u-boot.git/tools/mxsboot.c, branch v2016.01

mxs: mxsboot: fix endianess for sd boot images

2015-09-13T08:19:40+00:00

Running mxsboot on a big-endian system produces a sd image which
cannot be started by the i.MX28 ROM. It complains on the debug
uart as following:
0x8020a009
          0x80502008
0x8020a009
          0x80502008
...

Enforcing all fields within the BCB to little-endian make
the image bootable again.

Signed-off-by: Michael Heimpold 
Acked-by: Stefano Babic 
Acked-by: Marek Vasut

tools: mxsboot: calculate ECC block level dynamically

2015-09-02T13:26:11+00:00

For pages of 2048 bytes the current setting of the ECC Error Correction Level
is only true for an oob size of 64 bytes and wrong for all others.

Instead of hard-coding every possible combination of page size and oob size use
the dynamic calculation of the ECC strength introduced in commit
6121560d7714d6d8e41ce1687a1388a1a8fea4cb.

Cc: Marek Vasut 
Signed-off-by: Jörg Krause 
Acked-by: Marek Vasut 
Reviewed-by: Stefano Babic

tools: mxsboot: Calculate ECC strength dynamically

2015-05-24T19:26:54+00:00

Calculating the ECC strength dynamically to be aligned with the mxs NAND
driver and the Linux Kernel.

Signed-off-by: Jörg Krause 
Reviewed-by: Marek Vasut

mtd: nand: mxs: Replace magic number for bits per ECC level with macro

2015-05-24T19:26:54+00:00

Signed-off-by: Jörg Krause 
Reviewed-by: Marek Vasut

mxsboot : Support of 224-bytes OOB area length

2015-01-19T08:10:52+00:00

Add support for the NAND Flash chip with page size of 4096+224-bytes OOB area length

For example Micron MT29F4G08 NAND flash device defines a OOB area which is
224 bytes long (oobsize).

Signed-off-by: Alexandre Coffignal

tools: mxsboot: Mark the FCB pages as valid

2013-09-10T17:12:54+00:00

Without this marker, Linux will complain that the NAND pages with
FCB are invalid.

Signed-off-by: Marek Vasut 
Cc: Fabio Estevam 
Cc: Stefano Babic

tools: mxsboot: Staticize functions

2013-08-31T13:28:11+00:00

Make remaining non-static functions static and the same for vars.

Signed-off-by: Marek Vasut 
Cc: Fabio Estevam 
Cc: Stefano Babic

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

mxs: mxsboot: Move sdcard BCB header to 4 sectors offset

2013-04-26T07:16:48+00:00

The MX23 Boot ROM does blindly load from 2048 offset while the MX28
does parse the BCB header to known where to load the image from. We
move the BCB header to 4 sectors offset so same code can be used by
both SoCs avoiding code duplication.

This idea was given by Marek Vasut 

Signed-off-by: Otavio Salvador 
Tested-by: Fabio Estevam 
Tested-by: Marek Vasut

mxsboot: fix tool name in usage message

2012-03-17T20:38:03+00:00

Signed-off-by: Otavio Salvador