u-boot.git/tools, branch v2017.01-rc2 Unnamed repository; edit this file 'description' to name the repository. tools: mxsimage: Fix build with OpenSSL 1.1.x 2016-12-19T17:26:39+00:00 Marek Vasut marex@denx.de 2016-12-19T14:27:50+00:00 7bae13b7579a6bc42330427496330fe2a29cbd56 The EVP_MD_CTX and EVP_CIPHER_CTX are made opaque since 1.1.x , so instead of embedding them directly into struct sb_image_ctx and initializing them using EVP_*_CTX_init(), we use pointers and allocate the crypto contexts using EVP_*_CTX_new(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> 
The EVP_MD_CTX and EVP_CIPHER_CTX are made opaque since 1.1.x , so instead
of embedding them directly into struct sb_image_ctx and initializing them
using EVP_*_CTX_init(), we use pointers and allocate the crypto contexts
using EVP_*_CTX_new().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
imx6: icorem6: Add custom splashscreen support 2016-12-16T16:15:27+00:00 Jagan Teki jagan@amarulasolutions.com 2016-12-05T23:00:56+00:00 3713571cb748964dcba87675fe202036127da5de Add custom splashscreen, engicam.bmp support for Engicam i.CoreM6 qdl board. Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> 
Add custom splashscreen, engicam.bmp support for
Engicam i.CoreM6 qdl board.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
tools: mkimage: Use fstat instead of stat to avoid malicious hacks 2016-12-09T13:40:23+00:00 Michal Simek michal.simek@xilinx.com 2016-12-06T16:17:01+00:00 ebe0f53f48e8f9ecc823e533a85b05c13638c350 The patch is fixing: "tools: mkimage: Check if file is regular file" (sha1: 56c7e8015509312240b1ee15f2ff74510939a45d) which contains two issues reported by Coverity Unchecked return value from stat and incorrect calling sequence where attack can happen between calling stat and fopen. Using pair in opposite order (fopen and fstat) is fixing this issue because fstat is using the same file descriptor (FILE *). Also fixing issue with: "tools: mkimage: Add support for initialization table for Zynq and ZynqMP" (sha1: 3b6460809c2a28360029c1c48247648fac4455c9) where file wasn't checked that it is regular file. Reported-by: Coverity (CID: 154711, 154712) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> 
The patch is fixing:
"tools: mkimage: Check if file is regular file"
(sha1: 56c7e8015509312240b1ee15f2ff74510939a45d)
which contains two issues reported by Coverity
Unchecked return value from stat and incorrect calling sequence where
attack can happen between calling stat and fopen.
Using pair in opposite order (fopen and fstat) is fixing this issue
because fstat is using the same file descriptor (FILE *).

Also fixing issue with:
"tools: mkimage: Add support for initialization table for Zynq and
ZynqMP" (sha1: 3b6460809c2a28360029c1c48247648fac4455c9)
where file wasn't checked that it is regular file.

Reported-by: Coverity (CID: 154711, 154712)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze" 2016-12-09T12:56:54+00:00 Tom Rini trini@konsulko.com 2016-12-09T12:56:54+00:00 361a879902a3cbdb692149a1ac580e3199e771ba This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533. 
This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing
changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.
tools: mkimage: Use fstat instead of stat to avoid malicious hacks 2016-12-08T08:23:48+00:00 Michal Simek michal.simek@xilinx.com 2016-12-06T15:38:13+00:00 37a2cf6f1af0379c447ec4b6e321a3600492484c The patch is fixing: "tools: mkimage: Check if file is regular file" (sha1: 56c7e8015509312240b1ee15f2ff74510939a45d) which contains two issues reported by Coverity Unchecked return value from stat and incorrect calling sequence where attack can happen between calling stat and fopen. Using pair in opposite order (fopen and fstat) is fixing this issue because fstat is using the same file descriptor (FILE *). Also fixing issue with: "tools: mkimage: Add support for initialization table for Zynq and ZynqMP" (sha1: 3b6460809c2a28360029c1c48247648fac4455c9) where file wasn't checked that it is regular file. Reported-by: Coverity (CID: 154711, 154712) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Series-to: trini Series-cc: u-boot 
The patch is fixing:
"tools: mkimage: Check if file is regular file"
(sha1: 56c7e8015509312240b1ee15f2ff74510939a45d)
which contains two issues reported by Coverity
Unchecked return value from stat and incorrect calling sequence where
attack can happen between calling stat and fopen.
Using pair in opposite order (fopen and fstat) is fixing this issue
because fstat is using the same file descriptor (FILE *).

