB stored deflate blocks and pick a chunk size that covers exactly the first block header plus its payload, so that with a 1 KiB write buffer the first input chunk runs out precisely when the write buffer is full. Unlike the existing random data test, which only hits this corner case for rare byte patterns (about 1 percent of runs on sandbox64), this test fails 20 out of 20 runs without the preceding gunzip fix: Error: inflate() returned -5 and passed 100 out of 100 runs with it. Signed-off-by: Aristo Chen Reviewed-by: Simon Glass

Merge patch series "some string cleanup, and a tweak of the "config" command"

2026-07-21T19:52:00Z

Rasmus Villemoes says: This started by me wanting something like what patch 8 does. That wasn't too hard, except we had no strcasestr(), and also our regex engine (which I didn't really want to pull into the mix anyway) doesn't have a flag that requests case-insensitive matching. So I wanted to add strcasestr(), but then I stumbled on a bunch of stuff that should be cleaned up in str-land. Link: https://lore.kernel.org/r/20260708203711.849489-1-rv@rasmusvillemoes.dk

test: add test of 'config' command

2026-07-21T19:51:07Z

Add some test cases for the 'config' command, including the ability to filter the output. Signed-off-by: Rasmus Villemoes Reviewed-by: Simon Glass

test: cmd: part: fix integer handling in setup_gpt_partitions()

2026-07-13T23:06:37Z

Coverity reports an INTEGER_OVERFLOW issue because ut_asserteq() compares an unsigned int (mmc_dev_num) with ret, which can hold a negative error code. Addresses-Coverity-ID: CID 646439: Integer handling issues (INTEGER_OVERFLOW) Signed-off-by: Dario Binacchi Reviewed-by: Quentin Schulz

treewide: move bi_dram[] from bd to gd

2026-06-25T00:13:24Z

Currently, the bi_dram[] information is stored in the board info structure (bd). Because bd is only valid after reserve_board(), dram_init_banksize() must be called late in the initialization process. This limitation is problematic, as it forces us to rely on a variety of bespoke functions to determine board RAM, bank memory sizes, and other early setup requirements. By moving bi_dram[] into the global data (gd), we can run it earlier. This is particularly convenient since boards define their own dram_init_banksize() routines, which do not always rely on parsing Device Tree (DT) memory nodes. Additionally, U-Boot defaults to relocating to the top of the first memory bank. While boards currently use custom functions to override this behavior, having the DRAM bank information available earlier in gd makes relocating to a different bank trivial and standardizes the process. Reviewed-by: Anshul Dalal Tested-by: Michal Simek # Versal Gen 2 Vek385 Tested-by: Anshul Dalal Reviewed-by: Simon Glass Signed-off-by: Ilias Apalodimas Tested-by: Christophe Leroy (CS GROUP)

test: cmd: part: add UUID lookup tests

2026-05-12T13:52:01Z

Extend the 'part' command unit tests to include partition lookup via UUID. This ensures that the 'number', 'start', and 'size' subcommands consistently handle UUIDs as partition identifiers, maintaining parity with the name-based lookup functionality. Signed-off-by: Dario Binacchi Reviewed-by: Simon Glass

test: cmd: add unit tests for part command

2026-05-12T13:52:01Z

Add unit tests for the 'part' command, specifically for the 'number', 'start', and 'size' subcommands. These tests establish a baseline for the current partition lookup functionality by name. This foundation will be used by subsequent patches to extend the command, ensuring consistent behavior as new features are introduced. Signed-off-by: Dario Binacchi Reviewed-by: Simon Glass

Merge patch series "net: migrate NO_NET out of the networking stack choice"

2026-04-27T17:28:25Z

Quentin Schulz says: This migrates the net options away from the main Kconfig to net/Kconfig, rename the current NET option to NET_LEGACY to really highlight what it is and hopefully encourage more people to use lwIP, add a new NET menuconfig (but keep NO_NET as an alias to NET=n for now) which then allows us to replace all the "if legacy_stack || lwip_stack" checks with "if net_support" which is easier to read and maintain. The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed for now even when no network is configured? Likely due to include/net-common.h with PKTBUFSRX? No change in behavior is intended. Only change in defconfig including other defconfigs where NO_NET=y or NET is not set, in which case NO_NET is not set or NET=y should be set in the top defconfig. Similar change required for config fragments. See commit log in patch adding NET menuconfig for details. This was tested based on 70fd0c3bb7c2 ("x86: there is no CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up similarly as in "build all platforms in a single job" GitLab CI job. #!/usr/bin/env bash set -o pipefail set -eux ARGS="-BvelPEWM --reproducible-builds --step 0" ./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $* ./tools/buildman/buildman -o ${O} $ARGS -Ssd $* O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt I can't really decipher the log.txt, but there's no line starting with + which would be an error according to tools/buildman/builder.py help text. Additionally, because I started the script with set -e set and because buildman has an exit code != 0 when it fails to build a board, and I have the summary printed (which is the second buildman call), I believe it means all builds passed. The summary is the following: aarch64: (for 537/537 boards) all +0.0 rodata +0.0 uniphier_v8 : all +1 rodata +1 u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1) function old new delta data_gz 10640 10641 +1 arm: (for 733/733 boards) all -0.0 rodata -0.0 uniphier_v7 : all -1 rodata -1 u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1) function old new delta data_gz 11919 11918 -1 opos6uldev : all -3 rodata -3 u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3) function old new delta data_gz 18778 18775 -3 uniphier_ld4_sld8: all -3 rodata -3 u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3) function old new delta data_gz 11276 11273 -3 stemmy : all -20 rodata -20 u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20) function old new delta data_gz 15783 15763 -20 As far as I could tell this data_gz is an automatically generated array when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored in binary form. Because I'm changing the name of symbols, replacing a menu with a menuconfig, additional text makes it to .config and the "# Networking" section in .config disappears. Here is the diff for the 5 defconfigs listed above, generated with: for f in build/*-m; do diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config done (-m is the build directory for master, and without the suffix, it's the top commit of this series) """ --- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200 +++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200 @@ -970,4 +969,0 @@ - -# -# Networking -# @@ -975,0 +972 @@ +CONFIG_NET_LEGACY=y --- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200 +++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200 @@ -733,4 +732,0 @@ - -# -# Networking -# @@ -738,2 +733,0 @@ -# CONFIG_NET is not set -# CONFIG_NET_LWIP is not set --- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200 +++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200 @@ -997,4 +996,0 @@ - -# -# Networking -# @@ -1002,0 +999 @@ +CONFIG_NET_LEGACY=y --- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200 +++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200 @@ -1004,4 +1003,0 @@ - -# -# Networking -# @@ -1009,0 +1006 @@ +CONFIG_NET_LEGACY=y --- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200 +++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200 @@ -875,4 +874,0 @@ - -# -# Networking -# @@ -880,0 +877 @@ +CONFIG_NET_LEGACY=y """ This is fine: - Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't be in .config anymore. - opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have (old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but CONFIG_NET_LEGACY also needs to be defined now to reflect the stack choice (even if default), - stemmy has CONFIG_NO_NET set, which means CONFIG_NET and CONFIG_NET_LWIP are not reachable anymore hence why they don't need to be part of .config, GitLab CI was run on this series (well, not exactly, but it's only changes to the git logs that were made): https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849 It passes. Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de