This is the last place outside of cyclic.c that references
cyclic_run() directly. Replace by schedule(), so that cyclic_run() can
be made private. This also better matches what I believe commit
29caf9305b6f ("cyclic: Use schedule() instead of WATCHDOG_RESET()")
intended to do.

Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>

Back when I added this driver in commit 2ac8490412c9, I wrote

    The corresponding linux driver apparently has support for some
    watchdog circuits which can be disabled by tri-stating the gpio, but I
    have never actually encountered such a chip in the wild;

That has changed now; I have a board with just such a watchdog on my
desk currently. Add support for that.

- For a hw_algo="toggle" device, the gpio is requested as output if the
  always-running flag is set, otherwise as input.

- The ->start() method is updated to change the direction to output when
  required (i.e. it is not always-running).

- The ->stop() method is implemented, but of course reports failure if
  always-running.

As I still haven't met any hw_algo="level" devices, I'm not entirely
sure how they fit in, but I'm borrowing logic from the corresponding
linux driver:

- In ->probe(), such devices always request the gpio as GPIOD_IS_OUT.

- In ->stop(), the linux driver has an "eternal ping" comment and sets
  the gpio to (logic) high.

Stefan:
Added necessary changes in test/dm/wdt.c to fix CI build breakage, as
suggested by Rasmus.

Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>

The UT_TESTF_ macros read as 'unit test test flags' which is not right.
Rename to UTF ('unit test flags').

This has the benefit of being shorter, which helps keep UNIT_TEST()
declarations on a single line.

Give the enum a name and reference it from the UNIT_TEST() macros while
we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

Remove <common.h> from all "test/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

For some time now running sandbox with -T produces an error:

   Core:  270 devices, 95 uclasses, devicetree: board
   WDT:   Not starting wdt-gpio-toggle
   wdt_gpio wdt-gpio-level: Request for wdt gpio failed: -16
   WDT:   Not starting wdt@0
   MMC:   mmc2: 2 (SD), mmc1: 1 (SD), mmc0: 0 (SD)

Use an unallocated GPIO to avoid this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 1fc45d6483d ("watchdog: add pulse support to gpio watchdog driver")
Reviewed-by: Stefan Roese <sr@denx.de>

Globally replace all occurances of WATCHDOG_RESET() with schedule(),
which handles the HW_WATCHDOG functionality and the cyclic
infrastructure.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]

A common external watchdog circuit is kept alive by triggering a short
pulse on the reset pin. This patch adds support for this use case, while
making the algorithm configurable in the devicetree.

The "linux,wdt-gpio" driver being modified is based off the equivalent
driver in the Linux kernel, which provides support for this algorithm.
This patch brings parity to this driver, and is kept aligned with
the functionality and devicetree configuration in the kernel.

It should be noted that this adds a required property named 'hw_algo'
to the devicetree binding, following suit with the kernel. I'm happy to
make this backward-compatible if preferred.

Signed-off-by: Paul Doelle <paaull.git@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

Check that the watchdog_reset() implementation in wdt-uclass behaves
as expected:

- resets all activated watchdog devices
- leaves unactivated/stopped devices alone
- that the rate-limiting works, with a per-device threshold

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>