u-boot.git/test/cmd, branch v2023.04-rc2

cmd: Add a SEAMA image load command

2023-02-06T22:10:15+00:00

Add a command to load SEAMA (Seattle Image), a NAND flash
on-flash storage format.

This type of flash image is found in some D-Link routers such
as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and
DCH-M225, as well as in WD and NEC routers on the ath79
(MIPS), Broadcom BCM53xx, and RAMIPS platforms.

This U-Boot command will read and decode a SEAMA image from
raw NAND flash on any platform. As it is always using big endian
format for the data decoding is always necessary on platforms
such as ARM.

The command is needed to read a SEAMA-encoded boot image on the
D-Link DIR-890L router for boot from NAND flash in an upcoming
port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx)
architecture.

A basic test and documentation is added as well. The test must
be run on a target with NAND flash support and at least one
resident SEAMA image in flash.

Cc: Rafał Miłecki 
Signed-off-by: Linus Walleij

video: Add font functions to the vidconsole API

2023-01-16T23:26:50+00:00

Support for fonts currently depends on the type of vidconsole in use. Add
two new methods to enumerate fonts and to set the font.

Fix a few other method comments while we are here.

Signed-off-by: Simon Glass

test: cmd: exit: Add unit test for exit and partly run commands

2023-01-11T20:02:24+00:00

Add a test which validates that exit from environment script works as
expected, including return value propagation and clipping to positive
integers.

Reviewed-by: Simon Glass 
Signed-off-by: Marek Vasut

test: cmd: add test for wget command.

2022-11-28T18:06:40+00:00

Simulate a TCP HTTP server's response for testing wget command.

Signed-off-by: Ying-Chun Liu (PaulLiu) 
Cc: Christian Gmeiner 
Cc: Joe Hershberger 
Cc: Michal Simek 
Cc: Ramon Fried 
Cc: Simon Glass 
Reviewed-by: Simon Glass 
Reviewed-by: Ramon Fried

test: Disable part of the setexpr test for now

2022-11-22T22:14:25+00:00

This fails in CI for unknown reasons. Disable the last assert for now.

Signed-off-by: Simon Glass

test: cmd: fdt: Add fdt get value test case

2022-11-22T22:13:35+00:00

Add test case for 'fdt get value' sub command.

The test case can be triggered using:
"
./u-boot -d u-boot.dtb -c 'ut fdt'
"

Acked-by: Heinrich Schuchardt 
Signed-off-by: Marek Vasut

video: Add commands to list and change fonts

2022-10-30T19:01:40+00:00

Add a new 'font' command which allows the fonts to be listed as well as
selecting a different font and size.

Allow the test to run on sandbox, where multiple font/size combinations
are supported, as well as sandbox_flattree, where they are not.

Signed-off-by: Simon Glass

fdt: Show a message when the working FDT changes

2022-10-18T03:17:12+00:00

The working FDT is the one which comes from the OS and is fixed up by
U-Boot. When the bootm command runs, it sets up the working FDT to be the
one it is about to pass to the OS, so that fixups can happen.

This seems like an important step, so add a message indicating that the
working FDT has changed. This is shown during the running of the bootm
command.

Signed-off-by: Simon Glass

test: run setexpr test only on sandbox

2022-10-12T12:56:24+00:00

The test relies on memory being available at 0x0. This in not valid for
many boards.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass

test: cmd: add test for temperature command

2022-10-11T20:03:04+00:00

Add simple test for the temperature command.

Signed-off-by: Robert Marko 
Reviewed-by: Simon Glass