Also fixing issue with:
"tools: mkimage: Add support for initialization table for Zynq and
ZynqMP" (sha1: 3b6460809c2a28360029c1c48247648fac4455c9)
where file wasn't checked that it is regular file.

Reported-by: Coverity (CID: 154711, 154712)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Series-to: trini
Series-cc: u-boot
buildman: Rename do_build to config_only 2016-12-03T03:53:18+00:00 Simon Glass sjg@chromium.org 2016-11-16T21:09:25+00:00 a9401b2bc93a750d1566174b18d23bcdc2a45b7b This variable name is needlessly confusion. Adjust it to use a 'positive' name instead. Signed-off-by: Simon Glass <sjg@chromium.org> 
This variable name is needlessly confusion. Adjust it to use a 'positive'
name instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
buildman: Clean up odd characters on the terminal 2016-12-02T17:37:47+00:00 Simon Glass sjg@chromium.org 2016-11-15T22:32:59+00:00 960421ecb3db9220609b6f1dbcb9f972dbca9975 At present buildman leaves behind a few characters during its progress updates, which looks odd. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> 
At present buildman leaves behind a few characters during its progress
updates, which looks odd. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
buildman: Squash useless output from -K 2016-12-02T17:37:47+00:00 Simon Glass sjg@chromium.org 2016-11-13T21:25:53+00:00 b464f8e7ded33dc3f3c26dd905e1fa9807dd7526 When using #define CONFIG_SOME_OPTION, the value it set to '1'. When using defconfig (i.e. CONFIG_SOME_OPTION=y) the value is set to 'y'. This results in differences showing up with -K. These differences are seldom useful. Adjust buildman to suppress these differences by default. Signed-off-by: Simon Glass <sjg@chromium.org> 
When using #define CONFIG_SOME_OPTION, the value it set to '1'. When using
defconfig (i.e. CONFIG_SOME_OPTION=y) the value is set to 'y'. This results
in differences showing up with -K. These differences are seldom useful.

Adjust buildman to suppress these differences by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
buildman: Add documentation for CONFIG checking 2016-12-02T17:37:47+00:00 Simon Glass sjg@chromium.org 2016-11-13T21:25:52+00:00 94d2ebe5bcbbbd15e879ee2204e037f321d66b68 The -K option is not mentioned in the README at present. Add some notes to describe how this is used. Signed-off-by: Simon Glass <sjg@chromium.org> 
The -K option is not mentioned in the README at present. Add some notes
to describe how this is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
buildman: Add an option to just create the config 2016-12-02T17:37:47+00:00 Simon Glass sjg@chromium.org 2016-11-13T21:25:51+00:00 b50113f373a95d28cf001eb20adc6ef56f8ba14c Normally buildman does a full build of a board. This includes creating the u-boot.cfg file which contains all the configuration options. Buildman uses this file with the -K option, to show differences in effective configuration for each commit. Doing a full build of U-Boot just to create the u-boot.cfg file is wasteful. Add a -D option which causes buildman to only create the configuration. This is enough to support use of -K and can be done much more quickly (typically 5-10 times faster). Signed-off-by: Simon Glass <sjg@chromium.org> 
Normally buildman does a full build of a board. This includes creating the
u-boot.cfg file which contains all the configuration options. Buildman uses
this file with the -K option, to show differences in effective configuration
for each commit.

Doing a full build of U-Boot just to create the u-boot.cfg file is wasteful.
Add a -D option which causes buildman to only create the configuration. This
is enough to support use of -K and can be done much more quickly (typically
5-10 times faster).

Signed-off-by: Simon Glass <sjg@chromium.org>