Rework dev_phys_to_bus() and dev_bus_to_phys() to respect the size
of the area specified in dma-ranges DT property. The area outside
of ranges is remapped 1:1, while the area in the ranges is remapped
according to the description in the dma-ranges property.

Adjust the test to test the area within the remapped range, not area
outside the remapped range, which was incorrect.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>

The virtio spec clearly states in "3.1.1 Driver Requirements: Device
Initialization" the sequence a client has to follow after device reset.
Because u-boot resets here again, it also needs to set the "acknowledge"
bit again even if this was done in virtio_uclass_child_post_bind already
once before.

Signed-off-by: Christian Pötzsch <christian.poetzsch@kernkonzept.com>
Signed-off-by: Adam Lackorzynski <adam@l4re.org>
[trini: Add VIRTIO_CONFIG_S_ACKNOWLEDGE flag check to the test]
Signed-off-by: Tom Rini <trini@konsulko.com>

Meet Patel <meet.patel2@arm.com> says:

The virtio-rng test to verify effective handling of oversized return
buffers checks that an (undocumented) error is raised, instead of the
real concern, which is the surrounding buffer integrity following a rng
function call.
Update the test to check that the other contents of a buffer remain
unchanged instead of looking for an error code.

Link: https://lore.kernel.org/r/20260309165505.4001705-1-meet.patel2@arm.com

The virtio-rng test to verify effective handling of oversized return
buffers checks that an (undocumented) error is raised, instead of the
real concern, which is the surrounding buffer integrity following a rng
function call.
Update the test to check that the other contents of a buffer remain
unchanged instead of looking for an error code.

Signed-off-by: Kavin Gunasekara <kavin.gunasekara@arm.com>
Signed-off-by: Meet Patel <meet.patel2@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.

Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Add a test for binding of multiple drivers with the same compatible. If
one of the drivers returns -ENODEV the other one needs to be bound.

Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>

* Expected values must always be the first arguments.
* Long values on 64 bit systems require ut_asserteq_64() for checking

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.

CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776

Highlights:

  *
    SPL / MMC:
      o
        Fix Kconfig handling for
        SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
      o
        Correct raw sector calculations and respect explicit sector values
        when loading U-Boot from MMC in SPL
      o
        Adjust raw MMC loading logic for SoCFPGA platforms
  *
    EFI boot:
      o
        Permit EFI booting on SoCFPGA platforms
      o
        Disable mkeficapsule tool build for Arria 10 where unsupported
  *
    Agilex5:
      o
        Upgrade SDHCI controller from SD4HC to SD6HC
      o
        Enable MMC and Cadence SDHCI support in defconfig
      o
        Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
      o
        Revert incorrect GPIO configuration for SDIO_SEL
      o
        Refine U-Boot DT handling for SD and eMMC boot variants
  *
    SPI:
      o
        Allow disabling the DesignWare SPI driver in SPL via Kconfig
  *
    Board / configuration fixes:
      o
        Enable random MAC address generation for Cyclone V
      o
        Fix DE0-Nano-SoC boot configuration
      o
        Remove obsolete or conflicting options from multiple legacy
        SoCFPGA defconfigs

While this change was intended to fix a mistake in the code, of calling
the ERR_PTR macro but not making use of the result, it seems that
functionally platforms depend on the loop not existing here. The TI K3
families of platforms for example were broken by this commit.

This reverts commit fe780310cfa8bf5a093894b5cd7fe85c6b02fd91.

Reported-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

The current FDT decoding tests calculate the memory required
for FDT manipulation by directly adding a fixed margin to
fdt_totalsize(gd->fdt_blob). The static analyzer flagged
"gd->fdt_blob->totalsize" as a tainted value being passed
to fdt_open_into().

Ensure the size is validated by checking that the total size
is within a reasonable maximum FDT limit for unit tests.

Signed-off-by: Adriana Nicolae <adriana@arista.com>