u-boot.git/tools/binman/missing-blob-help, branch v2024.01

binman: Update tee-os missing blob help text

2023-08-02T18:05:57+00:00

Make it a little bit more clear that it is U-Boot that should be built
with TEE=/path/to/tee.bin and not OP-TEE itself.

Signed-off-by: Jonas Karlman 
Reviewed-by: Simon Glass

arm: dts: iot2050: Optionally embed OTP programming data into image

2023-03-29T15:58:26+00:00

Use external blob otpcmd.bin to replace the 0xff filled OTP programming
command block to create a firmware image that provisions the OTP on
first boot. This otpcmd.bin is generated from the customer keys using
steps described in the meta-iot2050 integration layer for the device.

Based on original patch by Baocheng Su.

Signed-off-by: Jan Kiszka

iot2050: Update firmware layout

2023-03-29T15:58:26+00:00

The latest version of the binary-only firmware parts come in a combined
form of FSBL and sysfw containers. This implies some layout changes to
the generated firmware image but also makes handling of artifacts much
simpler (4 files less). The env locations will not change, just the
space reserved for U-Boot will shrink from 4 to 3 MB - still plenty of
space left in practice.

Adjust configuration and documentation accordingly.

Along this change, add a new reservation for update commands of the
user-controlled OTP part. A specific userspace tool will fill it, and
the FSBL will evaluate it during boot. This reservation will use 64K of
the former sysfw section.

Signed-off-by: Jan Kiszka

binman: Add support for a rockchip-tpl entry

2023-02-28T10:07:26+00:00

The rockchip-tpl entry can be used when an external TPL binary should be
used instead of the normal U-Boot TPL.

Signed-off-by: Jonas Karlman 
Reviewed-by: Simon Glass 
Reviewed-by: Kever Yang 
Tested-by: Eugen Hristev

riscv: binman: Add help message for missing blobs

2023-02-17T11:07:48+00:00

Add the 'missing-msg' for more detailed output
on missing system firmware.

Signed-off-by: Rick Chen 
Reviewed-by: Leo Yu-Chi Liang 
Reviewed-by: Yu Chien Peter Lin

binman: Add support for TEE BL32

2022-02-22T17:05:44+00:00

Add an entry for OP-TEE Trusted OS 'BL32' payload.
This is required by platforms using Cortex-A cores with TrustZone
technology.

Signed-off-by: Roger Quadros 
Reviewed-by: Simon Glass 
Add missing-blob-help, renumber the test file, update entry-docs:
Signed-off-by: Simon Glass

iot2050: binman: add missing-msg for blobs

2021-12-17T16:44:59+00:00

Add the 'missing-msg' for blobs for more detailed output on missing system
firmware and SEBoot blobs.

Signed-off-by: Ivan Mikhaylov 
Reviewed-by: Simon Glass 
Fix minor typos:
Signed-off-by: Simon Glass

iot2050: Enable watchdog support, but do not auto-start it

2021-10-03T18:40:56+00:00

This allows to use the watchdog in custom scripts but does not enforce
that the OS has to support it as well.

Signed-off-by: Jan Kiszka

sunxi: binman: Add support for including SCP firmware

2020-10-22T06:13:43+00:00

Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a
System Control Processor, or SCP. ARM Trusted Firmware (ATF)
communicates with the SCP over SCPI to implement the PSCI system
suspend, shutdown and reset functionality. Currently, SCP firmware is
optional; the system will boot and run without it, but system suspend
will be unavailable.

Since all communication with the SCP is mediated by ATF, the only thing
U-Boot needs to do is load the firmware into SRAM. The SCP firmware
occupies the last 16KiB of SRAM A2, immediately following ATF.

Reviewed-by: Simon Glass 
Signed-off-by: Samuel Holland 
Reviewed-by: Jagan Teki

binman: sunxi: Add help message for missing sunxi ATF BL31

2020-09-22T18:54:13+00:00

Add a special help message pointing to the relevant README.

Signed-off-by: Simon Glass