arm: mach-k3: arm64-mmu: add mapping for PCIe 4 GB Address Windows

The PCIe Controllers in the K3 SoCs have 4 GB Address Windows in the
64-bit address space to map System (CPU) Addresses to PCIe Bus Addresses.
The physical addresses for these Address Windows across PCIe instances
across SoCs is as follows:

+--------+----------------+----------------+----------------+----------------+
| SoC    | PCIe0          | PCIe1          | PCIe2          | PCIe3          |
+--------+----------------+----------------+----------------+----------------+
| AM64   | 0x6_0000_0000  | NA             | NA             | NA             |
| J722S  | 0x6_0000_0000  | NA             | NA             | NA             |
| AM68   | NA             | 0x41_0000_0000 | NA             | NA             |
| J7200  | NA             | 0x41_0000_0000 | NA             | NA             |
| J721S2 | NA             | 0x41_0000_0000 | NA             | NA             |
| J742S2 | 0x40_0000_0000 | 0x41_0000_0000 | NA             | NA             |
| AM69   | 0x40_0000_0000 | 0x41_0000_0000 | 0x42_0000_0000 | 0x43_0000_0000 |
| J721E  | 0x40_0000_0000 | 0x41_0000_0000 | 0x42_0000_0000 | 0x43_0000_0000 |
| J784S4 | 0x40_0000_0000 | 0x41_0000_0000 | 0x42_0000_0000 | 0x43_0000_0000 |
+--------+----------------+----------------+----------------+----------------+

Two regions for a 1:1 mapping from virtual addresses to physical addresses
catering to all of the above will be required, which are:
1. For AM64 and J722S SoCs
=> Start: 0x6_0000_0000 Size: 0x1_0000_0000
2. For AM68, AM69, J7200, J721E, J721S2, J742S2 and J784S4 SoCs
=> Start: 0x40_0000_0000 Size: 0x4_0000_0000

Since the 'Flash Peripherals' region from 0x5_0000_0000 to 0x8_7FFF_FFFF
includes the mapping for AM64 and J722S SoCs, only the second region
mentioned above needs to be added.

Hence, add the region to support 64-bit address space for PCIe.

Signed-off-by: Siddharth Vadapalli <[email protected]>
Fixes: 79f3e77133bd ("Subtree merge tag 'v6.16-dts' of dts repo [1] into dts/upstream")

2 files changed, 23 insertions, 4 deletions

diff --git a/arch/arm/mach-k3/arm64/arm64-mmu.c b/arch/arm/mach-k3/arm64/arm64-mmu.c
index f999af143fb..e032755db0d 100644
--- a/arch/arm/mach-k3/arm64/arm64-mmu.c
+++ b/arch/arm/mach-k3/arm64/arm64-mmu.c
@@ -29,6 +29,22 @@ struct mm_region k3_mem_map[K3_MEM_MAP_LEN] = {
 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, { /*
+	      * PCIe 4 GB Address Window for AM64 and J722S SoCs starts
+	      * from 0x6_0000_0000 and has a size of 0x1_0000_0000.
+	      * Since this is already enabled by the 'Flash Peripherals'
+	      * region above, we don't need to add it again.
+	      *
+	      * The PCIe 4 GB Address Windows for AM68, AM69, J7200, J721E,
+	      * J721S2, J742S2 and J784S4 SoCs are enabled by the following
+	      * region.
+	      */
+		.virt = 0x4000000000UL,
+		.phys = 0x4000000000UL,
+		.size = 0x400000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	}, [K3_MEM_MAP_FIRST_BANK_IDX] = { /* First DRAM Bank of size 2G */
 		.virt = CFG_SYS_SDRAM_BASE,
 		.phys = CFG_SYS_SDRAM_BASE,
diff --git a/arch/arm/mach-k3/include/mach/k3-ddr.h b/arch/arm/mach-k3/include/mach/k3-ddr.h
index 207e60b2763..6ac7f682fb8 100644
--- a/arch/arm/mach-k3/include/mach/k3-ddr.h
+++ b/arch/arm/mach-k3/include/mach/k3-ddr.h
@@ -8,11 +8,14 @@
 
 #include <spl.h>
 
-/* We need 3 extra entries for:
- *   SoC peripherals, flash and the sentinel value.
+/* We need 4 extra entries for:
+ * 1. SoC peripherals
+ * 2. Flash
+ * 3. PCIe 4GB Windows for AM68, AM69, J7200, J721E, J721S2, J742S2 and J784S4 SoCs
+ * 4. Sentinel value
  */
-#define K3_MEM_MAP_LEN			((CONFIG_NR_DRAM_BANKS) + 3)
-#define K3_MEM_MAP_FIRST_BANK_IDX	2
+#define K3_MEM_MAP_LEN			((CONFIG_NR_DRAM_BANKS) + 4)
+#define K3_MEM_MAP_FIRST_BANK_IDX	3
 
 int dram_init(void);
 int dram_init_banksize(void);