diff options
Diffstat (limited to 'arch/arm/dts/imx95-toradex-smarc-dev.dts')
| -rw-r--r-- | arch/arm/dts/imx95-toradex-smarc-dev.dts | 277 |
1 files changed, 0 insertions, 277 deletions
diff --git a/arch/arm/dts/imx95-toradex-smarc-dev.dts b/arch/arm/dts/imx95-toradex-smarc-dev.dts deleted file mode 100644 index 5b05f256fd5..00000000000 --- a/arch/arm/dts/imx95-toradex-smarc-dev.dts +++ /dev/null @@ -1,277 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Copyright (C) 2025 Toradex - * - * https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95 - * https://www.toradex.com/products/carrier-board/smarc-development-board-kit - */ - -/dts-v1/; - -#include <dt-bindings/pwm/pwm.h> -#include "imx95-toradex-smarc.dtsi" - -/ { - model = "Toradex SMARC iMX95 on Toradex SMARC Development Board"; - compatible = "toradex,smarc-imx95-dev", - "toradex,smarc-imx95", - "fsl,imx95"; - - reg_carrier_1p8v: regulator-carrier-1p8v { - compatible = "regulator-fixed"; - regulator-max-microvolt = <1800000>; - regulator-min-microvolt = <1800000>; - regulator-name = "On-carrier 1V8"; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,bitclock-master = <&codec_dai>; - simple-audio-card,format = "i2s"; - simple-audio-card,frame-master = <&codec_dai>; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "tdx-smarc-wm8904"; - simple-audio-card,routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "IN2L", "Line In Jack", - "IN2R", "Line In Jack", - "Microphone Jack", "MICBIAS", - "IN1L", "Microphone Jack"; - simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack", - "Line", "Line In Jack"; - - codec_dai: simple-audio-card,codec { - clocks = <&scmi_clk IMX95_CLK_SAI3>; - sound-dai = <&wm8904_1a>; - }; - - simple-audio-card,cpu { - sound-dai = <&sai3>; - }; - }; -}; - -/* SMARC GBE0 */ -&enetc_port0 { - status = "okay"; -}; - -/* SMARC GBE1 */ -&enetc_port1 { - status = "okay"; -}; - -/* SMARC CAN0 */ -&flexcan1 { - status = "okay"; -}; - -/* SMARC CAN1 */ -&flexcan2 { - status = "okay"; -}; - -&gpio2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio12>, <&pinctrl_gpio13>; -}; - -&gpio4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio10>, <&pinctrl_gpio11>; -}; - -&gpio5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio2>, - <&pinctrl_gpio3>, - <&pinctrl_gpio4>, - <&pinctrl_gpio6>, - <&pinctrl_gpio8>, - <&pinctrl_gpio9>; -}; - -/* SMARC I2C_CAM0 */ -&i2c_cam0 { - status = "okay"; -}; - -/* SMARC I2C_CAM1 */ -&i2c_cam1 { - status = "okay"; -}; - -/* SMARC I2C_GP */ -&lpi2c2 { - status = "okay"; - - wm8904_1a: audio-codec@1a { - compatible = "wlf,wm8904"; - reg = <0x1a>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai3>, <&pinctrl_sai3_mclk>; - #sound-dai-cells = <0>; - clocks = <&scmi_clk IMX95_CLK_SAI3>; - clock-names = "mclk"; - AVDD-supply = <®_carrier_1p8v>; - CPVDD-supply = <®_carrier_1p8v>; - DBVDD-supply = <®_carrier_1p8v>; - DCVDD-supply = <®_carrier_1p8v>; - MICVDD-supply = <®_carrier_1p8v>; - }; - - temperature-sensor@4f { - compatible = "ti,tmp1075"; - reg = <0x4f>; - }; - - eeprom@57 { - compatible = "st,24c02", "atmel,24c02"; - reg = <0x57>; - pagesize = <16>; - }; - -}; - -/* SMARC I2C_PM */ -&lpi2c3 { - clock-frequency = <100000>; - status = "okay"; - - fan_controller: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - #pwm-cells = <2>; - - fan { - cooling-levels = <255>; - pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; - }; - }; - - /* Current measurement into module VCC */ - hwmon@40 { - compatible = "ti,ina226"; - reg = <0x40>; - shunt-resistor = <5000>; - }; -}; - -/* SMARC I2C_LCD */ -&lpi2c5 { - status = "okay"; - - i2c-mux@70 { - compatible = "nxp,pca9543"; - reg = <0x70>; - i2c-mux-idle-disconnect; - #address-cells = <1>; - #size-cells = <0>; - - /* I2C on DSI Connector Pins 4/6 */ - i2c_dsi_0: i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - /* I2C on DSI Connector Pins 52/54 */ - i2c_dsi_1: i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -/* SMARC SPI0 */ -&lpspi6 { - status = "okay"; -}; - -/* SMARC SER1, used as the Linux Console */ -&lpuart1 { - status = "okay"; -}; - -/* SMARC SER0, RS485 */ -&lpuart2 { - linux,rs485-enabled-at-boot-time; - rs485-rts-active-low; - rs485-rx-during-tx; - status = "okay"; -}; - -/* SMARC SER3, RS232 */ -&lpuart3 { - status = "okay"; -}; - -/* SMARC MDIO, shared between all ethernet ports */ -&netc_emdio { - status = "okay"; - - ethphy3: ethernet-phy@4 { - reg = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio7>; - interrupt-parent = <&gpio5>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -/* SMARC PCIE_A / M2 Key B */ -&pcie0 { - status = "okay"; -}; - -/* SMARC PCIE_B / M2 Key E */ -&pcie1 { - status = "okay"; -}; - -/* SMARC I2S0 */ -&sai3 { - status = "okay"; -}; - -/* SMARC LCD0_BKLT_PWM */ -&tpm3 { - status = "okay"; -}; - -/* SMARC LCD1_BKLT_PWM */ -&tpm4 { - status = "okay"; -}; - -/* SMARC GPIO5 as PWM */ -&tpm5 { - status = "okay"; -}; - -/* SMARC USB0 */ -&usb2 { - status = "okay"; -}; - -/* SMARC USB1..4 */ -&usb3 { - status = "okay"; -}; - -&usb3_dwc3 { - status = "okay"; -}; - -&usb3_phy { - status = "okay"; -}; - -/* SMARC SDIO */ -&usdhc2 { - status = "okay"; -}; |