u-boot.git/test/py, branch v2018.07 Unnamed repository; edit this file 'description' to name the repository. test_avb: Add pymark.buildconfigspec information for the AVB tests 2018-06-19T15:55:06+00:00 Tom Rini trini@konsulko.com 2018-06-18T23:04:25+00:00 4e899d868d68de5faf3cd3091f052d7a4c3a7f38 Signed-off-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Tom Rini <trini@konsulko.com>
test/py: avb2.0: add tests for avb commands 2018-06-18T18:02:02+00:00 Igor Opaniuk igor.opaniuk@linaro.org 2018-06-03T18:56:42+00:00 f96c9482e6b87dd0a8574a031fc9115ede3305f5 1. Run AVB 2.0 full verification chain, avb verify 2. Check if 'avb get_uuid' works, compare results with 'part list mmc 1' output 3. Test `avb read` commands, which reads N bytes from a partition identified by a name Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> 
1. Run AVB 2.0 full verification chain, avb verify
2. Check if 'avb get_uuid' works, compare results with
'part list mmc 1' output
3. Test `avb read` commands, which reads N bytes from a partition
identified by a name

Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
tests: Make test_log.py tests depend on cmd_log not log 2018-05-31T12:53:11+00:00 Tom Rini trini@konsulko.com 2018-05-25T12:28:45+00:00 680a52c35088dc30a4ca18870ec89ff3e1ac0e52 While the tests in this testcase are for the log subsystem they are only able to be run if CONFIG_CMD_LOG is enabled as well as CONFIG_LOG, so update the buildconfigspec requirement. Signed-off-by: Tom Rini <trini@konsulko.com> 
While the tests in this testcase are for the log subsystem they are only
able to be run if CONFIG_CMD_LOG is enabled as well as CONFIG_LOG, so
update the buildconfigspec requirement.

Signed-off-by: Tom Rini <trini@konsulko.com>
test/py: add TPMv2.x test suite 2018-05-26T00:13:00+00:00 Miquel Raynal miquel.raynal@bootlin.com 2018-05-15T09:57:24+00:00 2dffe1c6adc0dfb1fdce8a32e88a95ddec9004a7 Add tests for the TPMv2.x commands. These commands may run both on a physical TPM and with the sandbox driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> 
Add tests for the TPMv2.x commands.
These commands may run both on a physical TPM and with the sandbox
driver.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07T13:34:12+00:00 Tom Rini trini@konsulko.com 2018-05-06T21:58:06+00:00 83d290c56fab2d38cd1ab4c4cc7099559c1d5046 When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
efi_selftest: check installation of the device tree 2018-04-04T09:00:06+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2018-03-03T14:29:04+00:00 06c3d5b989d15a86e2b0a5d49e0bcda365d35baa The unit test checks if a device tree is installed. It requires that the 'compatible' property of the root node exists. If available it prints the 'serial-number' property. The serial-number property is derived from the environment variable 'serial#'. This can be used to check if the image_setup_libfdt() function is executed. A Python test is supplied. It sets a value for serial# and checks that the selftest shows this as serial-number. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de> 
The unit test checks if a device tree is installed. It requires that the
'compatible' property of the root node exists. If available it prints the
'serial-number' property.

The serial-number property is derived from the environment variable
'serial#'. This can be used to check if the image_setup_libfdt() function
is executed.

A Python test is supplied. It sets a value for serial# and checks that the
selftest shows this as serial-number.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
test/py: add spi_flash tests 2018-03-22T20:32:20+00:00 Liam Beguin liambeguin@gmail.com 2018-03-14T23:15:16+00:00 7f9b50a27c10579cc87af8d3ef6a033cc8fe001a Add basic tests for the spi_flash subsystem. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> 
Add basic tests for the spi_flash subsystem.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
test/py: add generic CRC32 function 2018-03-22T17:25:20+00:00 Liam Beguin liambeguin@gmail.com 2018-03-14T23:15:15+00:00 c3342cd58f251f78fe02955c47b51f7bb94e87ba Add a generic function which can be used to compute the CRC32 value of a region of RAM. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> 
Add a generic function which can be used to compute the CRC32 value of
a region of RAM.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
test/py: do not import pytest multiple times 2018-03-22T17:25:20+00:00 Liam Beguin liambeguin@gmail.com 2018-03-14T23:15:14+00:00 64a2cebb6e664ad32757c9507140aa69ad7228d3 Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> 
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
test/py: README: add HOSTNAME to PYTHONPATH 2018-03-22T17:25:20+00:00 Liam Beguin liambeguin@gmail.com 2018-03-14T23:15:13+00:00 be91691d081359e7366e487df7894af63268333d As opposed to PATH, HOSTNAME is not appended to PYTHONPATH automatically. Lets add it to the examples to make it more obvious to new users. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> 
As opposed to PATH, HOSTNAME is not appended to PYTHONPATH
automatically. Lets add it to the examples to make it more
obvious to new users.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>