u-boot.git/tools, branch v2017.01-rc1

buildman: Rename do_build to config_only

2016-12-03T03:53:18+00:00

This variable name is needlessly confusion. Adjust it to use a 'positive'
name instead.

Signed-off-by: Simon Glass

buildman: Clean up odd characters on the terminal

2016-12-02T17:37:47+00:00

At present buildman leaves behind a few characters during its progress
updates, which looks odd. Fix it.

Signed-off-by: Simon Glass

buildman: Squash useless output from -K

2016-12-02T17:37:47+00:00

When using #define CONFIG_SOME_OPTION, the value it set to '1'. When using
defconfig (i.e. CONFIG_SOME_OPTION=y) the value is set to 'y'. This results
in differences showing up with -K. These differences are seldom useful.

Adjust buildman to suppress these differences by default.

Signed-off-by: Simon Glass

buildman: Add documentation for CONFIG checking

2016-12-02T17:37:47+00:00

The -K option is not mentioned in the README at present. Add some notes
to describe how this is used.

Signed-off-by: Simon Glass

buildman: Add an option to just create the config

2016-12-02T17:37:47+00:00

Normally buildman does a full build of a board. This includes creating the
u-boot.cfg file which contains all the configuration options. Buildman uses
this file with the -K option, to show differences in effective configuration
for each commit.

Doing a full build of U-Boot just to create the u-boot.cfg file is wasteful.
Add a -D option which causes buildman to only create the configuration. This
is enough to support use of -K and can be done much more quickly (typically
5-10 times faster).

Signed-off-by: Simon Glass

tools/kwbimage: add DEBUG option

2016-12-01T08:10:49+00:00

Offset 0x1 in the generated kwb image file is a set of flags, bit 0
enables debug output from the BootROM firmware.  Allow a DEBUG option in
the kwb configuration to request debug output from the BootROM firmware.

Signed-off-by: Chris Packham 
Signed-off-by: Stefan Roese

tools/kwbimage: add BAUDRATE option

2016-12-01T08:10:43+00:00

Offset 0x18 in some Marvell datasheets this field is redacted as
"reserved". This offset is actually a set of options and bits 2:0 allow
the selection of the UART baudrate.

Allow a BAUDRATE option to set the UART baudrate for any messages coming
from the BootROM firmware.

Signed-off-by: Chris Packham 
Signed-off-by: Stefan Roese

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2016-11-30T14:57:52+00:00

Merge git://git.denx.de/u-boot-mpc85xx

2016-11-30T00:42:48+00:00

tools: imximage: display DCD block offset, length

2016-11-29T15:37:37+00:00

These values can be used to sign a U-Boot image for use when
loading an image through the Serial Download Protocol (SDP).

Note that the address of 0x910000 is usable with the stock
configuration of imx_usb_loader on i.MX6 and i.MX7 SOCs:

https://github.com/boundarydevices/imx_usb_loader/blob/master/mx6_usb_work.conf#L3

Refer to the section on imx_usb_loader in this post for more
details:

https://boundarydevices.com/high-assurance-boot-hab-dummies/

Signed-off-by: Eric Nelson