u-boot.git/test/py/tests/test_android, branch next

test: abootimg: Add test for bootconfig handling

2026-01-16T13:07:58+00:00

Add test to verify that androidboot.* parameters are correctly extracted
from bootargs and appended to the bootconfig section when using
'abootimg get ramdisk' with boot image v4 and vendor_boot image.

The test verifies:
- androidboot.* parameters are removed from bootargs
- They are appended to the bootconfig section in the ramdisk
- Non-androidboot parameters remain in bootargs
- The bootconfig trailer is properly updated

Reviewed-by: Simon Glass 
Signed-off-by: Guillaume La Roque (TI.com) 
Reviewed-by: Mattijs Korpershoek 
Link: https://lore.kernel.org/r/20260112-bootconfig-v5-5-79b242159ac7@baylibre.com
[mkorpershoek: dropped whitespace changes from original patch]
Signed-off-by: Mattijs Korpershoek

test/py: android: Point fdt command to aligned addresses

2025-12-05T16:21:47+00:00

Newer versions of libfdt strictly check whether the FDT blob
passed to them is at 8-byte aligned offset, if it is not, then
the library fails checks with -FDT_ERR_ALIGNMENT . Currently,
'abootimg get dtb --index=1 addr size' may return non 8-byte
aligned FDT address which points directly into the abootimg.
Copy the result into temporary location before validation to
avoid FDT alignment check failure.

Signed-off-by: Marek Vasut 
Reviewed-by: Mattijs Korpershoek 
Link: https://lore.kernel.org/r/20251119193311.127633-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek

test/py: Drop assigning ubman to cons

2025-03-15T11:47:04+00:00

Now that we have a shorter name, we don't need this sort of thing. Just
use ubman instead.

Signed-off-by: Simon Glass

test/py: Drop importing utils as util

2025-03-15T11:02:04+00:00

Now that we have a shorter name, we don't need this sort of thing.
Drop it.

Signed-off-by: Simon Glass 
Reviewed-by: Mattijs Korpershoek  # test_android

test/py: Drop u_boot_ prefix on test files

2025-03-15T11:02:04+00:00

We know this is U-Boot so the prefix serves no purpose other than to
make things longer and harder to read. Drop it and rename the files.

Signed-off-by: Simon Glass 
Reviewed-by: Mattijs Korpershoek  # test_android / test_dfu

test/py: Shorten u_boot_console

2025-03-15T10:38:38+00:00

This fixture name is quite long and results in lots of verbose code.
We know this is U-Boot so the 'u_boot_' part is not necessary.

But it is also a bit of a misnomer, since it provides access to all the
information available to tests. It is not just the console.

It would be too confusing to use con as it would be confused with
config and it is probably too short.

So shorten it to 'ubman'.

Signed-off-by: Simon Glass 
Link: https://lore.kernel.org/u-boot/CAFLszTgPa4aT_J9h9pqeTtLCVn4x2JvLWRcWRD8NaN3uoSAtyA@mail.gmail.com/

cmd: bcb: introduce 'ab_dump' command to print BCB block content

2024-10-24T07:45:55+00:00

It's really helpful to have the ability to dump BCB block for debugging
A/B logic on the board supported this partition schema.

Command 'bcb ab_dump' prints all fields of bootloader_control struct
including slot_metadata for all presented slots.

Output example:
=====
> board# bcb ab_dump ubi 0#misc
> Read 512 bytes from volume misc to 000000000bf07580
> Read 512 bytes from volume misc to 000000000bf42f40
> Bootloader Control:       [misc]
> Active Slot:              _a
> Magic Number:             0x42414342
> Version:                  1
> Number of Slots:          2
> Recovery Tries Remaining: 0
> CRC:                      0x2c8b50bc (Valid)
>
> Slot[0] Metadata:
> 	- Priority:         15
> 	- Tries Remaining:  0
> 	- Successful Boot:  1
> 	- Verity Corrupted: 0
>
> Slot[1] Metadata:
> 	- Priority:         14
> 	- Tries Remaining:  7
> 	- Successful Boot:  0
> 	- Verity Corrupted: 0
====

The ab_dump command allows you to display ABC data directly on the
U-Boot console. During an A/B test execution, this test verifies the
accuracy of each field within the ABC data.

Signed-off-by: Dmitry Rokosov 
Reviewed-by: Mattijs Korpershoek 
Tested-by: Mattijs Korpershoek  # vim3_android
Link: https://lore.kernel.org/r/20241017-android_ab_master-v5-5-43bfcc096d95@salutedevices.com
Signed-off-by: Mattijs Korpershoek

treewide: bcb: move ab_select command to bcb subcommands

2024-10-24T07:45:55+00:00

To enhance code organization, it is beneficial to consolidate all A/B
BCB management routines into a single super-command.
The 'bcb' command is an excellent candidate for this purpose.

This patch integrates the separate 'ab_select' command into the 'bcb'
group as the 'ab_select' subcommand, maintaining the same parameter list
for consistency.

Signed-off-by: Dmitry Rokosov 
Reviewed-by: Mattijs Korpershoek 
Tested-by: Mattijs Korpershoek  # vim3_android
Link: https://lore.kernel.org/r/20241017-android_ab_master-v5-3-43bfcc096d95@salutedevices.com
Signed-off-by: Mattijs Korpershoek

avb: move SPDX license identifiers to the first line

2024-02-15T09:38:34+00:00

Move SPDX license identifiers to the first line, so it conforms
to license placement rule [1]:

Placement:
The SPDX license identifier in kernel files shall be added at the first
possible line in a file which can contain a comment.  For the majority
of files this is the first line, except for scripts which require the
'#!PATH_TO_INTERPRETER' in the first line.  For those scripts the SPDX
identifier goes into the second line.

[1] https://www.kernel.org/doc/Documentation/process/license-rules.rst

Reviewed-by: Mattijs Korpershoek 
Signed-off-by: Igor Opaniuk 
Link: https://lore.kernel.org/r/20240209192045.3961832-3-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek

global: Use proper project name U-Boot

2023-06-12T11:24:31+00:00

Use proper project name in comments, Kconfig, readmes.

Reviewed-by: Neil Armstrong 
Acked-by: Ilias Apalodimas 
Reviewed-by: Stefan Roese 
Reviewed-by: Qu Wenruo 
Signed-off-by: Michal Simek 
Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com