Recently pylint has started to complain about:
No name 'fs_helper' in module 'tests' (no-name-in-module)

Due to:
from tests import fs_helper

However, we have:
test/py/tests/fs_helper.py

And since we do not want to add a dummy test/py/tests/__init__.py to
silence this warning we instead just disable it as needed.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

bootX measurements and measurement API moved to u-boot core:

Up to now, U-Boot could perform measurements and EventLog creation as
described by the TCG spec when booting via EFI.

The EFI code was residing in lib/efi_loader/efi_tcg2.c and contained
both EFI specific code + the API needed to access the TPM, extend PCRs
and create an EventLog. The non-EFI part proved modular enough and
moving it around to the TPM subsystem was straightforward.

With that in place we can have a common API for measuring binaries
regardless of the boot command, EFI or boot(m|i|z), and contructing an
EventLog.

I've tested all of the EFI cases -- booting with an empty EventLog and
booting with a previous stage loader providing one and found no
regressions.  Eddie tested the bootX part.

Eddie also fixed the sandbox TPM which couldn't be used for the EFI code
and it now supports all the required capabilities. This had a slight
sideeffect in our testing since the EFI subsystem initializes the TPM
early and 'tpm2 init' failed during some python tests. That code only
opens the device though, so we can replace it with 'tpm2 autostart'
which doesn't error out and still allows you to perfom the rest of the
tests but doesn't report an error if the device is already opened.

There's a few minor issues with this PR as well but since testing and
verifying the changes takes a considerable amount of time, I prefer
merging it now.

Heinrich has already sent a PR for -master containing "efi_loader: fix
EFI_ENTRY point on get_active_pcr_banks" and I am not sure if that will
cause any conflicts, but in any case they should be trivial to resolve.

Both the EFI and non-EFI code have a Kconfig for measuring the loaded
Device Tree.  The reason this is optional is that we can't reason
when/if devices add random info like kaslr-seed, mac addresses etc in
the DT. In that case measurements are random, board specific and
eventually useless.  The reason it was difficult to fix it prior to this
patchset is because the EFI subsystem and thus measurements was brought
up late and DT fixups might have already been applied. With this
patchset we can measure the DT really early in the future.

Heinrich also pointed out that the two Kconfigs for the DTB measurements
can be squashed in a single one and that the documentation only explains
the non-EFI case.  I agree on both but as I said this is a sane working
version, so let's pull this first it's aleady big enough and painful to
test.

commit 789ed2784256 ("test/py: replace 'tpm2 init, startup, selftest' sequences")
changed some of the tpm2 init sequences to 'tpm2 autostart' instead of
calling 'tpm init', 'tpm startup TPM2_SU_CLEAR', 'tpm2 self_test full'.

The autostart command calls the afforementioned sequence and on top of
that deals with the 'tpm2 init' return codes if the tpm is already
started. Since we initialize the tpm from various subsystems now,
replace the last remaining instances of 'tpm2 init' with 'tpm2
autostart'.  Since the latter calls 'tpm2 init' anyway we will still be
implicitly testing the validity of that command

It's worth noting that since 'tpm2 autostart' performs the startup and
self tests sequences of the tpm we could drop
'test_tpm2_sandbox_self_test_full' and 'test_tpm2_startup, but let's
keep the since they test tpm commands and options

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

We currently use PCR 0 for testing the PCR read/extend functionality in
our selftests.  How ever those PCRs are defined by the TCG spec for
platform use.  For example if the tests run *after* the efi subsystem
initialization, which extends PCRs 0 & 7 it will give a false positive.

So let's switch over to a PCR which is more suitable and is defined for
OS use.  It's worth noting that we are using PCR10 here, since PCR9 is
used internally by U-Boot if we choose to measure the loaded DTB

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

Current code allows up to 3 MBR partitions without extended one.
If more than 3 partitions are required, then extended partition(s)
must be used.
This commit allows up to 4 primary MBR partitions without the
need for extended partition.

Add mbr test unit. In order to run the test manually, mmc6.img file
of size 12 MiB or greater is required in the same directory as u-boot.
Test also runs automatically via ./test/py/test.py tool.
Running mbr test is only supported in sandbox mode.

Signed-off-by: Alex Gendin <agendin@matrox.com>
[ And due to some further changes for testing ]
Signed-off-by: Simon Glass <sjg@chromium.org>

Add test for the SPI load method. This one is pretty straightforward. We
can't enable FIT_EXTERNAL with LOAD_FIT_FULL because spl_spi_load_image
doesn't know the total image size and has to guess from fdt_totalsize. This
doesn't include external data, so loading it will fail.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Xilinx changes for v2024.01-rc1 v3

clk:
- remove additional compatible strings for Versal NET

net:
- zynq_gem: Fix clock calculation for MDC for higher frequencies

pinctrl:
- core: Extend pinmux status buffere size
- zynqmp driver: Show also tristate configuration

test:
- add test case for pxe get

Xilinx:
- describe SelectMAP boot mode

Zynq:
- Fix nand description in DT

ZynqMP:
- DTS sync patches with kernel and also W=1 related fixes
- Add support for KD240, zcu670, e-a2197 with x-prc cards, SC revB/C with i2c
  description for other SC based boards
- k24 psu_init cleanup

Execute the 'pxe get' command to download a pxe configuration file from
the TFTP server and validate its interpretation.

Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Link: https://lore.kernel.org/r/b5d263cf61282b158052ba87bde1fb4a227c0bb7.1696338593.git.love.kumar@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

Execute "time <sleep cmd>", and validate that it gives the approximately
the correct amount of command execution time.

Signed-off-by: Love Kumar <love.kumar@amd.com>

U-Boot should set up the SMBIOS tables during startup, as it does on x86.
Ensure that it does this correctly on non-x86 machines too, by creating
an event spy for last-stage init.

Tidy up the installation-condition code while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>