u-boot.git/tools, branch v2015.10-rc3

Merge git://git.denx.de/u-boot-rockchip

2015-09-03T18:57:09+00:00

rockchip: Drop first 32kb of zeros from the rkSD image type

2015-09-03T03:28:25+00:00

Instead of creating a rockchip SPL SD card image with 32KB of zeros
which can be written to the start of an SD card, create the images with
only the useful data that should be written to an offset of 32KB on the
SD card.

The first 32 kilobytes aren't needed for bootup and only serve as
convenient way of accidentally obliterating your partition table.

Signed-off-by: Sjoerd Simons 
Acked-by: Simon Glass 
Signed-off-by: Simon Glass

rockchip: Add support for the SPI image

2015-09-03T03:28:23+00:00

The Rockchip boot ROM requires a particular file format for booting from SPI.
It consists of a 512-byte header encoded with RC4, some padding and then up
to 32KB of executable code in 2KB blocks, separated by 2KB empty blocks.

Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be
converted to this format. This allows booting from SPI flash on supported
machines.

Signed-off-by: Simon Glass

rockchip: Add support for the SD image

2015-09-03T03:28:23+00:00

The Rockchip boot ROM requires a particular file format. It consists of
64KB of zeroes, a 512-byte header encoded with RC4, and then some executable
code.

Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be
converted to this format.

Signed-off-by: Simon Glass

rockchip: Add the rkimage format to mkimage

2015-09-03T03:28:23+00:00

Rockchip SoCs require certain formats for code that they execute, The
simplest format is a 4-byte header at the start of a binary file. Add
support for this so that we can create images that the boot ROM understands.

Signed-off-by: Simon Glass

mkimage: Allow the original file size to be recorded

2015-09-03T03:28:23+00:00

Allow the image handler to store the original input file size so that it
can reference it later.

Signed-off-by: Simon Glass 
Reviewed-by: Joe Hershberger

mkimage: Allow padding to any length

2015-09-03T03:28:23+00:00

At present there is an arbitrary limit of 4KB for padding. Rockchip needs
more than that, so remove this restriction.

Signed-off-by: Simon Glass 
Reviewed-by: Joe Hershberger

tools: mxsboot: calculate ECC block level dynamically

2015-09-02T13:26:11+00:00

For pages of 2048 bytes the current setting of the ECC Error Correction Level
is only true for an oob size of 64 bytes and wrong for all others.

Instead of hard-coding every possible combination of page size and oob size use
the dynamic calculation of the ECC strength introduced in commit
6121560d7714d6d8e41ce1687a1388a1a8fea4cb.

Cc: Marek Vasut 
Signed-off-by: Jörg Krause 
Acked-by: Marek Vasut 
Reviewed-by: Stefano Babic

tools/imximage: set DCD pointer to NULL when its length is 0

2015-09-02T13:25:27+00:00

When dcd_len is 0 the Write Data command that the set_dcd_rst_v2() routine
generates is empty. This causes HAB to complain that the command is invalid.

--------- HAB Event 1 -----------------
event data:
	0xdb 0x00 0x0c 0x41 0x33 0x06 0xc0 0x00
	0xcc 0x00 0x04 0x04

To fix this set the DCD pointer in the IVT to NULL in this case. The DCD header
itself is still needed for detect_imximage_version() to determine the image
version.

Signed-off-by: Baruch Siach 
Acked-by: Stefano Babic

buildman: Correct 'Series-cover-cc' detection logic

2015-08-31T13:57:26+00:00

This requires 'Series-cover_cc' at present which is incorrect. Fix it.

Signed-off-by: Simon Glass