u-boot.git/tools, branch v2018.01-rc1

libfdt: migrate fdt_wip.c to a wrapper of scripts/dtc/libfdt/fdt_wip.c

2017-12-04T14:59:02+00:00

Now, lib/libfdt/fdt_wip.c is the same as scripts/dtc/libfdt/fdt_wip.c

Change the former to a wrapper of the latter.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Simon Glass

tools: env: Add support for direct read/write UBI volumes

2017-11-30T03:30:50+00:00

Up to now we were able to read/write environment data from/to UBI
volumes only indirectly by gluebi driver. This driver creates NAND MTD
on top of UBI volumes, which is quite a workaroung for this use case.

Add support for direct read/write UBI volumes in order to not use
obsolete gluebi driver.

Forward-ported from this patch:
http://patchwork.ozlabs.org/patch/619305/

Original patch:
Signed-off-by: Marcin Niestroj 

Forward port:
Signed-off-by: S. Lockwood-Childs

tools: zynqmpimage: adjust ug1085 reference to v1.4 of the document

2017-11-29T07:02:40+00:00

The chapter in which the table explaining the image format changed
chapter as the document evolved. This should help people track the
info down faster.

Signed-off-by: Jean-Francois Dagenais 
Signed-off-by: Michal Simek

tools: mkimage: Extend mkimage to also include pmufw

2017-11-28T15:08:57+00:00

The patch is adding external pmufw "Platform Management Unit firmware"
to boot.bin image. Boot.bin is a Xilinx format which bootrom is capable
to read and boot the system. pmufw is copied to the header data section
follows by u-boot-spl.bin. pmufw is consumed by PMU unit (Microblaze)
and SPL runs on a53-0.

This is generated command line when PMUFW_INIT_FILE is setup.

./tools/mkimage -T zynqmpimage -R ./"" -n
./"board/xilinx/zynqmp/pmufw.bin" -d spl/u-boot-spl.bin spl/boot.bin

Signed-off-by: Michal Simek 
Reviewed-by: Simon Glass

Merge git://git.denx.de/u-boot-dm

2017-11-24T03:48:35+00:00

binman: Return non-zero exit code on test failure

2017-11-23T01:05:38+00:00

Return exit code 1 when test fail so that callers can detect this.

Signed-off-by: Simon Glass

binman: Add add test for using an Intel MRC binary

2017-11-23T01:05:38+00:00

MRC (Memory Reference Code) is a binary blob used to set up the SDRAM
controller on some Intel boards. Add a test for this feature.

With this test coverage on binman is back up to 100%.

Signed-off-by: Simon Glass

binman: Add add test for SPL with a microcode pointer

2017-11-23T01:05:38+00:00

Add a test for this feature. It allows SPL to hold a pointer to the
microcode block. This is used for 64-bit U-Boot on x86.

Signed-off-by: Simon Glass

binman: Add a test for x86-start16-spl

2017-11-23T01:05:38+00:00

This allows us to put the 16-bit x86 start-up code in SPL. Add a test for
it.

Signed-off-by: Simon Glass

binman: Add test for u-boot-spl-bss-pad

2017-11-23T01:05:38+00:00

Add a test that we can pad the BSS with zero bytes.

Signed-off-by: Simon Glass