diff options
| author | Thanh Quan <[email protected]> | 2025-10-27 15:03:58 +0100 |
|---|---|---|
| committer | Jerome Forissier <[email protected]> | 2025-12-01 09:52:33 +0100 |
| commit | 85a7e45c3350afd9f7c17bb0bb2a47aa94be982d (patch) | |
| tree | a2ef4ec9df592c52b8efc59357500286003d42d4 | |
| parent | 31bf4a1c308773895a8e7ea047b3cea037e4c922 (diff) | |
net: phy: dp83869: fix STRAP_OPMODE bitmask
According to the TI DP83869HM datasheet Revision D (June 2025), section
7.6.1.41 STRAP_STS Register, the STRAP_OPMODE bitmask is bit [11:9].
Fix this.
In case the PHY is auto-detected via PHY ID registers, or not described
in DT, or, in case the PHY is described in DT but the optional DT property
"ti,op-mode" is not present, then the driver reads out the PHY functional
mode (RGMII, SGMII, ...) from hardware straps.
Currently, all upstream users of this PHY specify both DT compatible string
"ethernet-phy-id2000.a0f1" and ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>
property, therefore it seems no upstream users are affected by this bug.
The driver currently interprets bits [2:0] of STRAP_STS register as PHY
functional mode. Those bits are controlled by ANEG_DIS, ANEGSEL_0 straps
and an always-zero reserved bit. Systems that use RGMII-to-Copper functional
mode are unlikely to disable auto-negotiation via ANEG_DIS strap, or change
auto-negotiation behavior via ANEGSEL_0 strap. Therefore, even with this bug
in place, the STRAP_STS register content is likely going to be interpreted
by the driver as RGMII-to-Copper mode.
However, for a system with PHY functional mode strapping set to other mode
than RGMII-to-Copper, the driver is likely to misinterpret the strapping
as RGMII-to-Copper and misconfigure the PHY.
For example, on a system with SGMII-to-Copper strapping, the STRAP_STS
register reads as 0x0c20, but the PHY ends up being configured for
incompatible RGMII-to-Copper mode.
Fixes: f3e22eea815d ("net: phy: add TI DP83869HM ethernet driver")
Signed-off-by: Thanh Quan <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]> # Use FIELD_GET()
| -rw-r--r-- | drivers/net/phy/dp83869.c | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c index b6fb5adae1f..c60fbf26a03 100644 --- a/drivers/net/phy/dp83869.c +++ b/drivers/net/phy/dp83869.c @@ -5,6 +5,7 @@ */ #include <phy.h> +#include <linux/bitfield.h> #include <linux/compat.h> #include <malloc.h> @@ -64,7 +65,7 @@ #define DP83869_RGMII_RX_CLK_DELAY_EN BIT(0) /* STRAP_STS1 bits */ -#define DP83869_STRAP_OP_MODE_MASK GENMASK(2, 0) +#define DP83869_STRAP_OP_MODE_MASK GENMASK(11, 9) #define DP83869_STRAP_STS1_RESERVED BIT(11) #define DP83869_STRAP_MIRROR_ENABLED BIT(12) @@ -168,7 +169,7 @@ static int dp83869_set_strapped_mode(struct phy_device *phydev) if (val < 0) return val; - dp83869->mode = val & DP83869_STRAP_OP_MODE_MASK; + dp83869->mode = FIELD_GET(DP83869_STRAP_OP_MODE_MASK, val); return 0; } |
