u-boot.git/tools/socfpgaimage.c, branch master

tools: imagetool: Extend print_header() by params argument

2023-04-13T09:34:47+00:00

This allows image type print_header() callback to access struct
image_tool_params *params.

Signed-off-by: Pali Rohár 
Reviewed-by: Simon Glass

tools: socfpgaimage: update padding flow

2021-01-15T09:48:39+00:00

The existing socfpgaimage always pads the image to the maximum size of
OCRAM size. This will break in the encryption flow where it expects the
image to be un-padded. The encryption tool will do the encryption for
the whole image and append the signature key at end of the image.
The signature key will append to beyond the size of OCRAM if the image
is padded with the maximum size before encryption.

Move the padding step from socfpgaimage to Makefile and pads with objcopy
command.

socfpgaimage will pad the image with 16 bytes aligned (including CRC word),
this is a requirement in encryption flow.

Signed-off-by: Ley Foon Tan

tools: socfpgaimage: Print image header information

2021-01-15T09:48:39+00:00

Print image header information if the header is verified.

Example output from mkimage "-l" option:

$ ./tools/mkimage -l spl/u-boot-spl.sfp
Image Type      : Cyclone V / Arria V SoC Image
Validation word : 0x31305341
Version         : 0x00000000
Flags           : 0x00000000
Program length  : 0x00003a59
Header checksum : 0x00000188

$ ./tools/mkimage -l spl/u-boot-spl.sfp
Image Type      : Arria 10 SoC Image
Validation word : 0x31305341
Version         : 0x00000001
Flags           : 0x00000000
Header length   : 0x00000014
Program length  : 0x000138e0
Program entry   : 0x00000014
Header checksum : 0x00000237

Signed-off-by: Ley Foon Tan

tools: socfpgaimage: Add param entry point (ep) support for Arria 10 (v1)

2020-10-09T09:53:16+00:00

Add param entry point (ep) support for Arria 10 header. User can pass in
'e' option to mkimage to set the entry point. This is an optional option.

If not specified, default is 0x14.

Signed-off-by: Ley Foon Tan

tools: socfpgaimage: Add check params function for Arria 10 (v1)

2020-10-09T09:53:15+00:00

Add check params function for Arria 10 (header v1).

From [1] page 42, entry point offset should be 4 bytes aligned and
any value smaller than 0x14 is invalid.

Rename existing socfpgaimage_check_params() for v0.

[1]: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_soc_eds.pdf

Signed-off-by: Ley Foon Tan

tool: use ALIGN() to align the size

2020-04-24T14:10:00+00:00

Use the ALIGN() for size align so that the code is more readable.

Signed-off-by: Kever Yang 
Reviewed-by: Punit Agrawal 
Reviewed-by: Tom Rini 
Reviewed-by: Heinrich Schuchardt

crc32: Use the crc.h header for crc functions

2019-12-02T23:23:08+00:00

Drop inclusion of crc.h in common.h and use the correct header directly
instead.

With this we can drop the conflicting definition in fw_env.h and rely on
the crc.h header, which is already included.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

tools: socfpga: fix sfp_verify_header

2018-10-03T10:56:50+00:00

Fix sfp_verify_header to return correct version number.
This fixes "Not a sane SOCFPGA preloader" error message with v1 header.

Signed-off-by: Atsushi Nemoto

tools: socfpga: Add SFP image V1 support

2018-05-08T19:08:42+00:00

Add support for the SoCFPGA header v1 , which is used on Arria 10.
Thus far the mkimage-socfpga image only supported header format v0
used on Cyclone V and Arria V, but is not supported on Arria 10.
The layout of the v0 and v1 header is similar, yet there are a few
differences, see the patch body for details.

Signed-off-by: Marek Vasut 
Cc: Dinh Nguyen 
Cc: Chin Liang See

tools: socfpga: Stop using global struct socfpga_image

2018-05-08T19:08:42+00:00

The structure is passed around correctly, create local instances
where necessary and zap the global struct socfpga_image instance.

Signed-off-by: Marek Vasut 
Cc: Dinh Nguyen 
Cc: Chin Liang See