u-boot.git/test/dm/test.dts, branch master

test: dm: test.dts - move to sandbox dts directory

2015-05-15T01:59:07+00:00

The file test.dts from driver model test directory,
was compiled by call dtc in script: test/dm/test-dm.sh.

This doesn't allow for including of dtsi files and using
of C preprocessor routines in this dts file.

Since the mentioned script builds U-Boot before tests,
then moving the test.dts file into sandbox dts directory
is reasonable.

Signed-off-by: Przemyslaw Marczak 
Acked-by: Simon Glass 
Tested on sandbox:
Tested-by: Simon Glass

dm: rtc: Add tests for real-time clocks

2015-05-06T02:58:41+00:00

Add some simple tests to verify that the RTC uclass works correctly in
U-Boot.

Signed-off-by: Simon Glass

dm: test: dts: Sort the aliases in the test device tree file

2015-05-06T02:58:40+00:00

Sort these aliases to avoid confusion as to what is present.

Signed-off-by: Simon Glass 
Reviewed-by: Joe Hershberger

dm: usb: Add tests for the USB uclass

2015-04-18T17:11:30+00:00

This adds a simple test for probing and a functional test using the flash
stick emulator, which tests a large chunk of the USB stack.

Signed-off-by: Simon Glass 
Reviewed-by: Marek Vasut

dm: eth: Add support for aliases

2015-04-18T17:11:13+00:00

Allow network devices to be referred to as "eth0" instead of
"eth@12345678" when specified in ethact.

Add tests to verify this behavior.

Signed-off-by: Joe Hershberger 
Reviewed-by: Simon Glass

test: dm: eth: Add tests for the eth dm implementation

2015-04-18T17:11:12+00:00

Add a test for the eth uclass using the sandbox eth driver. Verify basic
functionality of the network stack / eth uclass by exercising the ping
function.

Signed-off-by: Joe Hershberger 
Reviewed-by: Simon Glass

dm: pci: Add driver model tests for PCI

2015-04-18T17:11:09+00:00

Add some basic tests to check that things work as expected with sandbox.

Signed-off-by: Simon Glass

dm: core: Add a flag to control sequence numbering

2015-01-30T00:09:55+00:00

At present we try to use the 'reg' property and device tree aliases to give
devices a sequence number. The 'reg' property is often actually a memory
address, so the sequence numbers thus-obtained are not useful. It would be
better if the devices were just sequentially numbered in that case. In fact
neither I2C nor SPI use this feature, so drop it.

Some devices need us to look up an alias to number them within the uclass.
Add a flag to control this, so it is not done unless it is needed.

Adjust the tests to test this new behaviour.

Signed-off-by: Simon Glass 
Reviewed-by: Masahiro Yamada

dm: gpio: Add better functions to request GPIOs

2015-01-30T00:09:51+00:00

At present U-Boot sort-of supports the standard way of reading GPIOs from
device tree nodes, but the support is incomplete, a bit clunky and only
works for GPIO bindings where #gpio-cells is 2.

Add new functions to request GPIOs, taking full account of the device
tree binding. These permit requesting a GPIO with a simple call like:

   gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN);

This will request the GPIO, looking at the device's node which might be
this, for example:

   cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>;

The GPIO will be set to input mode in this case and polarity will be
honoured by the GPIO calls.

It is also possible to request and free a list of GPIOs.

Signed-off-by: Simon Glass

dm: i2c: Add tests for I2C

2014-12-11T20:18:43+00:00

Add some basic tests to check that the system works as expected.

Signed-off-by: Simon Glass 
Acked-by: Heiko Schocher