u-boot.git/test/py/tests/test_efi_capsule, branch v2022.04

efi_loader: test/py: Reset system after capsule update on disk

2022-02-26T06:37:01Z

Add a cold reset soon after processing capsule update on disk. This is required in UEFI specification 2.9 Section 8.5.5 "Delivery of Capsules via file on Mass Storage device" as; In all cases that a capsule is identified for processing the system is restarted after capsule processing is completed. This also reports the result of each capsule update so that the user can notice that the capsule update has been succeeded or not from console log. Signed-off-by: Masami Hiramatsu Reviewed-by: Heinrich Schuchardt

test/py: efi_capsule: check the results in case of CAPSULE_AUTHENTICATE

2022-02-11T19:07:55Z

Before the capsule authentication is supported, this test script works correctly, but with the feature enabled, most tests will fail due to unsigned capsules. So check the results depending on CAPSULE_AUTHENTICATE or not. Signed-off-by: AKASHI Takahiro Reviewed-by: Simon Glass

test/py: efi_capsule: add a test for "--guid" option

2022-02-11T19:07:55Z

This test scenario tests a new feature of mkeficapsule, "--guid" option, which allows us to specify FMP driver's guid explicitly at the command line. Signed-off-by: AKASHI Takahiro

test/py: efi_capsule: align with the syntax change of mkeficapsule

2022-02-11T19:07:55Z

Since the syntax of mkeficapsule was changed in the previous commit, we need to modify command line arguments in a pytest script. Signed-off-by: AKASHI Takahiro Reviewed-by: Simon Glass

test/py: efi_capsule: add image authentication test

2022-02-11T19:07:55Z

Add a couple of test cases against capsule image authentication for capsule-on-disk, where only a signed capsule file with the verified signature will be applied to the system. Due to the difficulty of embedding a public key (esl file) in U-Boot binary during pytest setup time, all the keys/certificates are pre-created. Signed-off-by: AKASHI Takahiro Reviewed-by: Simon Glass Acked-by: Ilias Apalodimas

test/py: efi_capsule: align with efidebug syntax changes

2021-07-24T08:49:51Z

After the commit c70f44817d46 ("efi_loader: simplify 'printenv -e'"), "-all" option is no longer necessary. Just remove them in the test script. Fixes: c70f44817d46 ("efi_loader: simplify 'printenv -e'") Signed-off-by: AKASHI Takahiro Signed-off-by: Heinrich Schuchardt

test/py: Fix efidebug related tests

2021-04-24T04:53:40Z

commit cbea241e935e("efidebug: add multiple device path instances on Boot####") slightly tweaked the efidebug syntax adding -b, -i and -s for the boot image, initrd and optional data. The pytests using this command were adapted as well. However I completely missed the last "" argument, which at the time indicated the optional data and needed conversion as well. This patch is adding the missing -s flag and the tests are back to normal. Fixes: cbea241e935e("efidebug: add multiple device path instances on Boot####") Signed-off-by: Ilias Apalodimas Reviwed-by: Heinrich Schuchardt

test: test the ESRT creation

2021-03-25T19:19:42Z

This commit slightly extends test_efi_capsule_fw3. In order to run the test the following must be added to sandbox_defconfig: +CONFIG_CMD_SF=y +CONFIG_CMD_MEMORY=y +CONFIG_CMD_FAT=y +CONFIG_DFU=y The ESRT is printed in the u-boot shell by calling efidebug esrt. The test ensures that, after the capsule is installed, the ESRT contains entries with the GUIDs: - EFI_FIRMWARE_IMAGE_TYPE_UBOOT_FIT_GUID; - EFI_FIRMWARE_IMAGE_TYPE_UBOOT_RAW_GUID; test invocation: sudo ./test/py/test.py --bd sandbox -k capsule_fw3 -l --build CC: Heinrich Schuchardt CC: Sughosh Ganu CC: AKASHI Takahiro CC: Ilias Apalodimas CC: Andre Przywara CC: Alexander Graf CC: nd@arm.com Signed-off-by: Jose Marinho Reviewed-by: Heinrich Schuchardt

efidebug: add multiple device path instances on Boot####

2021-03-25T19:14:26Z

The UEFI spec allows a packed array of UEFI device paths in the FilePathList[] of an EFI_LOAD_OPTION. The first file path must describe the loaded image but the rest are OS specific. Previous patches parse the device path and try to use the second member of the array as an initrd. So let's modify efidebug slightly and install the second file described in the command line as the initrd device path. Signed-off-by: Ilias Apalodimas

efi_loader: correct uboot_bin_env.its file format

2021-03-07T16:37:26Z

Up to now the EFI capsule Python tests were always skipped. The reason is that mkimage fails with: uboot_bin_env.its:13.21-23.5: Warning (unit_address_vs_reg): /images/u-boot-bin@100000: node has a unit name, but no reg property uboot_bin_env.its:24.21-34.5: Warning (unit_address_vs_reg): /images/u-boot-env@150000: node has a unit name, but no reg property If a unit in a device-tree has an address, a reg property must be provided. But adding a reg property is not the solution here. Since 2017 unit addresses are disallowed for FIT, cf. common/image-fit.c:1624. So remove the unit addresses in uboot_bin_env.its. Signed-off-by: Heinrich Schuchardt