1 files changed, 0 insertions, 96 deletions
diff --git a/doc/uImage.FIT/multi_spl.its b/doc/uImage.FIT/multi_spl.its
deleted file mode 100644
index 59421997441..00000000000
--- a/doc/uImage.FIT/multi_spl.its
+++ /dev/null
@@ -1,96 +0,0 @@
-/dts-v1/;
-
-/*
- * (Bogus) example FIT image description file demonstrating the usage
- * of multiple images loaded by the SPL.
- * Several binaries will be loaded at their respective load addresses.
- *
- * For booting U-Boot, "firmware" is searched first. If not found, "loadables"
- * is used to identify images to be loaded into memory. If falcon boot is
- * enabled, "kernel" is searched first. If not found, it falls back to the
- * same flow as booting U-Boot. Changing image type will result skipping
- * specific image.
- *
- * Finally the one image specifying an entry point will be entered by the SPL.
- */
-
-/ {
-	description = "multiple firmware blobs and U-Boot, loaded by SPL";
-	#address-cells = <0x1>;
-
-	images {
-
-		uboot {
-			description = "U-Boot (64-bit)";
-			type = "standalone";
-			arch = "arm64";
-			compression = "none";
-			load = <0x4a000000>;
-		};
-
-		atf {
-			description = "ARM Trusted Firmware";
-			type = "firmware";
-			arch = "arm64";
-			compression = "none";
-			load = <0x18000>;
-			entry = <0x18000>;
-		};
-
-		mgmt-firmware {
-			description = "arisc management processor firmware";
-			type = "firmware";
-			arch = "or1k";
-			compression = "none";
-			load = <0x40000>;
-		};
-
-		fdt-1 {
-			description = "Pine64+ DT";
-			type = "flat_dt";
-			compression = "none";
-			load = <0x4fa00000>;
-			arch = "arm64";
-		};
-
-		fdt-2 {
-			description = "Pine64 DT";
-			type = "flat_dt";
-			compression = "none";
-			load = <0x4fa00000>;
-			arch = "arm64";
-		};
-
-		kernel {
-			description = "4.7-rc5 kernel";
-			type = "kernel";
-			compression = "none";
-			load = <0x40080000>;
-			arch = "arm64";
-		};
-
-		initrd {
-			description = "Debian installer initrd";
-			type = "ramdisk";
-			compression = "none";
-			load = <0x4fe00000>;
-			arch = "arm64";
-		};
-	};
-
-	configurations {
-		default = "config-1";
-
-		config-1 {
-			description = "sun50i-a64-pine64-plus";
-			loadables = "uboot", "atf", "kernel", "initrd";
-			fdt = "fdt-1";
-		};
-
-		config-2 {
-			description = "sun50i-a64-pine64";
-			loadables = "uboot", "atf", "mgmt-firmware";
-			fdt = "fdt-2";
-		};
-	};
-};