The revisions are usually dates in hex-decimal format representing
YYYYmmdd. Print them in hex to see this clearly.

Before:
  ...
  FACP 000e5420 0000f4 (v06 U-BOOT U-BOOTBL 538970376 INTL 0)
  DSDT 000e4780 000ba0 (v02 U-BOOT U-BOOTBL 65536 INTL 538968870)
  ...
After:
  ...
  FACP 000e5420 0000f4 (v06 U-BOOT U-BOOTBL 20200908 INTL 0)
  DSDT 000e4780 000ba0 (v02 U-BOOT U-BOOTBL 10000 INTL 20200326)
  ...

Fixes: 0b885bcfd9b0 ("acpi: Add an acpi command")
Cc: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Enable PCI memory regions in ranges property to be of multiple entry.
This helps to add support for SoC's like OcteonTX/TX2 where every
peripheral is on PCI bus.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>

- Add CCF clocks definitions for iMX6Q enet (ETH)
- Several fixes for CCF framework - the most notable is the one, which
  adds get_rate helper to clk-mux.c
- Improvements for clk command - better visibility and alignment.

The previous version of the get_rate helper does not work if the mux
clock parent is changed after the probe. This error has not been
detected because this condition has not been tested. The error occurs
because the set_parent helper does not change the parent of the clock
device but only the clock selection register. Since changing the parent
of a probed device can be tricky, the new version of the get_rate helper
provides the rate of the selected clock and not that of the parent.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

The top-level framework flags are passed as parameter to the common
clock framework (ccf) registration routines without being used.
Checks of the flags setting added by the patch have been added in the
ccf test.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Unlike the other clock types, in the case of the gated clock, a new
driver has been developed which does not use the registering routine
provided by the common clock framework.
The addition of the ecspi0 clock to sandbox therefore allows testing
the ccf gate clock.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>

Add flat tree test case to cover devfdt_get_addr_ptr function.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Usage of lists_bind_fdt() in bind command imposes to add
a compatible string for bind-test node.

Others impacts are:
  - bind-test node is binded at sandbox start, so no need to bind it
    in test_bind_unbind_with_node() test.
  - As explained just above, after sandbox start, now a phy exist.
    In test/dm/phy.c, it was verified that a third phy didn't exist,
    now we must verified that a fourth phy doesn't exist.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Remove adhoc dt binding for fixed-partition definition for i2c eeprom.
fixed-partition are using reg property instead of offset/size pair.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

The test flags used by driver model are currently not available to other
tests. Rather than creating two sets of flags, make these flags generic
by changing the DM_ prefix to UT_ and moving them to the test.h header.

This will allow adding other test flags without confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>